提交 b9c6dcab 编写于 作者: A Andy Yan 提交者: Linus Walleij

pinctrl: rockchip: rename RK1108 to RV1108

Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
[adapted rk1108 dtsi to keep bisectability]
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 ab714cfb
......@@ -222,7 +222,7 @@
};
pinctrl: pinctrl {
compatible = "rockchip,rk1108-pinctrl";
compatible = "rockchip,rv1108-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <1>;
......
......@@ -59,7 +59,7 @@
#define GPIO_LS_SYNC 0x60
enum rockchip_pinctrl_type {
RK1108,
RV1108,
RK2928,
RK3066B,
RK3188,
......@@ -713,13 +713,13 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
return ret;
}
#define RK1108_PULL_PMU_OFFSET 0x10
#define RK1108_PULL_OFFSET 0x110
#define RK1108_PULL_PINS_PER_REG 8
#define RK1108_PULL_BITS_PER_PIN 2
#define RK1108_PULL_BANK_STRIDE 16
#define RV1108_PULL_PMU_OFFSET 0x10
#define RV1108_PULL_OFFSET 0x110
#define RV1108_PULL_PINS_PER_REG 8
#define RV1108_PULL_BITS_PER_PIN 2
#define RV1108_PULL_BANK_STRIDE 16
static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
......@@ -728,27 +728,27 @@ static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK1108_PULL_PMU_OFFSET;
*reg = RV1108_PULL_PMU_OFFSET;
} else {
*reg = RK1108_PULL_OFFSET;
*reg = RV1108_PULL_OFFSET;
*regmap = info->regmap_base;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
*reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
}
*reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RK1108_PULL_PINS_PER_REG);
*bit *= RK1108_PULL_BITS_PER_PIN;
*reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % RV1108_PULL_PINS_PER_REG);
*bit *= RV1108_PULL_BITS_PER_PIN;
}
#define RK1108_DRV_PMU_OFFSET 0x20
#define RK1108_DRV_GRF_OFFSET 0x210
#define RK1108_DRV_BITS_PER_PIN 2
#define RK1108_DRV_PINS_PER_REG 8
#define RK1108_DRV_BANK_STRIDE 16
#define RV1108_DRV_PMU_OFFSET 0x20
#define RV1108_DRV_GRF_OFFSET 0x210
#define RV1108_DRV_BITS_PER_PIN 2
#define RV1108_DRV_PINS_PER_REG 8
#define RV1108_DRV_BANK_STRIDE 16
static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
......@@ -757,19 +757,19 @@ static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = info->regmap_pmu;
*reg = RK1108_DRV_PMU_OFFSET;
*reg = RV1108_DRV_PMU_OFFSET;
} else {
*regmap = info->regmap_base;
*reg = RK1108_DRV_GRF_OFFSET;
*reg = RV1108_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
*reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
}
*reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RK1108_DRV_PINS_PER_REG;
*bit *= RK1108_DRV_BITS_PER_PIN;
*reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4);
*bit = pin_num % RV1108_DRV_PINS_PER_REG;
*bit *= RV1108_DRV_BITS_PER_PIN;
}
#define RK2928_PULL_OFFSET 0x118
......@@ -1271,7 +1271,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
case RK1108:
case RV1108:
case RK3188:
case RK3288:
case RK3368:
......@@ -1318,7 +1318,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
spin_unlock_irqrestore(&bank->slock, flags);
break;
case RK1108:
case RV1108:
case RK3188:
case RK3288:
case RK3368:
......@@ -1581,7 +1581,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
case RK1108:
case RV1108:
case RK3188:
case RK3288:
case RK3368:
......@@ -2700,7 +2700,7 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}
static struct rockchip_pin_bank rk1108_pin_banks[] = {
static struct rockchip_pin_bank rv1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
......@@ -2710,15 +2710,15 @@ static struct rockchip_pin_bank rk1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
};
static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
.pin_banks = rk1108_pin_banks,
.nr_banks = ARRAY_SIZE(rk1108_pin_banks),
.label = "RK1108-GPIO",
.type = RK1108,
static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
.pin_banks = rv1108_pin_banks,
.nr_banks = ARRAY_SIZE(rv1108_pin_banks),
.label = "RV1108-GPIO",
.type = RV1108,
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
.pull_calc_reg = rk1108_calc_pull_reg_and_bit,
.drv_calc_reg = rk1108_calc_drv_reg_and_bit,
.pull_calc_reg = rv1108_calc_pull_reg_and_bit,
.drv_calc_reg = rv1108_calc_drv_reg_and_bit,
};
static struct rockchip_pin_bank rk2928_pin_banks[] = {
......@@ -2976,8 +2976,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
{ .compatible = "rockchip,rk1108-pinctrl",
.data = (void *)&rk1108_pin_ctrl },
{ .compatible = "rockchip,rv1108-pinctrl",
.data = (void *)&rv1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册