This reverts commit 371abae8.

This data seems unreliable and causing many issues and blocking other
teams and feature implementation. Safest way is to revert that for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88081
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88039
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87671
Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Deepak M <m.deepak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

LFP brighness control from the VBT block 43 indicates which
controller is used for brightness.
LFP1 brightness control method:
Bit 7-4 = This field controller number of the brightnes controller.
0 = Controller 0
1 = Controller 1
2 = Controller 2
3 = Controller 3
Others = Reserved
Bits 3-0 = This field specifies the brightness control pin to be used on the
platform.
0 = PMIC pin is used for brightness control
1 = LPSS PWM is used for brightness control
2 = Display DDI is used for brightness control
3 = CABC method to control brightness
Others = Reserved

Adding the above fields in dev_priv->vbt and corresponding changes in
parse_backlight()

v2: Jani's review comments addressed
	- Move PWM definitions to intel_bios.h
	- Moving vbt_version to intel_vbt_data
	- Rename brightness to bl_ctrl_data
	- Logging just control_pin instead of string
	- Avoid adding vbt_version in dev_priv
	- Since only DDI option is available as of now, let control pin DDI
	affect dev_priv->vbt.backlight.present

v3: Jani's review comments addressed
	- Drop control_pin
	- Use bdb->version
	- set controller to 0 instead of using control pin define
	- check controller bounds
	- remove superfluous changes in intel_parse_bios
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

PSR (aka SRD) block is defined at VBT and currently being used.
Mainly/At-least to configure the amount of idle_frames require to get
back to PSR Entry.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.

Done using following cocci patch for each define:
@@
@@

 # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)

...
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:

  # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
  # modprobe i915
  # echo 1 > /sys/bus/pci/rescan

The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.

Fix this by removing the bogus annotation.

Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/

Fixes: 25e341cf ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>	# Can modpost be fixed?
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This patch fix spelling typo in printk within vairous
part of the code.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The knowledge about the HDMI/DVI DDI translation table was scattered
around.
  - info->hdmi_level_shift was initialized with 6, the index of the 800
    mV, 0dB translation
  - A check on the VBT value was done to ensure it wasn't overflowing
    the translation table (< 0xC)
  - The actual programming was done in intel_ddi.c

As we need to change that knowledge for Broadwell, let's gather
everything into one place.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This particular nasty presented itself while trying to register the
intelfb device (intel_fbdev.c). During the process of registering the device
the driver will disable the crtc via i9xx_crtc_disable. These will
also disable the panel using the generic mipi panel functions in
dsi_mod_vbt_generic.c. The stale MIPI generic data sequence pointers would
cause a crash within those functions. However, all of this is happening
while console_lock is held from do_register_framebuffer inside fbcon.c. Which
means that you got kernel log and just the device appearing to reboot/hang for
no apparent reason.

The fault started from the FB_EVENT_FB_REGISTERED event using the
fb_notifier_call_chain call in fbcon.c.

This regression has been introduced in

commit d3b542fc
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date:   Mon Apr 14 11:00:34 2014 +0530

    drm/i915: Add parsing support for new MIPI blocks in VBT

Cc: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NRafael Barbalho <rafael.barbalho@intel.com>
Reviewed-by: NShobhit Kumar <shobhit.kumar@intel.com>
[danvet: Add regression citation.]
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Apparently there are Apple laptops with magic smoke for a VBIOS, which
we fail to find and use. Default to having and setting up backlight in
this case.

This fixes a regression introduced by
commit c675949e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 9 11:31:37 2014 +0300

    drm/i915: do not setup backlight if not available according to VBT

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77831Reported-and-tested-by: NMatteo Cypriani <mcy@lm7.fr>
Cc: stable@vger.kernel.org # 3.15+
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

It seems by default the VBT has MIPI configuration block as well. The
Generic driver will assume always MIPI if MIPI configuration block is found.
This is causing probelm when actually there is eDP. Fix this by looking
into general definition block which will have device configurations. From here
we can figure out what is the LFP type and initialize MIPI only if MIPI
is found.

v2: Addressed review comments by Damien
    - Moved PORT definitions to intel_bios.h and renamed as DVO_PORT_MIPIA
    - renamed is_mipi to has_mipi and moved definition as suggested
    - Check has_mipi inside parse_mipi and intel_dsi_init insted of outside

v3: Make has_mipi as a bitfield as suggested
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: fold in conditions to pack everything neatly below 80 chars.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use defines, do not set anything if VBT has values unknown to us.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Be we read and chase pointers from the VBT, it is prudent to make sure
that those accesses are wholly contained within the MMIO region, or else
we may cause a kernel panic during boot.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make sure that the whole BDB section is within the MMIO region prior to
accessing it contents. That we don't read outside of the secion is left
up to the individual section parsers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This cleans up the checkpatch errors for the merged commit -

commit d3b542fc
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date:   Mon Apr 14 11:00:34 2014 +0530

    drm/i915: Add parsing support for new MIPI blocks in VBT
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The parser extracts the config block(#52) and sequence(#53) data
and store in private data structures.

v2: Address review comments by Jani
    - adjust code for the structure changes for bdb_mipi_config
    - add boundry and buffer overflow checks as suggested
    - use kmemdup instead of kmalloc and memcpy

v3: More strict check while parsing VBT
    - Ensure that at anytime we do not go beyond sequence block
      while parsing
    - On unknown element fail the whole parsing

v4: Style changes and spell check mostly as suggested by Jani
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The only supported types are none and PWM. Other values are obsolete or
reserved, don't add them.
Tested-by: NKamal Mostafa <kamal@canonical.com>
Tested-by: NMartin <bugs@mrvanes.com>
Tested-by: jrg.otte@gmail.com
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This patch reads the DRRS support and Mode type from VBT fields.
The read information will be stored in VBT struct during BIOS
parsing. The above functionality is needed for decision making
whether DRRS feature is supported in i915 driver for eDP panels.
This information helps us decide if seamless DRRS can be done
at runtime to support certain power saving features. This patch
was tested by setting necessary bit in VBT struct and merging
the new VBT with system BIOS so that we can read the value.

v2: Incorporated review comments from Chris Wilson
Removed "intel_" as a prefix for DRRS specific declarations.

v3: Incorporated Jani's review comments
Removed function which deducts drrs mode from panel_type. Modified some
print statements. Made changes to use DRRS_NOT_SUPPORTED as 0 instead of -1.

v4: Incorporated Jani's review comments.
Modifications around setting vbt drrs_type.
Signed-off-by: NPradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
[danvet: Drop the misleading/redundant comment about the added drrs
field in the vbt struct as discussed with Jani on irc.]
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

MIPI Block #52 which provides configuration details for the MIPI panel
including dphy settings as per panel and tcon specs

Block #53 gives information on panel enable sequences

v2: Address review comemnts from Jani
    - Move panel ids from intel_dsi.h to intel_bios.h
    - bdb_mipi_config structure improvements for cleaner code
    - Adding units for the pps delays, all in ms
    - change data structure to be more cleaner and simple

v3: Corrected the unit for pps delays as 100us
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With 20+ module parameters, I think referring to them via a struct
improves clarity over just having a bunch of globals. While at it, move
the parameter initialization and definitions into a new file
i915_params.c to reduce clutter in i915_drv.c.

Apart from the ill-named i915_enable_rc6, i915_enable_fbc and
i915_enable_ppgtt parameters, for which we lose the "i915_" prefix
internally, the module parameters now look the same both on the kernel
command line and in code. For example, "i915.modeset".

The downsides of the change are losing static on a couple of variables
and not having the initialization and module_param_named() right next to
each other. On the other hand, all module parameters are now defined in
one place at i915_params.c. Plus you can do this to find all module
parameter references:

$ git grep "i915\." -- drivers/gpu/drm/i915

v2:
- move the definitions into a new file
- s/i915_params/i915/
- make i915_try_reset i915.reset, for consistency
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't actually do anything with the information yet, but parse and
log what's in the VBT.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Store the SSC refclock frequency in kHz to get more accuracy. Currently
we're pretending that 66 MHz is ~66000 kHz, when in fact it is actually
~66667 kHz. By storing the less rounded kHz value we get a much better
accuracy for out pixel clock calculations.

Cc: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We had been using a DMI table workaround to select the right
frequency for devices, but this is fragile and must be updated
with every new platform.

Instead the default case when VBT is missing is changed to use
120MHz clock for LVDS SSC for these generations.

The docs for 2010-Core, SandyBridge, and IvyBridge all indicate
that the reference frequency for LVDS is 120MHz:

"2010 Core"
http://intellinuxgraphics.org/IHD_OS_Vol3_Part3r2.pdf
page 38
Reference Frequency: 120MHz for CRT and LVDS.  100MHz for the FDI.

"2011 SandyBridge"
http://intellinuxgraphics.org/documentation/SNB/IHD_OS_Vol3_Part3.pdf
page 33
Reference Frequency: 120MHz for CRT, HDMI, LVDS.  100MHz for the FDI.

"2012 IvyBridge"
http://intellinuxgraphics.org/documentation/IVB/IHD_OS_Vol3_Part4.pdf
page 27
Reference Frequency: 120 MHz for CRT, HDMI, LVDS, 100MHz for the FDI.
Signed-off-by: NDuncan Laurie <dlaurie@chromium.org>
[olof: Fixup for recent base, switched from if/else to single call]
Signed-off-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It only controls the setting of the vbt.edp_support variable, which in
turn only controls one debug output plus can also force-disable the
lvds output.

Since the value only restricted this logic to mobile ilk there's the
slight risk that this will break lvds on desktop ilk or on snb/ivb
platforms. But with the vbt it's better when we know what's going on
here, so let's rip it out and see what happens.

Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's no reason to init a DP connector if the encoder just supports
HDMI: we'll just waste hundreds and hundreds of cycles trying to do DP
AUX transactions to detect if there's something there. Same goes for a
DP connector that doesn't support HDMI, but I'm not sure these
actually exist.

v2: - Use bit fields
    - Remove useless identation level
    - Replace DRM_ERROR with DRM_DEBUG_KMS
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our code makes a lot of assumptions regarding what each DDI port
actually supports, and the VBT should tell us what is really happening
in the hardware. So parse the information provided by the VBT and
check if any of our assumptions is wrong.

Our driver also has a history of not really trusting the VBT, so a
WARN here could mean that:
 a) our coding assumptions are wrong
 b) the VBT is wrong
 c) we're incorrectly parsing the VBT
 d) the checks are wrong

But I really hope we won't ever trigger any of those WARNs.

v2: Don't check the redundant "Capabilities" field from byte 24 since
    it doesn't seem to be used.
v3: Rebase
v4: Replace WARN with DRM_DEBUG_KMS
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our code currently assumes that port X will use the DP AUX channel X
and the DDC pin X. The VBT should tell us how things are mapped, so
add some WARNs in case we discover our assumptions are wrong (or in
case the VBT is just wrong, which is also perfectly possible).

Why would someone wire port B to AUX C and DDC D?

v2: Rebase
v3: Convert WARNs to DRM_DEBUG_KMS
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We currently use the recommended values from BSpec, but the VBT
specifies the correct value to use for the hardware we have, so use
it. We also fall back to the recommended value in case we can't find
the VBT.

In addition, this code also provides some infrastructure to parse more
information about the DDI ports. There's a lot more information we
could extract and use in the future.

v2: - Move some code to init_vbt_defaults.
v3: - Rebase
    - Clarify the "DVO Port" matching code
v4: - Use I915_MAX_PORTS
    - Change the HAS_DDI checks
    - Replace DRM_ERROR with DRM_DEBUG_KMS
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We currently treat the child_device_config as a simple struct, but
this is not correct: new BDB versions change the meaning of some
offsets, so the struct needs to be adjusted for each version.

Since there are too many changes (today we're in version 170!), making
a big versioned union would be too complicated, so child_device_config
is now a union of 3 things: (i) a "raw" byte array that's safe to use
anywhere; (ii)  an "old" structure that's the one we've been using and
should be safe to keep in the SDVO and TV code; and (iii) a "common"
structure that should contain only fields that are common for all the
known VBT versions.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Initial parsing of the VBT MIPI block. For now, just store the panel id
if found.

Note: Again there seems to be no documentation for this piece of lore.
The doc situation for byt+ is just a bad joke :(
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_i915_private is getting bigger and bigger when adding new vbt stuff.
So, the better way of getting drm_i915_private organized is to create
a special structure for vbt stuff.

v2: Basically conflicts fixes
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Check the VBT to see if the machine has inverted FDI RX polarity on
CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2
registers.

This should fix some machines that were showing black screens on all
outputs.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Interrupts, clock gating, LVDS, and GMBUS are all within the, "this will
be bad for CPU" range when we have PCH_NOP.

There is a bit of a hack in init clock gating. We want to do most of the
clock gating, but the part we skip will hang the system. It could
probably be abstracted a bit better, but I don't feel it's too
unsightly.

v2: Use inverse HAS_PCH_NOP check (Jani)

v3: Actually do what I claimed in v2 (spotted by Daniel)
Merge Ivybridge IRQ handler PCH check to decrease whitespace (Daniel)
Move LVDS bail into this patch (Ben)

v4: logical rebase conflict resolution with SDEIIR (Ben)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

Brush up patch a bit and resolve conflicts:
- Adjust PCH_NOP checks due to Egbert's hpd handling rework.
- Addd a PCH_NOP check in the irq uninstall code.
- Resolve conflicts with Paulo's SDE irq handling race fix.

v5: Drop the added hunks in the ilk irq handler again, they're bogus.
OOps.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit 500a8cc4
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Wed Jan 13 11:19:52 2010 +0800

    drm/i915: parse eDP panel color depth from VBT block

originally introduced parsing bpp for eDP from VBT, with a default of 18
bpp if the eDP BIOS data block is not present. Turns out that default seems
to break the Macbook Pro with retina display, as noted in

commit 4344b813
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

Since we can't ignore bpc settings from VBT completely after all, get rid
of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is
missing from VBT.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: NHenrik Rydberg <rydberg@euromail.se>
[danvet: paste in the updated commit message from irc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ILK+ have this register on the PCH. This check was triggering unclaimed
writes.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

Remove redundant DRM UAPI header #inclusions from drivers/gpu/.

Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h).  They are now #included via drmP.h and drm_crtc.h via a preceding
patch.

Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..."  work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDave Jones <davej@redhat.com>

These are unintuitive.  These are type bool and return -1 casted to true
on failure.  Let's just make it return an int.  The callers don't care,
but let's change this as a cleanup.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Somehow the BIOS manages to screw things up when copying the VBT
around, because the one we scrap from the VBIOS rom actually works.

Cc: stable@kernel.org
Tested-by: NMarkus Heinz <markus.heinz@uni-dortmund.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28812Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>