提交 ab5c608b 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915: Don't touch South Display when PCH_NOP

Interrupts, clock gating, LVDS, and GMBUS are all within the, "this will
be bad for CPU" range when we have PCH_NOP.

There is a bit of a hack in init clock gating. We want to do most of the
clock gating, but the part we skip will hang the system. It could
probably be abstracted a bit better, but I don't feel it's too
unsightly.

v2: Use inverse HAS_PCH_NOP check (Jani)

v3: Actually do what I claimed in v2 (spotted by Daniel)
Merge Ivybridge IRQ handler PCH check to decrease whitespace (Daniel)
Move LVDS bail into this patch (Ben)

v4: logical rebase conflict resolution with SDEIIR (Ben)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

Brush up patch a bit and resolve conflicts:
- Adjust PCH_NOP checks due to Egbert's hpd handling rework.
- Addd a PCH_NOP check in the irq uninstall code.
- Resolve conflicts with Paulo's SDE irq handling race fix.

v5: Drop the added hunks in the ilk irq handler again, they're bogus.
OOps.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 40c7ead9
......@@ -758,7 +758,7 @@ static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 de_iir, gt_iir, de_ier, pm_iir, sde_ier;
u32 de_iir, gt_iir, de_ier, pm_iir, sde_ier = 0;
irqreturn_t ret = IRQ_NONE;
int i;
......@@ -773,9 +773,11 @@ static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
* able to process them after we restore SDEIER (as soon as we restore
* it, we'll get an interrupt if SDEIIR still has something to process
* due to its back queue). */
sde_ier = I915_READ(SDEIER);
I915_WRITE(SDEIER, 0);
POSTING_READ(SDEIER);
if (!HAS_PCH_NOP(dev)) {
sde_ier = I915_READ(SDEIER);
I915_WRITE(SDEIER, 0);
POSTING_READ(SDEIER);
}
gt_iir = I915_READ(GTIIR);
if (gt_iir) {
......@@ -802,7 +804,7 @@ static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
}
/* check event from PCH */
if (de_iir & DE_PCH_EVENT_IVB) {
if (!HAS_PCH_NOP(dev) && (de_iir & DE_PCH_EVENT_IVB)) {
u32 pch_iir = I915_READ(SDEIIR);
cpt_irq_handler(dev, pch_iir);
......@@ -825,8 +827,10 @@ static irqreturn_t ivybridge_irq_handler(int irq, void *arg)
I915_WRITE(DEIER, de_ier);
POSTING_READ(DEIER);
I915_WRITE(SDEIER, sde_ier);
POSTING_READ(SDEIER);
if (!HAS_PCH_NOP(dev)) {
I915_WRITE(SDEIER, sde_ier);
POSTING_READ(SDEIER);
}
return ret;
}
......@@ -2027,6 +2031,9 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
I915_WRITE(GTIER, 0x0);
POSTING_READ(GTIER);
if (HAS_PCH_NOP(dev))
return;
/* south display irq */
I915_WRITE(SDEIMR, 0xffffffff);
/*
......@@ -2112,6 +2119,10 @@ static void ibx_irq_postinstall(struct drm_device *dev)
mask = SDE_GMBUS | SDE_AUX_MASK;
else
mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
if (HAS_PCH_NOP(dev))
return;
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
I915_WRITE(SDEIMR, ~mask);
}
......@@ -2306,6 +2317,9 @@ static void ironlake_irq_uninstall(struct drm_device *dev)
I915_WRITE(GTIER, 0x0);
I915_WRITE(GTIIR, I915_READ(GTIIR));
if (HAS_PCH_NOP(dev))
return;
I915_WRITE(SDEIMR, 0xffffffff);
I915_WRITE(SDEIER, 0x0);
I915_WRITE(SDEIIR, I915_READ(SDEIIR));
......
......@@ -692,6 +692,9 @@ intel_parse_bios(struct drm_device *dev)
struct bdb_header *bdb = NULL;
u8 __iomem *bios = NULL;
if (HAS_PCH_NOP(dev))
return -ENODEV;
init_vbt_defaults(dev_priv);
/* XXX Should this validation be moved to intel_opregion.c? */
......
......@@ -522,7 +522,9 @@ int intel_setup_gmbus(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
if (HAS_PCH_SPLIT(dev))
if (HAS_PCH_NOP(dev))
return 0;
else if (HAS_PCH_SPLIT(dev))
dev_priv->gpio_mmio_base = PCH_GPIOA - GPIOA;
else if (IS_VALLEYVIEW(dev))
dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
......
......@@ -3890,7 +3890,8 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
snpcr |= GEN6_MBC_SNPCR_MED;
I915_WRITE(GEN6_MBCUNIT_SNPCR, snpcr);
cpt_init_clock_gating(dev);
if (!HAS_PCH_NOP(dev))
cpt_init_clock_gating(dev);
gen6_check_mch_setup(dev);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册