1. 05 6月, 2014 1 次提交
  2. 20 5月, 2014 2 次提交
    • P
      mm/memblock: add physical memory list · 70210ed9
      Philipp Hachtmann 提交于
      Add the physmem list to the memblock structure. This list only exists
      if HAVE_MEMBLOCK_PHYS_MAP is selected and contains the unmodified
      list of physically available memory. It differs from the memblock
      memory list as it always contains all memory ranges even if the
      memory has been restricted, e.g. by use of the mem= kernel parameter.
      Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com>
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      70210ed9
    • P
      mm/memblock: Do some refactoring, enhance API · f1af9d3a
      Philipp Hachtmann 提交于
      Refactor the memblock code and extend the memblock API to make it
      more flexible. With the extended API it is simple to define and
      work with additional memory lists.
      
      The static functions memblock_add_region and __memblock_remove are
      renamed to memblock_add_range and meblock_remove_range and added to
      the memblock API.
      
      The __next_free_mem_range and __next_free_mem_range_rev functions
      are replaced with calls to the more generic list walkers
      __next_mem_range and __next_mem_range_rev.
      
      To walk an arbitrary memory list two new macros for_each_mem_range
      and for_each_mem_range_rev are added. These new macros are used
      to define for_each_free_mem_range and for_each_free_mem_range_reverse.
      Signed-off-by: NPhilipp Hachtmann <phacht@linux.vnet.ibm.com>
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      f1af9d3a
  3. 12 3月, 2014 1 次提交
  4. 24 1月, 2014 1 次提交
  5. 22 1月, 2014 6 次提交
    • G
      mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODES · b1154233
      Grygorii Strashko 提交于
      It's recommended to use NUMA_NO_NODE everywhere to select "process any
      node" behavior or to indicate that "no node id specified".
      
      Hence, update __next_free_mem_range*() API's to accept both NUMA_NO_NODE
      and MAX_NUMNODES, but emit warning once on MAX_NUMNODES, and correct
      corresponding API's documentation to describe new behavior.  Also,
      update other memblock/nobootmem APIs where MAX_NUMNODES is used
      dirrectly.
      
      The change was suggested by Tejun Heo.
      Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Christoph Lameter <cl@linux-foundation.org>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Paul Walmsley <paul@pwsan.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Tony Lindgren <tony@atomide.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b1154233
    • G
      mm/memblock: reorder parameters of memblock_find_in_range_node · 87029ee9
      Grygorii Strashko 提交于
      Reorder parameters of memblock_find_in_range_node to be consistent with
      other memblock APIs.
      
      The change was suggested by Tejun Heo <tj@kernel.org>.
      Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Christoph Lameter <cl@linux-foundation.org>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Paul Walmsley <paul@pwsan.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Tony Lindgren <tony@atomide.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      87029ee9
    • T
      memblock, mem_hotplug: make memblock skip hotpluggable regions if needed · 55ac590c
      Tang Chen 提交于
      Linux kernel cannot migrate pages used by the kernel.  As a result,
      hotpluggable memory used by the kernel won't be able to be hot-removed.
      To solve this problem, the basic idea is to prevent memblock from
      allocating hotpluggable memory for the kernel at early time, and arrange
      all hotpluggable memory in ACPI SRAT(System Resource Affinity Table) as
      ZONE_MOVABLE when initializing zones.
      
      In the previous patches, we have marked hotpluggable memory regions with
      MEMBLOCK_HOTPLUG flag in memblock.memory.
      
      In this patch, we make memblock skip these hotpluggable memory regions
      in the default top-down allocation function if movable_node boot option
      is specified.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
      Cc: Chen Tang <imtangchen@gmail.com>
      Cc: Gong Chen <gong.chen@linux.intel.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Liu Jiang <jiang.liu@huawei.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
      Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      55ac590c
    • T
      memblock: make memblock_set_node() support different memblock_type · e7e8de59
      Tang Chen 提交于
      [sfr@canb.auug.org.au: fix powerpc build]
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
      Cc: Chen Tang <imtangchen@gmail.com>
      Cc: Gong Chen <gong.chen@linux.intel.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Liu Jiang <jiang.liu@huawei.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
      Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e7e8de59
    • T
      memblock, mem_hotplug: introduce MEMBLOCK_HOTPLUG flag to mark hotpluggable regions · 66b16edf
      Tang Chen 提交于
      In find_hotpluggable_memory, once we find out a memory region which is
      hotpluggable, we want to mark them in memblock.memory.  So that we could
      control memblock allocator not to allocte hotpluggable memory for the
      kernel later.
      
      To achieve this goal, we introduce MEMBLOCK_HOTPLUG flag to indicate the
      hotpluggable memory regions in memblock and a function
      memblock_mark_hotplug() to mark hotpluggable memory if we find one.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
      Cc: Chen Tang <imtangchen@gmail.com>
      Cc: Gong Chen <gong.chen@linux.intel.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Liu Jiang <jiang.liu@huawei.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
      Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      66b16edf
    • T
      memblock, numa: introduce flags field into memblock · 66a20757
      Tang Chen 提交于
      There is no flag in memblock to describe what type the memory is.
      Sometimes, we may use memblock to reserve some memory for special usage.
      And we want to know what kind of memory it is.  So we need a way to
      
      In hotplug environment, we want to reserve hotpluggable memory so the
      kernel won't be able to use it.  And when the system is up, we have to
      free these hotpluggable memory to buddy.  So we need to mark these
      memory first.
      
      In order to do so, we need to mark out these special memory in memblock.
      In this patch, we introduce a new "flags" member into memblock_region:
      
         struct memblock_region {
                 phys_addr_t base;
                 phys_addr_t size;
                 unsigned long flags;		/* This is new. */
         #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
                 int nid;
         #endif
         };
      
      This patch does the following things:
      1) Add "flags" member to memblock_region.
      2) Modify the following APIs' prototype:
      	memblock_add_region()
      	memblock_insert_region()
      3) Add memblock_reserve_region() to support reserve memory with flags, and keep
         memblock_reserve()'s prototype unmodified.
      4) Modify other APIs to support flags, but keep their prototype unmodified.
      
      The idea is from Wen Congyang <wency@cn.fujitsu.com> and Liu Jiang <jiang.liu@huawei.com>.
      Suggested-by: NWen Congyang <wency@cn.fujitsu.com>
      Suggested-by: NLiu Jiang <jiang.liu@huawei.com>
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
      Cc: Chen Tang <imtangchen@gmail.com>
      Cc: Gong Chen <gong.chen@linux.intel.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
      Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      66a20757
  6. 13 11月, 2013 1 次提交
    • T
      mm/memblock.c: introduce bottom-up allocation mode · 79442ed1
      Tang Chen 提交于
      The Linux kernel cannot migrate pages used by the kernel.  As a result,
      kernel pages cannot be hot-removed.  So we cannot allocate hotpluggable
      memory for the kernel.
      
      ACPI SRAT (System Resource Affinity Table) contains the memory hotplug
      info.  But before SRAT is parsed, memblock has already started to allocate
      memory for the kernel.  So we need to prevent memblock from doing this.
      
      In a memory hotplug system, any numa node the kernel resides in should be
      unhotpluggable.  And for a modern server, each node could have at least
      16GB memory.  So memory around the kernel image is highly likely
      unhotpluggable.
      
      So the basic idea is: Allocate memory from the end of the kernel image and
      to the higher memory.  Since memory allocation before SRAT is parsed won't
      be too much, it could highly likely be in the same node with kernel image.
      
      The current memblock can only allocate memory top-down.  So this patch
      introduces a new bottom-up allocation mode to allocate memory bottom-up.
      And later when we use this allocation direction to allocate memory, we
      will limit the start address above the kernel.
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Acked-by: NToshi Kani <toshi.kani@hp.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Jiang Liu <jiang.liu@huawei.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      79442ed1
  7. 12 9月, 2013 1 次提交
    • Y
      memblock, numa: binary search node id · e76b63f8
      Yinghai Lu 提交于
      Current early_pfn_to_nid() on arch that support memblock go over
      memblock.memory one by one, so will take too many try near the end.
      
      We can use existing memblock_search to find the node id for given pfn,
      that could save some time on bigger system that have many entries
      memblock.memory array.
      
      Here are the timing differences for several machines.  In each case with
      the patch less time was spent in __early_pfn_to_nid().
      
                              3.11-rc5        with patch      difference (%)
                              --------        ----------      --------------
      UV1: 256 nodes  9TB:     411.66          402.47         -9.19 (2.23%)
      UV2: 255 nodes 16TB:    1141.02         1138.12         -2.90 (0.25%)
      UV2:  64 nodes  2TB:     128.15          126.53         -1.62 (1.26%)
      UV2:  32 nodes  2TB:     121.87          121.07         -0.80 (0.66%)
                              Time in seconds.
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Cc: Tejun Heo <tj@kernel.org>
      Acked-by: NRuss Anderson <rja@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e76b63f8
  8. 03 3月, 2013 1 次提交
    • Y
      x86, ACPI, mm: Revert movablemem_map support · 20e6926d
      Yinghai Lu 提交于
      Tim found:
      
        WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
        Hardware name: S2600CP
        sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
        smpboot: Booting Node   1, Processors  #1
        Modules linked in:
        Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
        Call Trace:
          set_cpu_sibling_map+0x279/0x449
          start_secondary+0x11d/0x1e5
      
      Don Morris reproduced on a HP z620 workstation, and bisected it to
      commit e8d19552 ("acpi, memory-hotplug: parse SRAT before memblock
      is ready")
      
      It turns out movable_map has some problems, and it breaks several things
      
      1. numa_init is called several times, NOT just for srat. so those
      	nodes_clear(numa_nodes_parsed)
      	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
         can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
         and make fall back path working.
      
      2. simply split acpi_numa_init to early_parse_srat.
         a. that early_parse_srat is NOT called for ia64, so you break ia64.
         b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
      	     set_apicid_to_node(i, NUMA_NO_NODE)
           still left in numa_init. So it will just clear result from early_parse_srat.
           it should be moved before that....
         c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
             early before override from INITRD is settled.
      
      3. that patch TITLE is total misleading, there is NO x86 in the title,
         but it changes critical x86 code. It caused x86 guys did not
         pay attention to find the problem early. Those patches really should
         be routed via tip/x86/mm.
      
      4. after that commit, following range can not use movable ram:
        a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
        b. initrd... it will be freed after booting, so it could be on movable...
        c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
      	anymore.
        d. init_mem_mapping: can not put page table high anymore.
        e. initmem_init: vmemmap can not be high local node anymore. That is
           not good.
      
      If node is hotplugable, the mem related range like page table and
      vmemmap could be on the that node without problem and should be on that
      node.
      
      We have workaround patch that could fix some problems, but some can not
      be fixed.
      
      So just remove that offending commit and related ones including:
      
       f7210e6c ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
          protect movablecore_map in memblock_overlaps_region().")
      
       01a178a9 ("acpi, memory-hotplug: support getting hotplug info from
          SRAT")
      
       27168d38 ("acpi, memory-hotplug: extend movablemem_map ranges to
          the end of node")
      
       e8d19552 ("acpi, memory-hotplug: parse SRAT before memblock is
          ready")
      
       fb06bc8e ("page_alloc: bootmem limit with movablecore_map")
      
       42f47e27 ("page_alloc: make movablemem_map have higher priority")
      
       6981ec31 ("page_alloc: introduce zone_movable_limit[] to keep
          movable limit for nodes")
      
       34b71f1e ("page_alloc: add movable_memmap kernel parameter")
      
       4d59a751 ("x86: get pg_data_t's memory from other node")
      
      Later we should have patches that will make sure kernel put page table
      and vmemmap on local node ram instead of push them down to node0.  Also
      need to find way to put other kernel used ram to local node ram.
      Reported-by: NTim Gardner <tim.gardner@canonical.com>
      Reported-by: NDon Morris <don.morris@hp.com>
      Bisected-by: NDon Morris <don.morris@hp.com>
      Tested-by: NDon Morris <don.morris@hp.com>
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Thomas Renninger <trenn@suse.de>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      20e6926d
  9. 24 2月, 2013 2 次提交
  10. 30 1月, 2013 1 次提交
  11. 25 10月, 2012 1 次提交
  12. 09 10月, 2012 1 次提交
  13. 12 7月, 2012 1 次提交
    • Y
      memblock: free allocated memblock_reserved_regions later · 29f67386
      Yinghai Lu 提交于
      memblock_free_reserved_regions() calls memblock_free(), but
      memblock_free() would double reserved.regions too, so we could free the
      old range for reserved.regions.
      
      Also tj said there is another bug which could be related to this.
      
      | I don't think we're saving any noticeable
      | amount by doing this "free - give it to page allocator - reserve
      | again" dancing.  We should just allocate regions aligned to page
      | boundaries and free them later when memblock is no longer in use.
      
      in that case, when DEBUG_PAGEALLOC, will get panic:
      
           memblock_free: [0x0000102febc080-0x0000102febf080] memblock_free_reserved_regions+0x37/0x39
        BUG: unable to handle kernel paging request at ffff88102febd948
        IP: [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
        PGD 4826063 PUD cf67a067 PMD cf7fa067 PTE 800000102febd160
        Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
        CPU 0
        Pid: 0, comm: swapper Not tainted 3.5.0-rc2-next-20120614-sasha #447
        RIP: 0010:[<ffffffff836a5774>]  [<ffffffff836a5774>] __next_free_mem_range+0x9b/0x155
      
      See the discussion at https://lkml.org/lkml/2012/6/13/469
      
      So try to allocate with PAGE_SIZE alignment and free it later.
      Reported-by: NSasha Levin <levinsasha928@gmail.com>
      Acked-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      29f67386
  14. 09 12月, 2011 8 次提交
    • T
      memblock: Reimplement memblock allocation using reverse free area iterator · 7bd0b0f0
      Tejun Heo 提交于
      Now that all early memory information is in memblock when enabled, we
      can implement reverse free area iterator and use it to implement NUMA
      aware allocator which is then wrapped for simpler variants instead of
      the confusing and inefficient mending of information in separate NUMA
      aware allocator.
      
      Implement for_each_free_mem_range_reverse(), use it to reimplement
      memblock_find_in_range_node() which in turn is used by all allocators.
      
      The visible allocator interface is inconsistent and can probably use
      some cleanup too.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      7bd0b0f0
    • T
      memblock: Kill early_node_map[] · 0ee332c1
      Tejun Heo 提交于
      Now all ARCH_POPULATES_NODE_MAP archs select HAVE_MEBLOCK_NODE_MAP -
      there's no user of early_node_map[] left.  Kill early_node_map[] and
      replace ARCH_POPULATES_NODE_MAP with HAVE_MEMBLOCK_NODE_MAP.  Also,
      relocate for_each_mem_pfn_range() and helper from mm.h to memblock.h
      as page_alloc.c would no longer host an alternative implementation.
      
      This change is ultimately one to one mapping and shouldn't cause any
      observable difference; however, after the recent changes, there are
      some functions which now would fit memblock.c better than page_alloc.c
      and dependency on HAVE_MEMBLOCK_NODE_MAP instead of HAVE_MEMBLOCK
      doesn't make much sense on some of them.  Further cleanups for
      functions inside HAVE_MEMBLOCK_NODE_MAP in mm.h would be nice.
      
      -v2: Fix compile bug introduced by mis-spelling
       CONFIG_HAVE_MEMBLOCK_NODE_MAP to CONFIG_MEMBLOCK_HAVE_NODE_MAP in
       mmzone.h.  Reported by Stephen Rothwell.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Chen Liqin <liqin.chen@sunplusct.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      0ee332c1
    • T
      memblock: Implement memblock_add_node() · 7fb0bc3f
      Tejun Heo 提交于
      Implement memblock_add_node() which can add a new memblock memory
      region with specific node ID.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      7fb0bc3f
    • T
      memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users · 1aadc056
      Tejun Heo 提交于
      The only function of memblock_analyze() is now allowing resize of
      memblock region arrays.  Rename it to memblock_allow_resize() and
      update its users.
      
      * The following users remain the same other than renaming.
      
        arm/mm/init.c::arm_memblock_init()
        microblaze/kernel/prom.c::early_init_devtree()
        powerpc/kernel/prom.c::early_init_devtree()
        openrisc/kernel/prom.c::early_init_devtree()
        sh/mm/init.c::paging_init()
        sparc/mm/init_64.c::paging_init()
        unicore32/mm/init.c::uc32_memblock_init()
      
      * In the following users, analyze was used to update total size which
        is no longer necessary.
      
        powerpc/kernel/machine_kexec.c::reserve_crashkernel()
        powerpc/kernel/prom.c::early_init_devtree()
        powerpc/mm/init_32.c::MMU_init()
        powerpc/mm/tlb_nohash.c::__early_init_mmu()  
        powerpc/platforms/ps3/mm.c::ps3_mm_add_memory()
        powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups()
        sh/kernel/machine_kexec.c::reserve_crashkernel()
      
      * x86/kernel/e820.c::memblock_x86_fill() was directly setting
        memblock_can_resize before populating memblock and calling analyze
        afterwards.  Call memblock_allow_resize() before start populating.
      
      memblock_can_resize is now static inside memblock.c.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      1aadc056
    • T
      memblock: Track total size of regions automatically · 1440c4e2
      Tejun Heo 提交于
      Total size of memory regions was calculated by memblock_analyze()
      requiring explicitly calling the function between operations which can
      change memory regions and possible users of total size, which is
      cumbersome and fragile.
      
      This patch makes each memblock_type track total size automatically
      with minor modifications to memblock manipulation functions and remove
      requirements on calling memblock_analyze().  [__]memblock_dump_all()
      now also dumps the total size of reserved regions.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      1440c4e2
    • T
      memblock: Kill memblock_init() · fe091c20
      Tejun Heo 提交于
      memblock_init() initializes arrays for regions and memblock itself;
      however, all these can be done with struct initializers and
      memblock_init() can be removed.  This patch kills memblock_init() and
      initializes memblock with struct initializer.
      
      The only difference is that the first dummy entries don't have .nid
      set to MAX_NUMNODES initially.  This doesn't cause any behavior
      difference.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      fe091c20
    • T
      memblock: Add __memblock_dump_all() · 4ff7b82f
      Tejun Heo 提交于
      Add __memblock_dump_all() which dumps memblock configuration whether
      memblock_debug is enabled or not.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      4ff7b82f
    • T
      memblock: Make memblock_{add|remove|free|reserve}() return int and update prototypes · 581adcbe
      Tejun Heo 提交于
      memblock_{add|remove|free|reserve}() return either 0 or -errno but had
      long as return type.  Chage it to int.  Also, drop 'extern' from all
      prototypes in memblock.h - they are unnecessary and used
      inconsistently (especially if mm.h is included in the picture).
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      581adcbe
  15. 01 11月, 2011 1 次提交
  16. 15 7月, 2011 8 次提交
  17. 14 7月, 2011 2 次提交
  18. 25 5月, 2011 1 次提交
    • Y
      memblock: add error return when CONFIG_HAVE_MEMBLOCK is not set · 95dde501
      Yinghai Lu 提交于
      On larger systems, information in the kernel log is lost because there is
      so much early text printed, that it overflows the static log buffer before
      the log_buf_len kernel parameter can be processed, and a bigger log buffer
      allocated.
      
      Distros are relunctant to increase memory usage by increasing the size of
      the static log buffer, so minimize the problem by allocating the new log
      buffer as early as possible.
      
      This patch:
      
      Add an error return if CONFIG_HAVE_MEMBLOCK is not set instead of having
      to add #ifdef CONFIG_HAVE_MEMBLOCK around blocks of code calling that
      function.
      Signed-off-by: NMike Travis <travis@sgi.com>
      Cc: Yinghai Lu <yhlu.kernel@gmail.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Jack Steiner <steiner@sgi.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      95dde501