- 11 8月, 2011 3 次提交
-
-
由 Jeff Kirsher 提交于
Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/ and the necessary Kconfig and Makfile changes. The au1000 (Alchemy) driver was also moved into the same directory even though it is not a "Lance" driver. CC: Peter Maydell <pmaydell@chiark.greenend.org.uk> CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> CC: "Maciej W. Rozycki" <macro@linux-mips.org> CC: Donald Becker <becker@scyld.com> CC: Sam Creasey <sammy@users.qual.net> CC: Miguel de Icaza <miguel@nuclecu.unam.mx> CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de> CC: Don Fry <pcnet32@frontier.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Russell King <linux@arm.linux.org.uk> CC: David Davies <davies@maniac.ultranet.com> CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de> CC: Pete Popov <ppopov@embeddedalley.com> CC: David Hinds <dahinds@users.sourceforge.net> CC: "Roger C. Pao" <rpao@paonet.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary Kconfig and Makefile changes. Did not move the following drivers becuase they use a non-3Com chipset: 3c503, 3c505, 3c507, 3c523 and 3c527 CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> CC: David Dillow <dave@thedillows.org> CC: Jes Sorensen <jes@trained-monkey.org> CC: Alan Cox <alan@linux.intel.com> CC: David Hinds <dahinds@users.sourceforge.net> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NDavid Dillow <dave@thedillows.org>
-
由 Jeff Kirsher 提交于
This is the initial patch to organize the drivers/net directory structure and networking device driver config options. This patch does the following: - add drivers/net/ethernet/Kconfig - integrate the new files into the existing config Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 8月, 2011 27 次提交
-
-
由 David S. Miller 提交于
-
由 Richard Cochran 提交于
The dp83640 buffers receive time stamps from special PHY status frames, matching them to received PTP packets in a work queue. Because the timeout for orphaned time stamps is so long and the buffer is so small, the driver can drop time stamps under moderate PTP traffic. This commit fixes the issue by decreasing the timeout to (at least) one timer tick and increasing the buffer size. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
After resetting the time, the PPS signals on the FIPER output channels are incorrectly offset from the clock time, as can be readily verified by a looping back the FIPER to the external time stamp input. Despite its name, setting the "Fiper Realignment Disable" bit seems to fix the problem, at least on the P2020. Also, following the example code from the Freescale BSP, it is not really necessary to disable and re-enable the timer in order to reprogram the FIPER. (The documentation is rather unclear on this point. It seems that writing to the alarm register also disables the FIPER.) Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 huajun li 提交于
Executing cmd 'rmmod rtl8150' does not return(if your device connects to host), the root cause is tasklet_disable() causes tasklet_kill() block, remove it from rtl8150_disconnect(). Signed-off-by: NHuajun Li <huajun.li.lee@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Make sure skb dst has reference when moving to another context. Currently, I don't see protocols that can hit it when sending broadcasts/multicasts to loopback using noref dsts, so it is just a precaution. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
The raw sockets can provide source address for routing but their privileges are not considered. We can provide non-local source address, make sure the FLOWI_FLAG_ANYSRC flag is set if socket has privileges for this, i.e. based on hdrincl (IP_HDRINCL) and transparent flags. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
TCP in some cases uses different global (raw) socket to send RST and ACK. The transparent flag is not set there. Currently, it is a problem for rerouting after the previous change. Fix it by simplifying the checks in ip_route_me_harder and use FLOWI_FLAG_ANYSRC even for sockets. It looks safe because the initial routing allowed this source address to be used and now we just have to make sure the packet is rerouted. As a side effect this also allows rerouting for normal raw sockets that use spoofed source addresses which was not possible even before we eliminated the ip_route_input call. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o To support vlan lro, driver need to program ip address in device. o Same ip addresses need to be program after fw recovery, so sotre them in list. o In case of vlan packet, include vlan header length while calculating ip and tcp headers. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Currently userland will barf when including linux/netlink.h unless it precisely includes sys/socket.h first. The issue is where the definition of "sa_family_t" comes from. We've been back and forth on how to fix this issue in the past, see: http://thread.gmane.org/gmane.linux.debian.devel.bugs.general/622621 http://thread.gmane.org/gmane.linux.network/143380 Ben Hutchings suggested we take a hint from how we handle the sockaddr_storage type. First we define a "__kernel_sa_family_t" to linux/socket.h that is always defined. Then if __KERNEL__ is defined, we also define "sa_family_t" as equal to "__kernel_sa_family_t". Then in places like linux/netlink.h we use __kernel_sa_family_t in user visible datastructures. Reported-by: NMichel Machado <michel@digirati.com.br> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Baluta 提交于
IP_PKTOPTIONS is broken for 32-bit applications running in COMPAT mode on 64-bit kernels. This happens because msghdr's msg_flags field is always set to zero. When running in COMPAT mode this should be set to MSG_CMSG_COMPAT instead. Signed-off-by: NTiberiu Szocs-Mihai <tszocs@ixiacom.com> Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Kamichoff 提交于
The LG-VL600 LTE USB modem supports IPv6, but uses and expects an IPv4 ethertype (0x800) for these packets instead of the standard 0x86dd. This patch peeks at the IP version in the L3 header and sets the ethertype appropriately for IPv6 packets. Signed-off-by: NMark Kamichoff <prox@prolixium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
fixes following error seen on x86_64 kernel: ioctl32(openl2tpd:7480): Unknown cmd fd(14) cmd(80487436){t:'t';sz:72} arg(ffa7e6c0) on socket:[105094] The argument (struct pppol2tp_ioc_stats) uses "aligned_u64" and thus doesn't need fixups. Cc: James Chapman <jchapman@katalix.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
compare_keys and ip_route_input_common rely on rt_oif for distinguishing of input and output routes with same keys values. But sometimes the input route has also same hash chain (keyed by iif != 0) with the output routes (keyed by orig_oif=0). Problem visible if running with small number of rhash_entries. Fix them to use rt_route_iif instead. By this way input route can not be returned to users that request output route. The patch fixes the ip_rt_bug errors that were reported in ip_local_out context, mostly for 255.255.255.255 destinations. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas de Pesloüan 提交于
Commit 655f8919 bonding: add min links parameter to 802.3ad and commit ebd8e497 bonding: add all_slaves_active parameter introduced new options to bonding, but didn't provide the documentation for those options. V2: add the default value for both options. V3: document the exact behavior of min_links default value. Signed-off-by: NNicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matvejchikov Ilya 提交于
When using nanosleep() in an userspace application we get a ratelimit warning: NOHZ: local_softirq_pending 08 According to 481a8199 the problem is caused by netif_rx() function. This patch replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. Signed-off-by: NMatvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
NF_STOLEN means skb was already freed Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The define is only used one place, and it's at the end of a line so the semi-colon doesn't affect anything. But let's clean it up anyway. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joakim Tjernlund 提交于
The driver supports Autoneg and at least MII. Tell the PHY that to avoid any confusion in the PHY code. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
- empty lines - tabs / spaces - ETHTOOL_GWOL _is_ defined - useless cast from void * Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NJon Nelson <jnelson@jamponi.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=14076. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NJon Nelson <jnelson@jamponi.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix build with DEBUG_PAGEALLOC enabled.
-
由 Rafael J. Wysocki 提交于
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The generic library code already exports the generic function, this was left-over from the ARM-specific version that just got removed. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Since commit 1eb19a12 ("lib/sha1: use the git implementation of SHA-1"), the ARM SHA1 routines no longer work. The reason? They depended on the larger 320-byte workspace, and now the sha1 workspace is just 16 words (64 bytes). So the assembly version would overwrite the stack randomly. The optimized asm version is also probably slower than the new improved C version, so there's no reason to keep it around. At least that was the case in git, where what appears to be the same assembly language version was removed two years ago because the optimized C BLK_SHA1 code was faster. Reported-and-tested-by: NJoachim Eastwood <manabian@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
task->cred is declared as __rcu, and access to other tasks' ->cred is, indeed, protected. Access to current->cred does not need rcu_dereference() at all, since only the task itself can change its ->cred. sparse, of course, has no way of knowing that... Add force-cast in current_cred(), make current_fsuid() et.al. use it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Al points out that the do_follow_link() helper function really is misnamed - it's about whether we should try to follow a symlink or not, not about actually doing the following. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2011 10 次提交
-
-
由 Ari Savolainen 提交于
After commit 3567866b: "RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached" posix_acl_permission is being called with an unsupported flag and the permission check fails. This patch fixes the issue. Signed-off-by: NAri Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Make ore its own module exofs: Rename raid engine from exofs/ios.c => ore exofs: ios: Move to a per inode components & device-table exofs: Move exofs specific osd operations out of ios.c exofs: Add offset/length to exofs_get_io_state exofs: Fix truncate for the raid-groups case exofs: Small cleanup of exofs_fill_super exofs: BUG: Avoid sbi realloc exofs: Remove pnfs-osd private definitions nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
-
由 Linus Torvalds 提交于
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Gcc tends to generate better code with small integers, including the DCACHE_xyz flag tests - so move the common ones to be first in the list. Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and DCACHE_AUTOFS_PENDING values, their users no longer exists in the source tree. And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the common case to be a nice straight-line fall-through. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Compute protocol sequence numbers and fragment IDs using MD5. crypto: Move md5_transform to lib/md5.c
-
由 Boaz Harrosh 提交于
Export everything from ore need exporting. Change Kbuild and Kconfig to build ore.ko as an independent module. Import ore from exofs Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
ORE stands for "Objects Raid Engine" This patch is a mechanical rename of everything that was in ios.c and its API declaration to an ore.c and an osd_ore.h header. The ore engine will later be used by the pnfs objects layout driver. * File ios.c => ore.c * Declaration of types and API are moved from exofs.h to a new osd_ore.h * All used types are prefixed by ore_ from their exofs_ name. * Shift includes from exofs.h to osd_ore.h so osd_ore.h is independent, include it from exofs.h. Other than a pure rename there are no other changes. Next patch will move the ore into it's own module and will export the API to be used by exofs and later the layout driver Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
Exofs raid engine was saving on memory space by having a single layout-info, single pid, and a single device-table, global to the filesystem. Then passing a credential and object_id info at the io_state level, private for each inode. It would also devise this contraption of rotating the device table view for each inode->ino to spread out the device usage. This is not compatible with the pnfs-objects standard, demanding that each inode can have it's own layout-info, device-table, and each object component it's own pid, oid and creds. So: Bring exofs raid engine to be usable for generic pnfs-objects use by: * Define an exofs_comp structure that holds obj_id and credential info. * Break up exofs_layout struct to an exofs_components structure that holds a possible array of exofs_comp and the array of devices + the size of the arrays. * Add a "comps" parameter to get_io_state() that specifies the ids creds and device array to use for each IO. This enables to keep the layout global, but the device-table view, creds and IDs at the inode level. It only adds two 64bit to each inode, since some of these members already existed in another form. * ios raid engine now access layout-info and comps-info through the passed pointers. Everything is pre-prepared by caller for generic access of these structures and arrays. At the exofs Level: * Super block holds an exofs_components struct that holds the device array, previously in layout. The devices there are in device-table order. The device-array is twice bigger and repeats the device-table twice so now each inode's device array can point to a random device and have a round-robin view of the table, making it compatible to previous exofs versions. * Each inode has an exofs_components struct that is initialized at load time, with it's own view of the device table IDs and creds. When doing IO this gets passed to the io_state together with the layout. While preforming this change. Bugs where found where credentials with the wrong IDs where used to access the different SB objects (super.c). As well as some dead code. It was never noticed because the target we use does not check the credentials. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
ios.c will be moving to an external library, for use by the objects-layout-driver. Remove from it some exofs specific functions. Also g_attr_logical_length is used both by inode.c and ios.c move definition to the later, to keep it independent Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
In future raid code we will need to know the IO offset/length and if it's a read or write to determine some of the array sizes we'll need. So add a new exofs_get_rw_state() API for use when writeing/reading. All other simple cases are left using the old way. The major change to this is that now we need to call exofs_get_io_state later at inode.c::read_exec and inode.c::write_exec when we actually know these things. So this patch is kept separate so I can test things apart from other changes. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-