提交 b955f6ca 编写于 作者: J Jeff Kirsher

amd: Move AMD (Lance) chipset drivers

Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/
and the necessary Kconfig and Makfile changes.

The au1000 (Alchemy) driver was also moved into the same directory
even though it is not a "Lance" driver.

CC: Peter Maydell <pmaydell@chiark.greenend.org.uk>
CC: Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
CC: Donald Becker <becker@scyld.com>
CC: Sam Creasey <sammy@users.qual.net>
CC: Miguel de Icaza <miguel@nuclecu.unam.mx>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CC: Don Fry <pcnet32@frontier.com>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: David Davies <davies@maniac.ultranet.com>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Pete Popov <ppopov@embeddedalley.com>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: "Roger C. Pao" <rpao@paonet.org>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 ca7a8e85
......@@ -746,7 +746,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
F: drivers/net/arm/am79c961a.*
F: drivers/net/ethernet/amd/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
M: Daniel Ribeiro <drwyrm@gmail.com>
......@@ -4941,7 +4941,7 @@ PCNET32 NETWORK DRIVER
M: Don Fry <pcnet32@frontier.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/pcnet32.c
F: drivers/net/ethernet/amd/pcnet32.c
PCRYPT PARALLEL CRYPTO ENGINE
M: Steffen Klassert <steffen.klassert@secunet.com>
......
......@@ -287,27 +287,6 @@ config BMAC
To compile this driver as a module, choose M here: the module
will be called bmac.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config HYDRA
tristate "Hydra support"
depends on ZORRO
......@@ -387,16 +366,6 @@ config MACMACE
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on MVME147
select CRC32
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
......@@ -415,27 +384,6 @@ config BVME6000_NET
in your kernel.
To compile this driver as a module, choose M here.
config ATARILANCE
tristate "Atari Lance support"
depends on ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on SUN3 || SUN3X
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
......@@ -445,14 +393,6 @@ config SUN3_82586
that this driver does not support 82586-based adapters on additional
VME boards.
config HPLANCE
bool "HP on-board LANCE support"
depends on DIO
select CRC32
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
......@@ -487,15 +427,6 @@ config XTENSA_XT2000_SONIC
help
This is the driver for the onboard card of the Xtensa XT2000 board.
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
help
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
......@@ -545,19 +476,6 @@ config SH_ETH
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on SBUS || PCI
......@@ -673,18 +591,6 @@ config ELMC_II
To compile this driver as a module, choose M here. The module
will be called 3c527.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
depends on ISA || MCA || EISA || MAC
......@@ -1020,17 +926,6 @@ config NI52
To compile this driver as a module, choose M here. The module
will be called ni52.
config NI65
tristate "NI6510 support"
depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni65.
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET && HAS_IOMEM
......@@ -1056,19 +951,6 @@ config AT1700
To compile this driver as a module, choose M here. The module
will be called at1700.
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on ISA || EISA || MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
......@@ -1287,32 +1169,6 @@ config NET_PCI
will be asked for your specific card in the following questions. If
you are unsure, say Y.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
depends on NET_PCI && PCI
select CRC32
select MII
help
If you have an AMD 8111-based PCI lance ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
......@@ -1834,15 +1690,6 @@ config SGISEEQ
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
help
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD Lance chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
......
......@@ -56,7 +56,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
obj-$(CONFIG_SUNQE) += sunqe.o
obj-$(CONFIG_SUNBMAC) += sunbmac.o
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
......@@ -67,7 +66,6 @@ obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
......@@ -177,9 +175,7 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DE600) += de600.o
obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
......@@ -194,12 +190,10 @@ obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_NI65) += ni65.o
obj-$(CONFIG_ELPLUS) += 3c505.o
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APRICOT) += 82596.o
......@@ -214,19 +208,12 @@ obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_MACMACE) += macmace.o
......@@ -236,7 +223,6 @@ obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
......
......@@ -2,13 +2,6 @@
# Acorn Network device configuration
# These are for Acorn's Expansion card network interfaces
#
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
help
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ARM_ETHER1
tristate "Acorn Ether1 support"
......
......@@ -3,7 +3,6 @@
# Makefile for the ARM network device drivers
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
......
......@@ -12,5 +12,6 @@ menuconfig ETHERNET
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
endif # ETHERNET
......@@ -3,3 +3,4 @@
#
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
#
# AMD network device configuration
#
config NET_VENDOR_AMD
bool "AMD devices"
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
(ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just case the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_AMD
config A2065
tristate "A2065 support"
depends on ZORRO
select CRC32
---help---
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the module
will be called a2065.
config AMD8111_ETH
tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI
select CRC32
select MII
---help---
If you have an AMD 8111-based PCI LANCE ethernet card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called amd8111e.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config PCNET32
tristate "AMD PCnet32 PCI support"
depends on PCI
select CRC32
select MII
---help---
If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called pcnet32.
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
---help---
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config ARM_AM79C961A
bool "ARM EBSA110 AM79C961A support"
depends on ARM && ARCH_EBSA110
select CRC32
---help---
If you wish to compile a kernel for the EBSA-110, then you should
always answer Y to this.
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
---help---
Say Y to include support for several Atari Ethernet adapters based
on the AMD LANCE chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config DECLANCE
tristate "DEC LANCE ethernet controller support"
depends on MACH_DECSTATION
select CRC32
---help---
This driver is for the series of Ethernet controllers produced by
DEC (now Compaq) based on the AMD LANCE chipset, including the
DEPCA series. (This chipset is better known via the NE2100 cards.)
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
depends on (ISA || EISA || MCA)
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
To compile this driver as a module, choose M here. The module
will be called depca.
config HPLANCE
bool "HP on-board LANCE support"
depends on DIO
select CRC32
---help---
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config MIPS_AU1X00_ENET
tristate "MIPS AU1000 Ethernet support"
depends on MIPS_ALCHEMY
select PHYLIB
select CRC32
---help---
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
config MVME147_NET
tristate "MVME147 (LANCE) Ethernet support"
depends on MVME147
select CRC32
---help---
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
depends on PCMCIA
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called ni65.
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on (SUN3 || SUN3X)
---help---
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUNLANCE
tristate "Sun LANCE support"
depends on SBUS
select CRC32
---help---
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD LANCE chipset, which is better known
via the NE2100 cards.
To compile this driver as a module, choose M here: the module
will be called sunlance.
endif # NET_VENDOR_AMD
#
# Makefile for the AMD network device drivers.
#
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
obj-$(CONFIG_NI65) += ni65.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
......@@ -41,15 +41,6 @@ config PCMCIA_PCNET
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
select CRC32
......
......@@ -4,7 +4,6 @@
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册