Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make cls_u32 classifier safe to run without holding lock. This patch
converts statistics that are kept in read section u32_classify into
per cpu counters.

This patch was tested with a tight u32 filter add/delete loop while
generating traffic with pktgen. By running pktgen on vlan devices
created on top of a physical device we can hit the qdisc layer
correctly. For ingress qdisc's a loopback cable was used.

for i in {1..100}; do
        q=`echo $i%8|bc`;
        echo -n "u32 tos: iteration $i on queue $q";
        tc filter add dev p3p2 parent $p prio $i u32 match ip tos 0x10 0xff \
                  action skbedit queue_mapping $q;
        sleep 1;
        tc filter del dev p3p2 prio $i;

        echo -n "u32 tos hash table: iteration $i on queue $q";
        tc filter add dev p3p2 parent $p protocol ip prio $i handle 628: u32 divisor 1
        tc filter add dev p3p2 parent $p protocol ip prio $i u32 \
                match ip protocol 17 0xff link 628: offset at 0 mask 0xf00 shift 6 plus 0
        tc filter add dev p3p2 parent $p protocol ip prio $i u32 \
                ht 628:0 match ip tos 0x10 0xff action skbedit queue_mapping $q
        sleep 2;
        tc filter del dev p3p2 prio $i
        sleep 1;
done
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This uses per cpu counters in cls_u32 in preparation
to convert over to rcu.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make cls_tcindex RCU safe.

This patch addds a new RCU routine rcu_dereference_bh_rtnl() to check
caller either holds the rcu read lock or RTNL. This is needed to
handle the case where tcindex_lookup() is being called in both cases.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RCUify the route classifier. For now however spinlock's are used to
protect fastmap cache.

The issue here is the fastmap may be read by one CPU while the
cache is being updated by another. An array of pointers could be
one possible solution.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RCU'ify fw classifier.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make cgroup classifier safe for RCU.

Also drops the calls in the classify routine that were doing a
rcu_read_lock()/rcu_read_unlock(). If the rcu_read_lock() isn't held
entering this routine we have issues with deleting the classifier
chain so remove the unnecessary rcu_read_lock()/rcu_read_unlock()
pair noting all paths AFAIK hold rcu_read_lock.

If there is a case where classify is called without the rcu read lock
then an rcu splat will occur and we can correct it.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable basic classifier for RCU.

Dereferencing tp->root may look a bit strange here but it is needed
by my accounting because it is allocated at init time and needs to
be kfree'd at destroy time. However because it may be referenced in
the classify() path we must wait an RCU grace period before free'ing
it. We use kfree_rcu() and rcu_ APIs to enforce this. This pattern
is used in all the classifiers.

Also the hgenerator can be incremented without concern because it
is always incremented under RTNL.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rcu'ify tcf_proto this allows calling tc_classify() without holding
any locks. Updaters are protected by RTNL.

This patch prepares the core net_sched infrastracture for running
the classifier/action chains without holding the qdisc lock however
it does nothing to ensure cls_xxx and act_xxx types also work without
locking. Additional patches are required to address the fall out.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add __rcu notation to qdisc handling by doing this we can make
smatch output more legible. And anyways some of the cases should
be using rcu_dereference() see qdisc_all_tx_empty(),
qdisc_tx_chainging(), and so on.

Also *wake_queue() API is commonly called from driver timer routines
without rcu lock or rtnl lock. So I added rcu_read_lock() blocks
around netif_wake_subqueue and netif_tx_wake_queue.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending out a burst of packets across multiple descriptors,
it is sufficient to send one LDC "start" trigger for
the first descriptor, so do not send an LDC "start" for every
pass through vnet_start_xmit. Similarly, it is sufficient to send
one "DRING_STOPPED" trigger for the last dring (and if that
fails, hold off and send the trigger later).

Optimizations to the number of LDC messages helps avoid
filling up the LDC channel with superfluous LDC messages
that risk triggering flow-control on the channel,
and also boosts performance.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NRaghuram Kothakota <raghuram.kothakota@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

calling ether_setup is redundant since alloc_etherdev calls
it.
Signed-off-by: NSubbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It will use pr_info_one() to print the version info of the
driver in probe function only once. No need to use the static
variable here.
Signed-off-by: NVarka Bhadram <varkab@cdac.in>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 2abb7cdc ("udp: Add support for doing checksum unnecessary
conversion") caused napi_gro_cb structs with the "flush" field zero to
take the "udp_gro_receive" path rather than the "set flush to 1" path
that they would previously take.  As a result I saw booting from an NFS
root hang shortly after starting userspace, with "server not
responding" messages.

This change to the handling of "flush == 0" packets appears to be
incidental to the goal of adding new code in the case where
skb_gro_checksum_validate_zero_check() returns zero.  Based on that and
the fact that it breaks things, I'm assuming that it is unintentional.

Fixes: 2abb7cdc ("udp: Add support for doing checksum unnecessary conversion")
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Address reference counting issues with sock_queue_err_skb

After looking over the code for skb_clone_sk after some comments made by
Eric Dumazet I have come to the conclusion that skb_clone_sk is taking the
correct approach in how to handle the sk_refcnt when creating a buffer that
is eventually meant to be returned to the socket via the sock_queue_err_skb
function.

However upon review of other callers I found what I believe to be a
possible reference count issue in the path for handling "wifi ack" packets.
To address this I have applied the same logic that is currently in place so
that the sk_refcnt will be forced to stay at least 1, or we will not
provide an skb to return in the sk_error_queue.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a possible issue with the use, or lack thereof of sk_refcnt and
sk_wmem_alloc in the wifi ack status functionality.

Specifically if a socket were to request acknowledgements, and the socket
were to have sk_refcnt drop to 0 resulting in it waiting on sk_wmem_alloc
to reach 0 it would be possible to have sock_queue_err_skb orphan the last
buffer, resulting in __sk_free being called on the socket.  After this the
buffer is enqueued on sk_error_queue, however the queue has already been
flushed resulting in at least a memory leak, if not a data corruption.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change adds some documentation to the call skb_clone_sk.  This is
meant to help clarify the purpose of the function for other developers.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit c801e3cc ("ipv4: Clarify in docs that accept_local requires rp_filter.").
It is not needed anymore since commit 1dced6a8 ("ipv4: Restore accept_local behaviour in fib_validate_source()").
Suggested-by: NJulian Anastasov <ja@ssi.bg>
Cc: Gregory Detal <gregory.detal@uclouvain.be>
Cc: Christoph Paasch <christoph.paasch@uclouvain.be>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NSébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since BPF JIT depends on the availability of module_alloc() and
module_free() helpers (HAVE_BPF_JIT and MODULES), we better build
that code only in case we have BPF_JIT in our config enabled, just
like with other JIT code. Fixes builds for arm/marzen_defconfig
and sh/rsk7269_defconfig.

====================
kernel/built-in.o: In function `bpf_jit_binary_alloc':
/home/cwang/linux/kernel/bpf/core.c:144: undefined reference to `module_alloc'
kernel/built-in.o: In function `bpf_jit_binary_free':
/home/cwang/linux/kernel/bpf/core.c:164: undefined reference to `module_free'
make: *** [vmlinux] Error 1
====================
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Fixes: 738cbe72 ("net: bpf: consolidate JIT binary allocator")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: Allow FW size upto 1MB, support for S25FL032P flash and misc. fixes

This patch series adds support to allow FW size upto 1MB, support for S25FL032P
flash. Fix t4_flash_erase_sectors to throw an error, when erase sector aren't in
the flash and also warning message when adapters have flashes less than 2Mb.
Adds device id of new adapter and removes device id of debug adapter.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 driver and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cxgb4: Fix t4_flash_erase_sectors() to throw an error when requested to erase sectors which aren't in the FLASH

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for Spansion S25FL032P flash
Based on original work by Dimitris Michailidis
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the following sparse warnings:
sparse: symbol 'tipc_update_nametbl' was not declared. Should it be static?
Also, the function is changed to return bool upon success, rather than a
potentially freed pointer.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free resources before being disconnected from phy and calling core driver is
wrong and should not happen. It avoids a delay of 4-5s caused by the timeout of
phy_disconnect().
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
nf-next pull request

The following patchset contains Netfilter/IPVS updates for your
net-next tree. Regarding nf_tables, most updates focus on consolidating
the NAT infrastructure and adding support for masquerading. More
specifically, they are:

1) use __u8 instead of u_int8_t in arptables header, from
   Mike Frysinger.

2) Add support to match by skb->pkttype to the meta expression, from
   Ana Rey.

3) Add support to match by cpu to the meta expression, also from
   Ana Rey.

4) A smatch warning about IPSET_ATTR_MARKMASK validation, patch from
   Vytas Dauksa.

5) Fix netnet and netportnet hash types the range support for IPv4,
   from Sergey Popovich.

6) Fix missing-field-initializer warnings resolved, from Mark Rustad.

7) Dan Carperter reported possible integer overflows in ipset, from
   Jozsef Kadlecsick.

8) Filter out accounting objects in nfacct by type, so you can
   selectively reset quotas, from Alexey Perevalov.

9) Move specific NAT IPv4 functions to the core so x_tables and
   nf_tables can share the same NAT IPv4 engine.

10) Use the new NAT IPv4 functions from nft_chain_nat_ipv4.

11) Move specific NAT IPv6 functions to the core so x_tables and
    nf_tables can share the same NAT IPv4 engine.

12) Use the new NAT IPv6 functions from nft_chain_nat_ipv6.

13) Refactor code to add nft_delrule(), which can be reused in the
    enhancement of the NFT_MSG_DELTABLE to remove a table and its
    content, from Arturo Borrero.

14) Add a helper function to unregister chain hooks, from
    Arturo Borrero.

15) A cleanup to rename to nft_delrule_by_chain for consistency with
    the new nft_*() functions, also from Arturo.

16) Add support to match devgroup to the meta expression, from Ana Rey.

17) Reduce stack usage for IPVS socket option, from Julian Anastasov.

18) Remove unnecessary textsearch state initialization in xt_string,
    from Bojan Prtvar.

19) Add several helper functions to nf_tables, more work to prepare
    the enhancement of NFT_MSG_DELTABLE, again from Arturo Borrero.

20) Enhance NFT_MSG_DELTABLE to delete a table and its content, from
    Arturo Borrero.

21) Support NAT flags in the nat expression to indicate the flavour,
    eg. random fully, from Arturo.

22) Add missing audit code to ebtables when replacing tables, from
    Nicolas Dichtel.

23) Generalize the IPv4 masquerading code to allow its re-use from
    nf_tables, from Arturo.

24) Generalize the IPv6 masquerading code, also from Arturo.

25) Add the new masq expression to support IPv4/IPv6 masquerading
    from nf_tables, also from Arturo.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Coalesce formats.
Realign arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Realign arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
net: enable GRO for IPIP and SIT

This patch sets populates the IPIP and SIT offload structures with
gro_receive and gro_complete functions. This enables use of GRO
for these. Also, fixed a problem in IPv6 where we were not properly
initializing flush_id.

Peformance results are below. Note that these tests were done on bnx2x
which doesn't provide RX checksum offload of IPIP or SIT (i.e. does
not give CHEKCSUM_COMPLETE). Also, we don't get 4-tuple hash for RSS
only 2-tuple in this case so all the packets between two hosts are
winding up on the same queue. Net result is the interrupting CPU is
the bottleneck in GRO (checksumming every packet there).

Testing:

netperf TCP_STREAM between two hosts using bnx2x.

* Before fix

IPIP
  1 connection
    6.53% CPU utilization
    6544.71 Mbps
  20 connections
    13.79% CPU utilization
    9284.54 Mbps

SIT
  1 connection
    6.68% CPU utilization
    5653.36 Mbps
  20 connections
    18.88% CPU utilization
    9154.61 Mbps

* After fix

IPIP
  1 connection
    5.73% CPU utilization
    9279.53 Mbps
  20 connections
    7.14% CPU utilization
    7279.35 Mbps

SIT
  1 connection
    2.95% CPU utilization
    9143.36 Mbps
  20 connections
    7.09% CPU utilization
    6255.3 Mbps
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ipv6_gro_receive and ipv6_gro_complete to sit_offload to
support GRO.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add inet_gro_receive and inet_gro_complete to ipip_offload to
support GRO.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In TCP gro we check flush_id which is derived from the IP identifier.
In IPv4 gro path the flush_id is set with the expectation that every
matched packet increments IP identifier. In IPv6, the flush_id is
never set and thus is uinitialized. What's worse is that in IPv6
over IPv4 encapsulation, the IP identifier is taken from the outer
header which is currently not incremented on every packet for Linux
stack, so GRO in this case never matches packets (identifier is
not increasing).

This patch clears flush_id for every time for a matched packet in
IPv6 gro_receive. We need to do this each time to overwrite the
setting that would be done in IPv4 gro_receive per the outer
header in IPv6 over Ipv4 encapsulation.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the much more common pr_warn instead of pr_warning.

Other miscellanea:

o Typo fixes submiting/submitting
o Coalesce formats
o Realign arguments
o Add missing terminating '\n' to formats
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv4/udp_offload.c:339:5: warning: symbol 'udp4_gro_complete' was
not declared. Should it be static?
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Fixes: 57c67ff4 ("udp: additional GRO support")
Acked-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>