提交 fe3881cf 编写于 作者: J Joe Perches 提交者: David S. Miller

drivers/net: Convert remaining uses of pr_warning to pr_warn

Use the much more common pr_warn instead of pr_warning.

Other miscellanea:

o Typo fixes submiting/submitting
o Coalesce formats
o Realign arguments
o Add missing terminating '\n' to formats
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 46cfd725
......@@ -695,9 +695,9 @@ el3_tx_timeout (struct net_device *dev)
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",
dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
inw(ioaddr + TX_FREE));
pr_warn("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d\n",
dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
inw(ioaddr + TX_FREE));
dev->stats.tx_errors++;
dev->trans_start = jiffies; /* prevent tx timeout */
/* Issue TX_RESET and TX_START commands. */
......
......@@ -515,7 +515,7 @@ static struct net_device *corkscrew_scan(int unit)
if (pnp_device_attach(idev) < 0)
continue;
if (pnp_activate_dev(idev) < 0) {
pr_warning("pnp activate failed (out of resources?)\n");
pr_warn("pnp activate failed (out of resources?)\n");
pnp_device_detach(idev);
continue;
}
......@@ -659,7 +659,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
pr_cont(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n");
{
static const char * const ram_split[] = {
......@@ -967,13 +967,13 @@ static void corkscrew_timeout(struct net_device *dev)
struct corkscrew_private *vp = netdev_priv(dev);
int ioaddr = dev->base_addr;
pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
dev->name, inb(ioaddr + TxStatus),
inw(ioaddr + EL3_STATUS));
pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n",
dev->name, inb(ioaddr + TxStatus),
inw(ioaddr + EL3_STATUS));
/* Slight code bloat to be user friendly. */
if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
pr_warning("%s: Transmitter encountered 16 collisions --"
" network cable problem?\n", dev->name);
pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n",
dev->name);
#ifndef final_version
pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
......@@ -1382,13 +1382,10 @@ static int boomerang_rx(struct net_device *dev)
temp = skb_put(skb, pkt_len);
/* Remove this checking code for final release. */
if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
pr_warning("%s: Warning -- the skbuff addresses do not match"
" in boomerang_rx: %p vs. %p / %p.\n",
dev->name,
isa_bus_to_virt(vp->
rx_ring[entry].
addr), skb->head,
temp);
pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n",
dev->name,
isa_bus_to_virt(vp->rx_ring[entry].addr),
skb->head, temp);
rx_nocopy++;
}
skb->protocol = eth_type_trans(skb, dev);
......
......@@ -1310,8 +1310,8 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
pr_cont(", IRQ %d\n", dev->irq);
/* Tell them about an invalid IRQ. */
if (dev->irq <= 0 || dev->irq >= nr_irqs)
pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n",
dev->irq);
step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1;
if (print_info) {
......@@ -1425,7 +1425,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
}
mii_preamble_required--;
if (phy_idx == 0) {
pr_warning(" ***WARNING*** No MII transceivers found!\n");
pr_warn(" ***WARNING*** No MII transceivers found!\n");
vp->phys[0] = 24;
} else {
vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
......@@ -1566,8 +1566,7 @@ vortex_up(struct net_device *dev)
pci_restore_state(VORTEX_PCI(vp));
err = pci_enable_device(VORTEX_PCI(vp));
if (err) {
pr_warning("%s: Could not enable device\n",
dev->name);
pr_warn("%s: Could not enable device\n", dev->name);
goto err_out;
}
}
......@@ -2007,8 +2006,8 @@ vortex_error(struct net_device *dev, int status)
/* This occurs when we have the wrong media type! */
if (DoneDidThat == 0 &&
ioread16(ioaddr + EL3_STATUS) & StatsFull) {
pr_warning("%s: Updating statistics failed, disabling "
"stats as an interrupt source.\n", dev->name);
pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n",
dev->name);
iowrite16(SetIntrEnb |
(window_read16(vp, 5, 10) & ~StatsFull),
ioaddr + EL3_CMD);
......@@ -2147,8 +2146,8 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
if (vortex_debug > 0)
pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
dev->name);
pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n",
dev->name);
netif_stop_queue(dev);
return NETDEV_TX_BUSY;
}
......@@ -2311,7 +2310,7 @@ vortex_interrupt(int irq, void *dev_id)
}
if (--work_done < 0) {
pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
pr_warn("%s: Too much work in interrupt, status %4.4x\n",
dev->name, status);
/* Disable all pending interrupts. */
do {
......@@ -2444,7 +2443,7 @@ boomerang_interrupt(int irq, void *dev_id)
vortex_error(dev, status);
if (--work_done < 0) {
pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
pr_warn("%s: Too much work in interrupt, status %4.4x\n",
dev->name, status);
/* Disable all pending interrupts. */
do {
......@@ -2620,7 +2619,8 @@ boomerang_rx(struct net_device *dev)
if (skb == NULL) {
static unsigned long last_jif;
if (time_after(jiffies, last_jif + 10 * HZ)) {
pr_warning("%s: memory shortage\n", dev->name);
pr_warn("%s: memory shortage\n",
dev->name);
last_jif = jiffies;
}
if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
......@@ -2719,7 +2719,8 @@ vortex_close(struct net_device *dev)
if (vp->rx_csumhits &&
(vp->drv_flags & HAS_HWCKSM) == 0 &&
(vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
pr_warn("%s supports hardware checksums, and we're not using them!\n",
dev->name);
}
#endif
......
......@@ -427,7 +427,7 @@ static void b44_wap54g10_workaround(struct b44 *bp)
}
return;
error:
pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
......
......@@ -847,8 +847,7 @@ int vnic_dev_intr_coal_timer_info(struct vnic_dev *vdev)
*/
if ((err == ERR_ECMDUNKNOWN) ||
(!err && !(vdev->args[0] && vdev->args[1] && vdev->args[2]))) {
pr_warning("Using default conversion factor for "
"interrupt coalesce timer\n");
pr_warn("Using default conversion factor for interrupt coalesce timer\n");
vnic_dev_intr_coal_timer_info_default(vdev);
return 0;
}
......
......@@ -1107,7 +1107,7 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
u16 v = 0;
if (__xm_phy_read(hw, port, reg, &v))
pr_warning("%s: phy read timed out\n", hw->dev[port]->name);
pr_warn("%s: phy read timed out\n", hw->dev[port]->name);
return v;
}
......@@ -1903,7 +1903,7 @@ static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
return 0;
}
pr_warning("%s: phy write timeout\n", hw->dev[port]->name);
pr_warn("%s: phy write timeout\n", hw->dev[port]->name);
return -EIO;
}
......@@ -1931,7 +1931,7 @@ static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
u16 v = 0;
if (__gm_phy_read(hw, port, reg, &v))
pr_warning("%s: phy read timeout\n", hw->dev[port]->name);
pr_warn("%s: phy read timeout\n", hw->dev[port]->name);
return v;
}
......
......@@ -2814,7 +2814,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
default:
if (net_ratelimit())
pr_warning("unknown status opcode 0x%x\n", opcode);
pr_warn("unknown status opcode 0x%x\n", opcode);
}
} while (hw->st_idx != idx);
......
......@@ -693,11 +693,11 @@ static void yellowfin_tx_timeout(struct net_device *dev)
/* Note: these should be KERN_DEBUG. */
if (yellowfin_debug) {
int i;
pr_warning(" Rx ring %p: ", yp->rx_ring);
pr_warn(" Rx ring %p: ", yp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
pr_cont(" %08x", yp->rx_ring[i].result_status);
pr_cont("\n");
pr_warning(" Tx ring %p: ", yp->tx_ring);
pr_warn(" Tx ring %p: ", yp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
pr_cont(" %04x /%08x",
yp->tx_status[i].tx_errs,
......
......@@ -1477,9 +1477,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
u32 val;
if (pdev->revision >= NX_P3_A0 && pdev->revision <= NX_P3_B1) {
pr_warning("%s: chip revisions between 0x%x-0x%x "
"will not be enabled.\n",
module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
pr_warn("%s: chip revisions between 0x%x-0x%x will not be enabled\n",
module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
return -ENODEV;
}
......
......@@ -282,7 +282,7 @@ int stmmac_mdio_register(struct net_device *ndev)
}
if (!found) {
pr_warning("%s: No PHY found\n", ndev->name);
pr_warn("%s: No PHY found\n", ndev->name);
mdiobus_unregister(new_bus);
mdiobus_free(new_bus);
return -ENODEV;
......
......@@ -4962,7 +4962,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
if (pci_try_set_mwi(pdev))
pr_warning("Could not enable MWI for %s\n", pci_name(pdev));
pr_warn("Could not enable MWI for %s\n", pci_name(pdev));
cas_program_bridge(pdev);
......
......@@ -8717,8 +8717,8 @@ static void niu_divide_channels(struct niu_parent *parent,
parent->txchan_per_port[i] = 1;
}
if (tot_rx < NIU_NUM_RXCHAN || tot_tx < NIU_NUM_TXCHAN) {
pr_warning("niu%d: Driver bug, wasted channels, RX[%d] TX[%d]\n",
parent->index, tot_rx, tot_tx);
pr_warn("niu%d: Driver bug, wasted channels, RX[%d] TX[%d]\n",
parent->index, tot_rx, tot_tx);
}
}
......
......@@ -534,7 +534,7 @@ static void vnet_event(void *arg, int event)
}
if (unlikely(event != LDC_EVENT_DATA_READY)) {
pr_warning("Unexpected LDC event %d\n", event);
pr_warn("Unexpected LDC event %d\n", event);
spin_unlock_irqrestore(&vio->lock, flags);
return;
}
......
......@@ -956,7 +956,7 @@ static int tile_net_open_aux(struct net_device *dev)
*/
if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) {
pr_warning("Failed to start LIPP/LEPP.\n");
pr_warn("Failed to start LIPP/LEPP\n");
return -EIO;
}
......@@ -2399,8 +2399,7 @@ static int __init network_cpus_setup(char *str)
{
int rc = cpulist_parse_crop(str, &network_cpus_map);
if (rc != 0) {
pr_warning("network_cpus=%s: malformed cpu list\n",
str);
pr_warn("network_cpus=%s: malformed cpu list\n", str);
} else {
/* Remove dedicated cpus. */
......@@ -2409,8 +2408,7 @@ static int __init network_cpus_setup(char *str)
if (cpumask_empty(&network_cpus_map)) {
pr_warning("Ignoring network_cpus='%s'.\n",
str);
pr_warn("Ignoring network_cpus='%s'\n", str);
} else {
char buf[1024];
cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
......
......@@ -357,7 +357,7 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
card->usb_boot_state = USB8XXX_FW_READY;
break;
default:
pr_warning("unknown id_product %#x\n", id_product);
pr_warn("unknown id_product %#x\n", id_product);
card->usb_boot_state = USB8XXX_FW_DNLD;
break;
}
......
......@@ -534,7 +534,7 @@ static void ezusb_request_out_callback(struct urb *urb)
if (ctx->killed) {
spin_unlock_irqrestore(&upriv->req_lock, flags);
pr_warning("interrupt called with dead ctx");
pr_warn("interrupt called with dead ctx\n");
goto out;
}
......@@ -671,8 +671,8 @@ static void ezusb_request_in_callback(struct ezusb_priv *upriv,
default:
spin_unlock_irqrestore(&upriv->req_lock, flags);
pr_warning("Matched IN URB, unexpected context state(0x%x)",
state);
pr_warn("Matched IN URB, unexpected context state(0x%x)\n",
state);
/* Throw this CTX away and try submitting another */
del_timer(&ctx->timer);
ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
......@@ -1394,12 +1394,12 @@ static void ezusb_bulk_in_callback(struct urb *urb)
/* When a device gets unplugged we get this every time
* we resubmit, flooding the logs. Since we don't use
* USB timeouts, it shouldn't happen any other time*/
pr_warning("%s: urb timed out, not resubmiting", __func__);
pr_warn("%s: urb timed out, not resubmitting\n", __func__);
return;
}
if (urb->status == -ECONNABORTED) {
pr_warning("%s: connection abort, resubmiting urb",
__func__);
pr_warn("%s: connection abort, resubmitting urb\n",
__func__);
goto resubmit;
}
if ((urb->status == -EILSEQ)
......@@ -1608,7 +1608,7 @@ static int ezusb_probe(struct usb_interface *interface,
if (usb_endpoint_is_bulk_in(ep)) {
/* we found a bulk in endpoint */
if (upriv->read_urb != NULL) {
pr_warning("Found a second bulk in ep, ignored");
pr_warn("Found a second bulk in ep, ignored\n");
continue;
}
......@@ -1618,10 +1618,10 @@ static int ezusb_probe(struct usb_interface *interface,
goto error;
}
if (le16_to_cpu(ep->wMaxPacketSize) != 64)
pr_warning("bulk in: wMaxPacketSize!= 64");
pr_warn("bulk in: wMaxPacketSize!= 64\n");
if (ep->bEndpointAddress != (2 | USB_DIR_IN))
pr_warning("bulk in: bEndpointAddress: %d",
ep->bEndpointAddress);
pr_warn("bulk in: bEndpointAddress: %d\n",
ep->bEndpointAddress);
upriv->read_pipe = usb_rcvbulkpipe(udev,
ep->
bEndpointAddress);
......@@ -1636,15 +1636,15 @@ static int ezusb_probe(struct usb_interface *interface,
if (usb_endpoint_is_bulk_out(ep)) {
/* we found a bulk out endpoint */
if (upriv->bap_buf != NULL) {
pr_warning("Found a second bulk out ep, ignored");
pr_warn("Found a second bulk out ep, ignored\n");
continue;
}
if (le16_to_cpu(ep->wMaxPacketSize) != 64)
pr_warning("bulk out: wMaxPacketSize != 64");
pr_warn("bulk out: wMaxPacketSize != 64\n");
if (ep->bEndpointAddress != 2)
pr_warning("bulk out: bEndpointAddress: %d",
ep->bEndpointAddress);
pr_warn("bulk out: bEndpointAddress: %d\n",
ep->bEndpointAddress);
upriv->write_pipe = usb_sndbulkpipe(udev,
ep->
bEndpointAddress);
......
......@@ -65,7 +65,7 @@ extern u32 wl12xx_debug_level;
pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
#define wl1271_warning(fmt, arg...) \
pr_warning(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
pr_warn(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
#define wl1271_notice(fmt, arg...) \
pr_info(DRIVER_PREFIX fmt "\n", ##arg)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册