- 20 7月, 2018 1 次提交
-
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Fixes for 4.18. The ACP patch is a bit bigger than I would like at this point, but it should have gone in long ago, it just fell through the cracks. The others are pretty small and straight-forward. - ACP fix for boards with 2 I2S instances - DP fix for CZ, vega - Fix for a hybrid graphics laptop - Fix a resume regression Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180718162603.2747-1-alexander.deucher@amd.com
-
- 18 7月, 2018 4 次提交
-
-
由 Vijendar Mukunda 提交于
Creating two I2S instances for Stoney/cz platforms. v2: squash in: "drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init" From Daniel Kurtz <djkurtz@chromium.org>. Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Needs ATPX rather than _PR3. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Hersen Wu 提交于
[why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by: NHersen Wu <hersenxs.wu@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Leo Liu 提交于
Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3)) Signed-off-by: NLeo Liu <leo.liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 7月, 2018 6 次提交
-
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2018-07-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes I already pulled the first fix, pull the GVT fixes. - GVT fix for KBL vGPU hang to update virtual register from LRI. Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713070922.GA19840@intel.com
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
Two armada fixes. Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713075427.GA16160@rmk-PC.armlinux.org.uk
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
Fixes for v4.18-rc5: - Single fix for a build error when the driver is builtin, but the backend is a loadable module. Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/9c596cf5-3f24-070e-74f2-c59bfbaf68fa@linux.intel.com
-
git://anongit.freedesktop.org/tegra/linux由 Dave Airlie 提交于
drm/tegra: Fixes for v4.18-rc5 This contains a couple of one- or two-line fixes for various minor issues in the Tegra driver. Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712070142.15571-1-thierry.reding@gmail.com
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A few display and GPUVM fixes for 4.18. A few more fixes for 4.18. Two display fixes and a fix to avoid a segfault if the GPU does not power up properly on resume. These are on top of my pull from earlier this week. Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712043820.2877-1-alexander.deucher@amd.com
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2018-07-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix hotplug irq ack on i965/g4x (Ville) Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710213249.GA16479@intel.com
-
- 14 7月, 2018 1 次提交
-
-
由 Alex Deucher 提交于
Rather than using the index variable stored in vram. If the device fails to come back online after a resume cycle, reads from vram will return all 1s which will cause a segfault. Based on a patch from Thomas Martitz <kugel@rockbox.org>. This avoids the segfault, but we still need to sort out why the GPU does not come back online after a resume. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 12 7月, 2018 3 次提交
-
-
由 David Francis 提交于
[Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: NDavid Francis <David.Francis@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
The driver is expecting clock frequency in kHz, while SMU returns the values in 10kHz, which causes the bandwidth validation to fail 4.18 has the faulty clock assignment in pp_to_dc_clock_levels_with_latency only, which is only used by Vega. Make sure we multiply these values by 10 here, as we do for other ASICs as powerplay assigned them wrong. 4.19 has the proper fix in powerplay. v2: Add Fixes tag v3: Fixes -> Bugzilla, with simplified link Bugzilla: https://bugs.freedesktop.org/107082Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Acked-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
https://github.com/intel/gvt-linux由 Rodrigo Vivi 提交于
gvt-fixes-2018-07-11 - Fix KBL virtual register update from LRI for GPU hang (Henry) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711024056.GV1267@zhen-hp.sh.intel.com
-
- 11 7月, 2018 4 次提交
-
-
由 Andrey Grodzovsky 提交于
Problem: When PD/PT update made by CPU root PD was not yet mapped causing page fault. Fix: Verify root PD is mapped into CPU address space. v2: Make sure that we add the root PD to the relocated list since then it's get mapped into CPU address space bt default in amdgpu_vm_update_directories. v3: Drop change to not move kernel type BOs to evicted list. v4: Remove redundant bo move to relocated list. Link: https://bugs.freedesktop.org/show_bug.cgi?id=107065Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Otherwise we try to program hardware with the wrong watermark functions when multiple DCE generations are installed in one system. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Michel Dänzer 提交于
Without this, there could not be enough slots, which could trigger the BUG_ON in reservation_object_add_shared_fence. v2: * Jump to the error label instead of returning directly (Jerry Zhang) v3: * Reserve slots for command submission after VM updates (Christian König) Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106418 Reported-by: mikhail.v.gavrilov@gmail.com Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This reverts commit 018d82e5. This breaks DDC in certain cases. Revert for 4.18 and previous kernels. For 4.19, this is fixed with the following more extensive patches: drm/amd/display: Serialize is_dp_sink_present drm/amd/display: Break out function to simply read aux reply drm/amd/display: Return aux replies directly to DRM drm/amd/display: Right shift AUX reply value sooner than later drm/amd/display: Read AUX channel even if only status byte is returned Link: https://lists.freedesktop.org/archives/amd-gfx/2018-July/023788.htmlAcked-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 10 7月, 2018 5 次提交
-
-
由 Gustavo A. R. Silva 提交于
Cast *tmp* and *nb_base* to u64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such variables are used in contexts that expect expressions of type u64 (64 bits, unsigned) and the following expressions are currently being evaluated using 32-bit arithmetic: tmp << 25 nb_base << 25 Addresses-Coverity-ID: 200586 ("Unintentional integer overflow") Addresses-Coverity-ID: 200587 ("Unintentional integer overflow") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Souptick Joarder 提交于
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f4220 ("mm: change return type to vm_fault_t") was added in 4.17-rc1 to introduce the new typedef vm_fault_t. Currently we are making change to all drivers to return vm_fault_t for page fault handlers. As part of that char/agp driver is also getting changed to return vm_fault_t type from fault handler. Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
Mail to dri-devel went out, linux-next was updated, but we forgot this one here. Cc: David Airlie <airlied@linux.ie> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch
-
https://git.pengutronix.de/git/lst/linux由 Dave Airlie 提交于
Lucas wrote: "a couple of small fixes: - 2 patches from Fabio to fix module reloading - one patch to fix a userspace visible regression, where the job timeout is a bit too eager and kills legitimate jobs" Signed-off-by: NDave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530868450.15725.8.camel@pengutronix.de
-
由 Ville Syrjälä 提交于
Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com> (cherry picked from commit 0ba7c51a) Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
-
- 09 7月, 2018 15 次提交
-
-
由 Russell King 提交于
Add the missing locks to the IRQ enable/disable paths, and fix a comment in the interrupt handler: reading the ISR clears down the status bits, but does not reset the interrupt so it can signal again. That seems to require a write. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Russell King 提交于
The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
由 Mikko Perttunen 提交于
Here we are checking for the buffer length, not an offset for writing to, so using > is correct. The current code incorrectly rejects a command buffer ending at the memory buffer's end. Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com> Reviewed-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Dmitry Osipenko 提交于
Only gather pins are mapped by the Host1x driver, regular BO relocations are not. Check whether size of unpin isn't 0, otherwise IOVA allocation at 0x0 could be erroneously released. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Dmitry Osipenko 提交于
Host1x's CDMA can't access the command buffers if IOMMU and Host1x firewall are enabled in the kernels config because firewall doesn't map the copied buffer into IOVA space. Fix this by skipping IOMMU initialization if firewall is enabled as firewall merges sparse cmdbufs into a single contiguous buffer and hence IOMMU isn't needed in this case. Signed-off-by: NDmitry Osipenko <digetx@gmail.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Arnd Bergmann 提交于
When the base sun4i DRM driver is built-in but the back-end is a loadable module, we run into a link error: drivers/gpu/drm/sun4i/sun4i_drv.o: In function `sun4i_drv_probe': sun4i_drv.c:(.text+0x60c): undefined reference to `sun4i_frontend_of_table' The dependency is a bit tricky, the best workaround I have come up with is to use a Makefile hack to to interpret both CONFIG_DRM_SUN4I_BACKEND=m and CONFIG_DRM_SUN4I_BACKEND=y as a directive to build the front-end the same way as the main module. Fixes: dd0421f4 ("drm/sun4i: Add a driver for the display frontend") Link: https://lore.kernel.org/lkml/20180301091908.zcptz3ezqr2c6ly5@flea/Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706142847.2032381-1-arnd@arndb.de
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A small collection of fixes, sort of the usual at this point, all for i.MX or OMAP: - Enable ULPI drivers on i.MX to avoid a hang - Pinctrl fix for touchscreen on i.MX51 ZII RDU1 - Fixes for ethernet clock references on am3517 - mmc0 write protect detection fix for am335x - kzalloc->kcalloc conversion in an OMAP driver - USB metastability fix for USB on dra7 - Fix touchscreen wakeup on am437x" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx_v4_v5_defconfig: Select ULPI support ARM: imx_v6_v7_defconfig: Select ULPI support ARM: dts: omap3: Fix am3517 mdio and emac clock references ARM: dts: am335x-bone-common: Fix mmc0 Write Protect bus: ti-sysc: Use 2-factor allocator arguments ARM: dts: dra7: Disable metastability workaround for USB2 ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl ARM: dts: am437x: make edt-ft5x06 a wakeup source
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/pti updates from Thomas Gleixner: "Two small fixes correcting the handling of SSB mitigations on AMD processors" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR x86/bugs: Update when to check for the LS_CFG SSBD mitigation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - Prevent an out-of-bounds access in mtrr_write() - Break a circular dependency in the new hyperv IPI acceleration code - Address the build breakage related to inline functions by enforcing gnu_inline and explicitly bringing native_save_fl() out of line, which also adds a set of _ARM_ARG macros which provide 32/64bit safety. - Initialize the shadow CR4 per cpu variable before using it. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mtrr: Don't copy out-of-bounds data in mtrr_write x86/hyper-v: Fix the circular dependency in IPI enlightenment x86/paravirt: Make native_save_fl() extern inline x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h> compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Thomas Gleixner: - The hopefully final fix for the reported race problems in kthread_parkme(). The previous attempt still left a hole and was partially wrong. - Plug a race in the remote tick mechanism which triggers a warning about updates not being done correctly. That's a false positive if the race condition is hit as the remote CPU is idle. Plug it by checking the condition again when holding run queue lock. - Fix a bug in the utilization estimation of a run queue which causes the estimation to be 0 when a run queue is throttled. - Advance the global expiration of the period timer when the timer is restarted after a idle period. Otherwise the expiry time is stale and the timer fires prematurely. - Cure the drift between the bandwidth timer and the runqueue accounting, which leads to bogus throttling of runqueues - Place the call to cpufreq_update_util() correctly so the function will observe the correct number of running RT tasks and not a stale one. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread, sched/core: Fix kthread_parkme() (again...) sched/util_est: Fix util_est_dequeue() for throttled cfs_rq sched/fair: Advance global expiration when period timer is restarted sched/fair: Fix bandwidth timer clock drift condition sched/rt: Fix call to cpufreq_update_util() sched/nohz: Skip remote tick on idle task entirely
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull objtool fix from Thomas Gleixner: "A single fix for objtool to address a bug in handling the cold subfunction detection for aliased functions which was added recently. The bug causes objtool to enter an infinite loop" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Support GCC 8 '-fnoreorder-functions'
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - add missing RETs in x86 aegis/morus - fix build error in arm speck * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86 - Add missing RETs crypto: arm/speck - fix building in Thumb2 mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bugfixes from Ted Ts'o: "Bug fixes for ext4; most of which relate to vulnerabilities where a maliciously crafted file system image can result in a kernel OOPS or hang. At least one fix addresses an inline data bug could be triggered by userspace without the need of a crafted file system (although it does require that the inline data feature be enabled)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: check superblock mapped prior to committing ext4: add more mount time checks of the superblock ext4: add more inode number paranoia checks ext4: avoid running out of journal credits when appending to an inline file jbd2: don't mark block as modified if the handle is out of credits ext4: never move the system.data xattr out of the inode body ext4: clear i_data in ext4_inode_info when removing inline data ext4: include the illegal physical block in the bad map ext4_error msg ext4: verify the depth of extent tree in ext4_find_extent() ext4: only look at the bg_flags field if it is valid ext4: make sure bitmaps and the inode table don't overlap with bg descriptors ext4: always check block group bounds in ext4_init_block_bitmap() ext4: always verify the magic number in xattr blocks ext4: add corruption check in ext4_xattr_set_entry() ext4: add warn_on_error mount option
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - Fix a use-after-free in the endpoint code (Dan Carpenter) - Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven) - Fix an nfp regression caused by a change in how we limit the number of VFs we can enable (Jakub Kicinski) - Fix failure path cleanup issues in the new R-Car gen3 PHY support (Marek Vasut) - Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc Guire) * tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: nfp: stop limiting VFs to 0 PCI/IOV: Reset total_VFs limit after detaching PF driver PCI: faraday: Add missing of_node_put() PCI: xilinx-nwl: Add missing of_node_put() PCI: xilinx: Add missing of_node_put() PCI: endpoint: Use after free in pci_epf_unregister_driver() PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes PCI: rcar: Clean up PHY init on failure PCI: rcar: Shut the PHY down in failpath
-
- 08 7月, 2018 1 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "Five smb3/cifs fixes for stable (including for some leaks and memory overwrites) and also a few fixes for recent regressions in packet signing. Additional testing at the recent SMB3 test event, and some good work by Paulo and others spotted the issues fixed here. In addition to my xfstest runs on these, Aurelien and Stefano did additional test runs to verify this set" * tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf() cifs: Fix infinite loop when using hard mount option cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting cifs: Fix memory leak in smb2_set_ea() cifs: fix SMB1 breakage cifs: Fix validation of signed data in smb2 cifs: Fix validation of signed data in smb3+ cifs: Fix use after free of a mid_q_entry
-