提交 92298c1c 编写于 作者: R Russell King

drm/armada: fix irq handling

Add the missing locks to the IRQ enable/disable paths, and fix a comment
in the interrupt handler: reading the ISR clears down the status bits,
but does not reset the interrupt so it can signal again.  That seems to
require a write.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
上级 d378859a
......@@ -519,8 +519,9 @@ static irqreturn_t armada_drm_irq(int irq, void *arg)
u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR);
/*
* This is rediculous - rather than writing bits to clear, we
* have to set the actual status register value. This is racy.
* Reading the ISR appears to clear bits provided CLEAN_SPU_IRQ_ISR
* is set. Writing has some other effect to acknowledge the IRQ -
* without this, we only get a single IRQ.
*/
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR);
......@@ -1116,16 +1117,22 @@ armada_drm_crtc_set_property(struct drm_crtc *crtc,
static int armada_drm_crtc_enable_vblank(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
unsigned long flags;
spin_lock_irqsave(&dcrtc->irq_lock, flags);
armada_drm_crtc_enable_irq(dcrtc, VSYNC_IRQ_ENA);
spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
return 0;
}
static void armada_drm_crtc_disable_vblank(struct drm_crtc *crtc)
{
struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc);
unsigned long flags;
spin_lock_irqsave(&dcrtc->irq_lock, flags);
armada_drm_crtc_disable_irq(dcrtc, VSYNC_IRQ_ENA);
spin_unlock_irqrestore(&dcrtc->irq_lock, flags);
}
static const struct drm_crtc_funcs armada_crtc_funcs = {
......@@ -1415,6 +1422,7 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev,
CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1);
writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1);
writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA);
readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR);
writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR);
ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册