- 14 4月, 2011 31 次提交
-
-
由 Emil Tantilov 提交于
x540 has the same device capability word in the EEPROM as 82599. This patch renames ixgbe_get_device_caps_82599 to ixgbe_get_device_caps_generic, moves it to ixgbe_common.h and sets up the function pointer for x540. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
100H is not supported on this HW, but the bit is set on the PHY. This can result in link at 100F when advertising only 1000F. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Add new device ID supported by ixgbe. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
HW can upload EEPROM content from flash while in a middle of checksum calculation. Take NVM ownership for the whole process of checksum update. Call ixgbe_read_eerd_generic() and ixgbe_write_eewr_generic() directly to avoid double take of semaphores which leads to long loading times. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Since msleep might not sleep for the desired amount when less than 20ms use usleep_range. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Disable KR to KX4/KX downshift on 82599 backplane devices when LESM (Link Establishment State Machine) is enabled in FW. Those features cannot co-exist as they both manipulate the same registers. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhillip Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Relaxed ordering can lead to issues with some chipsets. This patch makes sure that it is disabled by default and not only when DCA is on. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Factored out the common start_hw code into a new function ixgbe_start_hw_gen2() so that it can be used by x540 and 82599. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com>
-
由 Emil Tantilov 提交于
Set ixgbe_identify_82599() as static Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Some 82598 parts have LAN0 disabled and LAN1 enabled and the LAN ID bits in Device Status register report the NIC as having only LAN1 as enabled. This causes ixgbe_set_lan_id_multi_port_pcie() to set bus->func = 1 which is incorrect. Force bus->func to 0 when LAN0 is disabled in the EEPROM. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
The value of status was incorrectly tested. Also whitespace cleanup. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NEvan Swanson <evan.swanson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 John Fastabend 提交于
With the app data on the kernel dcb_app list we no longer need to specifically handle them in ixgbe for the CEE case. So now we can remove app handling logic and check when the hw is configured if the app data matches the hardware configuration in set_hw_all(). If it does not match then we can reconfigure. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
Based on a patch from Naga Chumbalkar <nagananda.chumbalkar@hp.com>: If ASPM L0s needs to be disabled due to HW errata, do it prior to "enabling" the device. This way if the kernel ever defaults its aspm_policy to POLICY_POWERSAVE, then the e1000e driver will get a chance to disable ASPM on the misbehaving device *prior* to calling pci_enable_device_mem(). This will be useful in situations where the BIOS indicates ASPM support on the server by clearing the ACPI FADT "ASPM Controls" bit. Note: The kernel (2.6.38) currently uses the BIOS "default" as its aspm_policy. However, Linux distros can diverge from that and set the default to "powersave". v2: o cleanup namespace pollution of e1000e_disable_aspm(), o fix type and initialization of the new aspm_disable_flag in a few functions, and o redefine FLAG2_DISABLE_ASPM_L0S to the first unused bit in adapter->flags2. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Flavio Leitner 提交于
Just move the unlock down a bit because it unlocks too early leaving a chance for get_stats64() run in parallel while it is still accessing the stats. Signed-off-by: NFlavio Leitner <fleitner@redhat.com> Acked-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
This switches the e1000e driver to use the new VLAN interfaces. CC: Jesse Gross <jesse@nicira.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
-
由 Bruce Allan 提交于
Correct the log message when driver loads. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bruce Allan 提交于
With durations less than 20ms, the jiffies or legacy timer backed msleep() may sleep ~20ms which might not be what the caller expects. Instead, it is recommended to use the hrtimers backed usleep_range(). For more, see Documentation/timers/timers-howto.txt. Issues reported by checkpatch. In addition, remove unnecessary sleep in e1000e_write_nvm_spi(). Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stefan Assmann 提交于
The code for thermal sensor checking should be wrapped into a function. Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stefan Assmann 提交于
Comment spelling fix. Signed-off-by: NStefan Assmann <sassmann@kpanic.de> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Add the documentation for the anti-spoofing feature in the HW. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mathieu J. Poirier 提交于
This is a revised patch that permits a shifted access to the LAN9221 registers. More specifically: It adds a shift parameter in the platform_data. It introduces an ops in smsc911x_data. A choice of access function to use at run-time. Four new shifted access function. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NAlessandro Rubini <rubini@gnudd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
In some devices, the VPD block is relocated to a different area in NVRAM. The original location can still contain old, but still valid VPD data. This patch changes the code to look for an extended VPD block in NVRAM. If one is found, that block is used for all VPD operations instead. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds jumbo frame loopback test support to the ethtool selftest. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch reimplements the size preprocessor constants of the stats and ethtool test string arrays. The size is calculated at compile time rather than using static constants. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch monitors the error bit of the status word within the status block. If it is set, the driver will dump the driver state after validating the error and then reset the chip. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The current amount of information provided in the output of a tx timeout is insufficient to determine a root cause. This patch replaces the terse, four-register status output with a more complete body of information. For PCIe devices, the full register space is dumped. For other devices, select registers are dumped instead. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Some RNDIS devices don't respond on the control channel until polled on the status channel. In particular, this was reported to be the case for the 2Wire HomePortal 1000SW and for some Windows Mobile devices. This is roughly based on a patch by John Carr <john.carr@unrouted.co.uk> which is currently applied by Mandriva. Reported-by: NMark Glassberg <vzeeaxwl@myfairpoint.net> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe Cavallaro 提交于
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Stein 提交于
Signed-off-by: NAlexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 amit salecha 提交于
Ethtool support to configure RX, TX and other channels. combined field in struct ethtool_channels to reflect set of channel (RX, TX or other). Other channel can be link interrupts, SR-IOV coordination etc. ETHTOOL_GCHANNELS will report max and current number of RX channels, max and current number of TX channels, max and current number of other channel or max and current number of combined channel. Number of channel can be modify upto max number of channel through ETHTOOL_SCHANNELS command. Ben Hutchings: o define 'combined' and 'other' types. Most multiqueue drivers pair up RX and TX queues so that most channels combine RX and TX work. o Please could you use a kernel-doc comment to describe the structure. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2011 9 次提交
-
-
由 David S. Miller 提交于
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
由 David S. Miller 提交于
The "iavcc" and "iadev" cases are obvious. The intr_status and frmr_intr cases are reading a register to clear the chip status. This driver is pretty old and creaky, and uses volatile pointer dereferences to do register I/O when it should be using readl() and friends. However that it outside of the scope of these changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fixes the following warnings: net/9p/client.c:1305:18: warning: variable ‘total’ set but not used [-Wunused-but-set-variable] net/9p/client.c:1370:18: warning: variable ‘total’ set but not used [-Wunused-but-set-variable] net/9p/client.c:1769:18: warning: variable ‘total’ set but not used [-Wunused-but-set-variable] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Since ndo_fix_features callback is postponing features change when bp->recovery_state != BNX2X_RECOVERY_DONE, netdev_update_features() has to be called again when this condition changes. Previously, ethtool_ops->set_flags callback returned -EBUSY in that case (it's not possible in the new model). Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> v5: - don't delay set_features, as it's rtnl_locked - same as recovery process v4: - complete bp->rx_csum -> NETIF_F_RXCSUM conversion - add check for failed ndo_set_features in ndo_open callback v3: - include NETIF_F_LRO in hw_features - don't call netdev_update_features() if bnx2x_nic_load() failed v2: - comment in ndo_fix_features callback Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Note: looks like bnad->conf_mutex is duplicating rtnl_lock. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michał Mirosław 提交于
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-