net: bnx2x: convert to hw_features

Since ndo_fix_features callback is postponing features change when
bp->recovery_state != BNX2X_RECOVERY_DONE, netdev_update_features()
has to be called again when this condition changes. Previously,
ethtool_ops->set_flags callback returned -EBUSY in that case
(it's not possible in the new model).
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>

v5: - don't delay set_features, as it's rtnl_locked - same as recovery process
v4: - complete bp->rx_csum -> NETIF_F_RXCSUM conversion
    - add check for failed ndo_set_features in ndo_open callback
v3: - include NETIF_F_LRO in hw_features
    - don't call netdev_update_features() if bnx2x_nic_load() failed
v2: - comment in ndo_fix_features callback
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x.h

@@ -918,7 +918,6 @@ struct bnx2x {
 
 	int			tx_ring_size;
 
-	u32			rx_csum;
 /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
 #define ETH_OVREHEAD		(ETH_HLEN + 8 + 8)
 #define ETH_MIN_PACKET_SIZE		60

drivers/net/bnx2x/bnx2x_cmn.c

@@ -640,7 +640,7 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
 			skb_checksum_none_assert(skb);
 
-			if (bp->rx_csum) {
+			if (bp->dev->features & NETIF_F_RXCSUM) {
 				if (likely(BNX2X_RX_CSUM_OK(cqe)))
 					skb->ip_summed = CHECKSUM_UNNECESSARY;
 				else
@@ -2443,11 +2443,21 @@ int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
 
 }
 
+static int bnx2x_reload_if_running(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	if (unlikely(!netif_running(dev)))
+		return 0;
+
+	bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+	return bnx2x_nic_load(bp, LOAD_NORMAL);
+}
+
 /* called with rtnl_lock */
 int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	int rc = 0;
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
 		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
@@ -2464,12 +2474,39 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 	 */
 	dev->mtu = new_mtu;
 
-	if (netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	return bnx2x_reload_if_running(dev);
+}
+
+u32 bnx2x_fix_features(struct net_device *dev, u32 features)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	/* TPA requires Rx CSUM offloading */
+	if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa)
+		features &= ~NETIF_F_LRO;
+
+	return features;
+}
+
+int bnx2x_set_features(struct net_device *dev, u32 features)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	u32 flags = bp->flags;
+
+	if (features & NETIF_F_LRO)
+		flags |= TPA_ENABLE_FLAG;
+	else
+		flags &= ~TPA_ENABLE_FLAG;
+
+	if (flags ^ bp->flags) {
+		bp->flags = flags;
+
+		if (bp->recovery_state == BNX2X_RECOVERY_DONE)
+			return bnx2x_reload_if_running(dev);
+		/* else: bnx2x_nic_load() will be called at end of recovery */
 	}
 
-	return rc;
+	return 0;
 }
 
 void bnx2x_tx_timeout(struct net_device *dev)

drivers/net/bnx2x/bnx2x_cmn.h

@@ -431,6 +431,9 @@ void bnx2x_free_mem_bp(struct bnx2x *bp);
  */
 int bnx2x_change_mtu(struct net_device *dev, int new_mtu);
 
+u32 bnx2x_fix_features(struct net_device *dev, u32 features);
+int bnx2x_set_features(struct net_device *dev, u32 features);
+
 /**
  * tx timeout netdev callback
  *

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -1299,91 +1299,6 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int changed = 0;
-	int rc = 0;
-
-	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
-		return -EAGAIN;
-	}
-
-	if (!(data & ETH_FLAG_RXVLAN))
-		return -EINVAL;
-
-	if ((data & ETH_FLAG_LRO) && bp->rx_csum && bp->disable_tpa)
-		return -EINVAL;
-
-	rc = ethtool_op_set_flags(dev, data, ETH_FLAG_LRO | ETH_FLAG_RXVLAN |
-					ETH_FLAG_TXVLAN | ETH_FLAG_RXHASH);
-	if (rc)
-		return rc;
-
-	/* TPA requires Rx CSUM offloading */
-	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
-		if (!(bp->flags & TPA_ENABLE_FLAG)) {
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-	} else if (bp->flags & TPA_ENABLE_FLAG) {
-		dev->features &= ~NETIF_F_LRO;
-		bp->flags &= ~TPA_ENABLE_FLAG;
-		changed = 1;
-	}
-
-	if (changed && netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
-
-	return rc;
-}
-
-static u32 bnx2x_get_rx_csum(struct net_device *dev)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-
-	return bp->rx_csum;
-}
-
-static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int rc = 0;
-
-	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. Try again later\n");
-		return -EAGAIN;
-	}
-
-	bp->rx_csum = data;
-
-	/* Disable TPA, when Rx CSUM is disabled. Otherwise all
-	   TPA'ed packets will be discarded due to wrong TCP CSUM */
-	if (!data) {
-		u32 flags = ethtool_op_get_flags(dev);
-
-		rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
-	}
-
-	return rc;
-}
-
-static int bnx2x_set_tso(struct net_device *dev, u32 data)
-{
-	if (data) {
-		dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-		dev->features |= NETIF_F_TSO6;
-	} else {
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO_ECN);
-		dev->features &= ~NETIF_F_TSO6;
-	}
-
-	return 0;
-}
-
 static const struct {
 	char string[ETH_GSTRING_LEN];
 } bnx2x_tests_str_arr[BNX2X_NUM_TESTS] = {
@@ -2207,16 +2122,6 @@ static const struct ethtool_ops bnx2x_ethtool_ops = {
 	.set_ringparam		= bnx2x_set_ringparam,
 	.get_pauseparam		= bnx2x_get_pauseparam,
 	.set_pauseparam		= bnx2x_set_pauseparam,
-	.get_rx_csum		= bnx2x_get_rx_csum,
-	.set_rx_csum		= bnx2x_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
-	.set_flags		= bnx2x_set_flags,
-	.get_flags		= ethtool_op_get_flags,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= bnx2x_set_tso,
 	.self_test		= bnx2x_self_test,
 	.get_sset_count		= bnx2x_get_sset_count,
 	.get_strings		= bnx2x_get_strings,

drivers/net/bnx2x/bnx2x_main.c

@@ -8904,8 +8904,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->multi_mode = multi_mode;
 	bp->int_mode = int_mode;
 
-	bp->dev->features |= NETIF_F_GRO;
-
 	/* Set TPA flags */
 	if (disable_tpa) {
 		bp->flags &= ~TPA_ENABLE_FLAG;
@@ -8925,8 +8923,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 
 	bp->tx_ring_size = MAX_TX_AVAIL;
 
-	bp->rx_csum = 1;
-
 	/* make sure that the numbers are in the right granularity */
 	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
 	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
@@ -9304,6 +9300,8 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= bnx2x_ioctl,
 	.ndo_change_mtu		= bnx2x_change_mtu,
+	.ndo_fix_features	= bnx2x_fix_features,
+	.ndo_set_features	= bnx2x_set_features,
 	.ndo_tx_timeout		= bnx2x_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2x,
@@ -9430,20 +9428,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	dev->netdev_ops = &bnx2x_netdev_ops;
 	bnx2x_set_ethtool_ops(dev);
-	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	if (bp->flags & USING_DAC_FLAG)
-		dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->features |= NETIF_F_TSO6;
-	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
 
-	dev->vlan_features |= NETIF_F_SG;
-	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
+
+	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
 	if (bp->flags & USING_DAC_FLAG)
-		dev->vlan_features |= NETIF_F_HIGHDMA;
-	dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->vlan_features |= NETIF_F_TSO6;
+		dev->features |= NETIF_F_HIGHDMA;
 
 #ifdef BCM_DCBNL
 	dev->dcbnl_ops = &bnx2x_dcbnl_ops;