- 24 7月, 2014 1 次提交
-
-
由 David Härdeman 提交于
Right now the protocol information is not preserved, rc-core gets handed a scancode but has no idea which protocol it corresponds to. This patch (which required reading through the source/keymap for all drivers, not fun) makes the protocol information explicit which is important documentation and makes it easier to e.g. support multiple protocols with one decoder (think rc5 and rc-streamzap). The information isn't used yet so there should be no functional changes. [m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing] Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 08 11月, 2013 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb-v2/af9015.c:433:1: warning: 'af9015_eeprom_hash' uses dynamic stack allocation [enabled by default] In this specific case, it is a gcc bug, as the size is a const, but it is easy to just change it from const to a #define, getting rid of the gcc warning. Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 22 3月, 2013 1 次提交
-
-
由 Antti Palosaari 提交于
That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 3月, 2013 1 次提交
-
-
由 Antti Palosaari 提交于
WARNING: at lib/dma-debug.c:947 check_for_stack+0xa7/0xf0() ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack Reported-by: Npoma <pomidorabelisima@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 1月, 2013 2 次提交
-
-
由 Antti Palosaari 提交于
replace: #if defined(CONFIG_RC_CORE) || defined(CONFIG_RC_CORE_MODULE) with: #if IS_ENABLED(CONFIG_RC_CORE) Reported-by: NFabio Estevam <festevam@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Do not compile remote controller when RC-core is disabled by Kconfig. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 10月, 2012 1 次提交
-
-
由 David Härdeman 提交于
The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 10月, 2012 1 次提交
-
-
由 Peter Senna Tschudin 提交于
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> [mchehab@redhat.com: some hunks got bitroted; applied only the ones that succeeds] Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> [crope@iki.fi: For my drivers a8293, af9013, af9015, af9035] Acked-by: NAntti Palosaari <crope@iki.fi> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 24 9月, 2012 4 次提交
-
-
由 Antti Palosaari 提交于
Plain '-1' is not very good error code. Use more suitable error code definitions. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
... and some minor logging changes. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 8月, 2012 1 次提交
-
-
由 Antti Palosaari 提交于
All these seems to survive .reset_resume. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 8月, 2012 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
As media/dvb will be removed, move it to a proper place. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Shevchenko 提交于
[crope@iki.fi: fix trivial merge conflict] Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 04 8月, 2012 12 次提交
-
-
由 Antti Palosaari 提交于
1) AF9015 remote controller query will fail rarely due to register access failures and dvb_usb_v2 will stop rc polling when error returned. Add logic to allow errors until two consecutive errors occurs. 2) Remote controller key map was not loaded in case of key map was set as a device property. Fix it. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Move to own directory. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
It failed to register device when remote keymap was not set. Fix it to register device even keymap is NULL. In that case just skip remote registration. Driver should set RC_MAP_EMPTY to enable remote in case of there is remote receiver but default keymap is unknown. Reported-by: Npierigno <pierigno@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Merge get_firmware_name() to identify_state(). It is wise to resolve firmware name in that routine as it does decision wether or not to load firmware at all. It is one very rarely needed callback less. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Piggypag TS type callback to USB stream callback and change callback name slightly to fit better. Both of those are rather rare callback and has a relation. Transport Stream, TS, is input stream and USB stream is output stream of DVB USB bridge. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Move frontend_attach, tuner_attach, frontend_ctrl and streaming_ctrl from adapter to device. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
I think it is better to allow driver finish pending operations and disconnect device. Killing all ongoing USB transfers could have very bad effect, even break hardware in worst case. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Almost all hacks are now removed and much less code. Reducing af9015 driver code from 2084 to 1609, it is almost 500 LOC less! Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 15 5月, 2012 1 次提交
-
-
由 Antti Palosaari 提交于
Clean-up dvb_usb_device_properties and fix errors reported by checkpatch.pl. Some other very minor changes. Functionality remains untouched. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 3月, 2012 2 次提交
-
-
由 Antti Palosaari 提交于
Some changes for previous patch I liked to do. Just move tuner init and sleep to own functions from the demod init and sleep functions. Functionality remains still almost the same. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Gordon Hecker 提交于
The i2c failures were caused by enabling both i2c gates at the same time while putting the tuners asleep. This patch removes the init() and sleep() callbacks from the tuner, to prevent frontend.c from calling i2c_gate_ctrl tuner init / sleep i2c_gate_ctrl without holding the lock. tuner init() and sleep() are instead called in frontend init() and sleep(). Signed-off-by: NGordon Hecker <ghecker@gmx.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 11 1月, 2012 1 次提交
-
-
由 Jonathan Nieder 提交于
The af9005_properties and af9015_properties tables make use of USB ids from the USB id tables with hardcoded indices, as in "&af9015_usb_table[30]". Adding new entries before the end breaks such references, so everyone has had to carefully tiptoe to only add entries at the end of the list. In the spirit of "dw2102: use symbolic names for dw2102_table indices", use C99-style initializers with symbolic names for each index to avoid this. In the new regime, properties tables referring to the USB ids have names like "&af9015_usb_table[CINERGY_T_STICK_RC]" that do not change meaning when items in the USB id table are reordered. Encouraged-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJonathan Nieder <jrnieder@gmail.com> Acked-by: NLuca Olivetti <luca@ventoso.org> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 12月, 2011 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Instead of using dvb_frontend_parameters struct, that were designed for a subset of the supported standards, use the DVBv5 cache information. Also, fill the supported delivery systems at dvb_frontend_ops struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Rewrite whole af9013 demod driver in order to decrease I2C I/O. We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used) seems to have some problems under heavy I2C traffic. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
AF9015 firmware does not like if it gets interrupted by I2C adapter request on some critical phases. During normal operation I2C adapter is used only 2nd demodulator and tuner on dual tuner devices. Override demodulator callbacks and use mutex for limit access to those "critical" paths to keep AF9015 happy. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 13 12月, 2011 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This reverts commit ff83bd82. As requested by Antti: From a talk with him at #linuxtv irc, he strong feeling that some apps like MythTV will do a lot a lot of I2C I/O and now it adds locks, with utimatelly means more delays. This could cause bad effects. There is a new patch for 3.3 that re-writes af9013 in order to limit I2C I/O. and thus those patches could be nice to have together because those user who has has problems are most likely MythTV users. So, let's revert this commit for now. Requested-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 11月, 2011 1 次提交
-
-
由 Antti Palosaari 提交于
AF9015 firmware does not like if it gets interrupted by I2C adapter request on some critical phases. During normal operation I2C adapter is used only 2nd demodulator and tuner on dual tuner devices. Override demodulator callbacks and use mutex for limit access to those "critical" paths to keep AF9015 happy. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 11月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 9月, 2011 1 次提交
-
-
由 Michael Krufky 提交于
refactor MFE code to allow for individual streaming configuration for each frontend Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Reviewed-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 8月, 2011 2 次提交
-
-
由 Antti Palosaari 提交于
Style issue. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Thanks to Thomas Gutzler for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Cc: Thomas Gutzler <thomas.gutzler@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-