Reported by Dan Carpenter:

The patch d10d1b9a: "[media] dvb_usb_v2: use dev_* logging
macros" from Jun 26, 2012, leads to the following Smatch complaint:

drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c:31 dvb_usb_v2_generic_io()
	 error: we previously assumed 'd' could be null (see line 29)

...
Remove whole check as it must not happen in any case. Driver is
totally broken if it does not have valid pointer to device.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Normally, ADAP_STREAMING bit is set in dvb_usb_start_feed and cleared in
dvb_usb_stop_feed.

But in exceptional cases, for example, when the tv is playing programs
and the tuner is pulled out, then dvb_usbv2_disconnect is called.

In such case, it will first call dvb_usbv2_adapter_frontend_exit to stop
dvb_frontend_thread, and then call dvb_usbv2_adapter_dvb_exit to clear
ADAP_STREAMING bit.

At this point, if dvb_frontend_thread is sleeping and waiting for
ADAP_STREAMING to be cleared to get out of sleep. then
dvb_frontend_thread can never be stoped, because clearing ADAP_STREAMING
bit is performed after dvb_frontend_thread is stopped (i.e. performed in
dvb_usbv2_adapter_dvb_exit).

So, deadlock:

[  240.822037] INFO: task khubd:497 blocked for more than 120 seconds.
[  240.822655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.830493] khubd           D c0013b3c     0   497      2 0x00000000
[  240.836996] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c00110f4>] (schedule_timeout+0x14c/0x19c)
[  240.845940] [<c00110f4>] (schedule_timeout+0x14c/0x19c) from [<c00137f4>] (wait_for_common+0xac/0x150)
[  240.855234] [<c00137f4>] (wait_for_common+0xac/0x150) from [<c004989c>] (kthread_stop+0x58/0x90)
[  240.864004] [<c004989c>] (kthread_stop+0x58/0x90) from [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c)
[  240.872849] [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) from [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8)
[  240.882666] [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) from [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc)
[  240.892204] [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) from [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70)
[  240.901499] [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) from [<c031c050>] (usb_unbind_interface+0x58/0x188)
[  240.911395] [<c031c050>] (usb_unbind_interface+0x58/0x188) from [<c02c3e78>] (__device_release_driver+0x74/0xd0)
[  240.921544] [<c02c3e78>] (__device_release_driver+0x74/0xd0) from [<c02c3ef0>] (device_release_driver+0x1c/0x28)
[  240.931697] [<c02c3ef0>] (device_release_driver+0x1c/0x28) from [<c02c39b8>] (bus_remove_device+0xc4/0xe4)
[  240.941332] [<c02c39b8>] (bus_remove_device+0xc4/0xe4) from [<c02c1344>] (device_del+0xf4/0x178)
[  240.950106] [<c02c1344>] (device_del+0xf4/0x178) from [<c0319eb0>] (usb_disable_device+0xa0/0x1c8)
[  240.959040] [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) from [<c03128b4>] (usb_disconnect+0x88/0x188)
[  240.968326] [<c03128b4>] (usb_disconnect+0x88/0x188) from [<c0313edc>] (hub_thread+0x4d0/0x1200)
[  240.977100] [<c0313edc>] (hub_thread+0x4d0/0x1200) from [<c0049690>] (kthread+0xa4/0xb0)
[  240.985174] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)
[  240.993259] INFO: task kdvb-ad-0-fe-0:3256 blocked for more than 120 seconds.
[  241.000349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.008162] kdvb-ad-0-fe-0  D c0013b3c     0  3256      2 0x00000000
[  241.014507] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c03eda44>] (wait_schedule+0x8/0x10)
[  241.022924] [<c03eda44>] (wait_schedule+0x8/0x10) from [<c001120c>] (__wait_on_bit+0x74/0xb8)
[  241.031434] [<c001120c>] (__wait_on_bit+0x74/0xb8) from [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70)
[  241.040902] [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) from [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc)
[  241.050618] [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) from [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8)
[  241.060164] [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) from [<c0049690>] (kthread+0xa4/0xb0)
[  241.068929] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c)

Fix it by calling dvb_usbv2_adapter_frontend_exit() latter.

Test enviroment: odroidx2 + Hauppauge(WinTV-Aero-M)
Signed-off-by: NChangbing Xiong <cb.xiong@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Tuner ID set into EEPROM is wrong, which causes driver to select
wrong tuner profile. That leads device non-working. Fix issue by
overriding known bad tuner IDs with suitable default value.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Added Sveon STV21 device based on Realtek RTL2832U and FC0013 tuner
Signed-off-by: NSebastian Kemper <sebastian_ml@gmx.net>
Acked-by: NAntti Palosaari <crope@iki.fi>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The basic API of rc-core used to be:

	dev = rc_allocate_device();
	dev->x = a;
	dev->y = b;
	dev->z = c;
	rc_register_device();

which is a pretty common pattern in the kernel, after the introduction of
protocol arrays the API looks something like:

	dev = rc_allocate_device();
	dev->x = a;
	rc_set_allowed_protocols(dev, RC_BIT_X);
	dev->z = c;
	rc_register_device();

There's no real need for the protocols to be an array, so change it
back to be consistent (and in preparation for the following patches).

[m.chehab@samsung.com: added missing changes at some files]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Right now the protocol information is not preserved, rc-core gets handed a
scancode but has no idea which protocol it corresponds to.

This patch (which required reading through the source/keymap for all drivers,
not fun) makes the protocol information explicit which is important
documentation and makes it easier to e.g. support multiple protocols with one
decoder (think rc5 and rc-streamzap). The information isn't used yet so there
should be no functional changes.

[m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing]
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Move rtl2832_sdr driver module from staging to media.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NNeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brownSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Tuner ID set into EEPROM is wrong in some cases, which causes driver
to select wrong tuner profile. That leads device non-working. Fix
issue by overriding known bad tuner IDs with suitable default value.

Thanks to MX-NET Telekomunikace s.r.o. for providing non-working
DTV stick, that I could fix the bug!

Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Change handling of signal_lock on rs2000. Use ibuf[2] to detect
lock as there is a longer wait for lock to appear in ibuf[6].

Remove last_key and key_timeout and use jiffies plus 60ms
to detect that streaming is still active.

If the current jiffies is time_after the interrupt urb overdue and
clear signal lock.

This results in far faster recovery of lock and streaming.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Added support for Sveon STV27 device (rtl2832u + FC0013 tuner)
Signed-off-by: NAlessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner
Signed-off-by: NAlessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add USB ID for Peak DVB-T USB.

[crope@iki.fi: fix Brian email address and indentation]
Signed-off-by: NBrian Healy <healybrian@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Mostly scripted conversion of the smp_mb__* barriers.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It printed a little bit too heavy looking error log "DVB: Unable to
find symbol rtl2832_sdr_attach()" when staging module was disabled.
Silence that error by introducing own version of dvb_attach() macro
without the error logging.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

RTL2832 SDR extension module is currently on staging. SDR module
headers were included from staging causing direct dependency staging
directory. As a solution, add needed headers to main driver.
Motivation of that change comes from Luis / driver backports project.
Reported-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com>
Cc: backports@vger.kernel.org
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That ID was added twice mistakenly.
1st commit ac298ccd
2nd commit 1c1b8734

Revert commit 1c1b8734Reported-by: NJan Vcelak <jv@fcelda.cz>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Exporting functions for hardware filter is a bad idea, as it
breaks compilation if:
	CONFIG_DVB_USB_AF9035=y
	CONFIG_DVB_AF9033=m

Because the PID filter function calls would be hardcoded at
af9035.

The same doesn't happen with af9033_attach() because the
dvb_attach() doesn't hardcode it. Instead, it dynamically
links it at runtime.

However, calling dvb_attach() multiple times is problematic,
as it increments module kref.

So, the better is to pass one parameter for the af9033 module
to fill the hardware filters, and then use it inside af9035.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

PID filters are property of af9033 demod. Use PID filters from af9033
driver as it provides those now.

Allow possible dual mode on USB 1.1 mode too as bandwidth could be
just enough when filters are used on both frontends.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate
control. Pass those adapters to rtl2832_sdr and e4000 modules in order
to get rid of proprietary DVB .i2c_gate_ctrl() callback use.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We need depend on I2C_MUX as rtl2832 demod used requires it.

All error/warnings:
warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX)
ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!
ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined!
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Use break, not return, for every case.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

With that extension module it supports SDR.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Optimize a little bit from data to text.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Driver conversion from proprietary DVB tuner model to more
general I2C driver model.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832]

The USB dongle uses RTL2832U demodulator and FC0012 tuner.
Signed-off-by: NJan Vcelak <jv@fcelda.cz>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The allowed and enabled protocol masks need to be expanded to be per
filter type in order to support wakeup filter protocol selection. To
ease that process abstract access to the rc_dev::allowed_protos and
rc_dev::enabled_protocols members with inline functions.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAntti Seppälä <a.seppala@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

All used tuners has get_if_frequency() callback and that parameter
is not needed and will not needed as all upcoming tuner drivers
should implement get_if_frequency().
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Disable IR interrupts in order to avoid SDR sample loss.
IR interrupts causes some extra load for device and it seems
be one reason to loss samples when sampling rate is high.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: NJan Vcelak <jv@fcelda.cz>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

0458:707f KYE Systems Corp. (Mouse Systems) TVGo DVB-T03 [RTL2832]

The USB dongle uses RTL2832U demodulator and FC0012 tuner.
Signed-off-by: NJan Vcelak <jv@fcelda.cz>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Following moving ids to af9035.

This driver is no longer in use.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some device vendors has forgotten set correct slave demod I2C address
to eeprom. Use default I2C address when eeprom has no address at all.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As follow on to patch
af9035: Move it913x single devices to af9035
and patch 1.

SNR is reported as db/10 values.

All dual ids are added to af9035 and it913x driver disabled.

it913x/it913x-fe removal patches to follow.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR.

Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the
default slave address of 0x3a on 0x9135 devices.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The generic v1 and v2 devices have been all tested.

IDs tested
USB_PID_ITETECH_IT9135 v1 & v2
USB_PID_ITETECH_IT9135_9005 v1
USB_PID_ITETECH_IT9135_9006 v2

Current Issues
There is no signal  on
USB_PID_ITETECH_IT9135 v2

No SNR reported all devices.

All single devices tune and scan fine.

All remotes tested okay.

Dual device failed to register second adapter
USB_PID_KWORLD_UB499_2T_T09
It is not clear what the problem is at the moment.

So only single IDs are transferred in this patch.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

I've got the following DAB USB stick that also works fine with the
DVB_USB_RTL28XXU driver after I added its USB ID:
	Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH

[crope@iki.fi: apply patch partly manually]
Signed-off-by: NTill Dörges <till@doerges.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There are several left overs with my old email address.
Remove their occurrences and add myself at CREDITS, to
allow people to be able to reach me on my new addresses.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>