- 16 6月, 2009 6 次提交
-
-
由 Haiying Wang 提交于
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
As of commit 40461472 ("Update FSL esdhc binding"), we use "fsl,esdhc" compatible entry as a base match. U-Boot will use the same compatible to fixup esdhc nodes. This patch updates 83xx dts files so that they conform to the new bindings. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Nate Case 提交于
Some boot loaders may not enable L1 instruction/data cache. Check if data and instruction caches are enabled, and enable them if needed. Signed-off-by: NNate Case <ncase@xes-inc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
The current device tree for the MPC8272ADS assumes a mapping of 32 MB of NOR flash at 0xFE00.0000, while there are actually only 8 MB on the boards, mapped at 0xFF80.0000. When booting an uImage with such a device tree, the kernel crashes because 0xFE00.0000 is not mapped. Also introduce aliases for serial[01] and ethernet[01]. Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Add the platform-specific code for enabling SWIOTLB if needed on P2020DS, MPC85xx DS, and MPC85xx MDS boards as they are capable of having >4G of memory. We determine if we need to enable swiotlb based on how much memory is in the board and if it exceeds 4G or what we can map via PCI inbound windows. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Becky Bruce 提交于
This is the final bit of code to allow enabling swiotlb on mpc86xx. The platform-specific code is very small and consists of enabling SWIOTLB in the config file, registering the swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops to point to swiotlb_pci_dma_ops if we have more memory than can be mapped by the inbound PCI windows. Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 15 6月, 2009 18 次提交
-
-
由 Geert Uytterhoeven 提交于
Currently the FLASH database is updated by the kernel using file operations, meant for userspace only. While this works for us because copy_{from,to}_user() on powerpc can handle kernel pointers, this is unportable and a bad example. Replace the file operations by callbacks, registered by the ps3flash driver. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
They were never intended to be exported using EXPORT_SYMBOL() anyway Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
It reports the failure of a call to lv1_put_iopte(), not lv1_map_device_dma_region(). Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Jim Paris <jim@jtan.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
This makes 32-bit powerpc use the generic atomic64_t implementation. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Paul Mackerras 提交于
On 32-bit non-Book E, local_irq_restore() turns into just mtmsr(), which doesn't currently have a compiler memory barrier. This means that accesses to memory inside a local_irq_save/restore section, or a spin_lock_irqsave/spin_unlock_irqrestore section on UP, can be reordered by the compiler to occur outside that section. To fix this, this adds a compiler memory barrier to mtmsr for both 32-bit and 64-bit. Having a compiler memory barrier in mtmsr makes sense because it will almost always be changing something about the context in which memory accesses are done, so in general we don't want memory accesses getting moved from one side of an mtmsr to the other. With the barrier in mtmsr(), some of the explicit barriers in hw_irq.h are now redundant, so this removes them. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
signal_vsp_instruction() is currently only used if CONFIG_PROC_FS is enabled. However logically it has nothing to do with PROC_FS, so rather than making it depend on that mark it as maybe unused. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
If CONFIG_BLK_DEV_INITRD is unset dt_prop_u64() is unused, which causes a warning. We don't really want to tie the definition to BLK_DEV_INITRD, so mark it as maybe unused. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Commit 28794d34 ("powerpc/kconfig: Kill PPC_MULTIPLATFORM"), added CONFIG_PPC_OF_BOOT_TRAMPOLINE to control the buliding of prom_init.o However the Makefile still unconditionally builds prom_init_check, the script that checks prom_init.o for symbol usage, and so in turn prom_init.o is still always being built. (it's not linked though) So surround all the prom_init_check logic with an ifeq block testing if CONFIG_PPC_OF_BOOT_TRAMPOLINE is set. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The Axon MSI driver incorrectly uses platform_data, rather than the proper accessors for driver_data. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
When CONFIG_RELOCATABLE is enabled, PHYSICAL_START is actually a variable of type phys_addr_t. That means to print it we need to cast to unsigned long long and use llx. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
During cleanup, use L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE to tear down the setup done by L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP. This allows unloading and reloading of ps3fb while the sound driver keeps the GPU open. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Both arch/powerpc/platforms/cell/iommu.c and arch/powerpc/platforms/ps3/mm.c contain the same Cell IOMMU page table entry definitions. Extract them and move them to <asm/iommu.h>, while adding a CBE_ prefix. This also allows them to be used by drivers. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Currently we are wasting time calling the generic calibrate_delay() function. We don't need it since our implementation of __delay() is based on the CPU timebase. So instead, we use our own small implementation that initializes loops_per_jiffy to something sensible to make the few users like spinlock debug be happy Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Grant Likely 提交于
If anything goes wrong when copying images into the install path, then the install script should exit with an error code so that 'make' knows about it and tells the user. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 14 6月, 2009 4 次提交
-
-
由 Nicolas Pitre 提交于
Without this, the default implementation is a no op which is completely wrong with a VIVT cache, and usage of sg_copy_buffer() produces unpredictable results. Tested-by: NSebastian Andrzej Siewior <bigeasy@breakpoint.cc> CC: stable@kernel.org Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make headers_check' warnings: usr/include/asm-mn10300/setup.h:14: extern's make no sense in userspace usr/include/asm-mn10300/setup.h:15: extern's make no sense in userspace Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make headers_check' warning: usr/include/asm-mn10300/ptrace.h:80: extern's make no sense in userspace Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
由 David Howells 提交于
Fix interaction with new generic header stuff as added by: commit 6103ec56 Author: Arnd Bergmann <arnd@arndb.de> Date: Wed May 13 22:56:27 2009 +0000 asm-generic: add generic ABI headers The problem is that asm/signal.h has been made to include asm-generic/signal.h, but the redundant stuff from asm/signal.h has not been discarded, leading to multiple redefinitions. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 6月, 2009 12 次提交
-
-
由 Haavard Skinnemoen 提交于
The unaligned address exception handler (and others) does not scan the fixup tables before oopsing. This is bad because it means passing a badly aligned pointer from user space might crash the kernel. Fix this by scanning the fixup tables in _exception(). This should resolve the issue for unaligned addresses as well as other less common exceptions that might be happening during a userspace access. The page fault handler already does fixup processing. Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
由 Alan Stern 提交于
This patch (as1241) renames a bunch of functions in the PM core. Rather than go through a boring list of name changes, suffice it to say that in the end we have a bunch of pairs of functions: device_resume_noirq dpm_resume_noirq device_resume dpm_resume device_complete dpm_complete device_suspend_noirq dpm_suspend_noirq device_suspend dpm_suspend device_prepare dpm_prepare in which device_X does the X operation on a single device and dpm_X invokes device_X for all devices in the dpm_list. In addition, the old dpm_power_up and device_resume_noirq have been combined into a single function (dpm_resume_noirq). Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions of the former top-level device_suspend and device_resume routines. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Rename the functions performing "_noirq" dev_pm_ops operations from device_power_down() and device_power_up() to device_suspend_noirq() and device_resume_noirq(). The new function names are chosen to show that the functions are responsible for calling the _noirq() versions to finalize the suspend/resume operation. The current function names do not perform power down/up anymore so the names may be misleading. Global function renames: - device_power_down() -> device_suspend_noirq() - device_power_up() -> device_resume_noirq() Static function renames: - suspend_device_noirq() -> __device_suspend_noirq() - resume_device_noirq() -> __device_resume_noirq() Signed-off-by: NMagnus Damm <damm@igel.co.jp> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NLen Brown <lenb@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
This patch removes unused asm/suspend.h files for the following architectures: alpha, arm, ia64, m68k, mips, s390, um Signed-off-by: NMagnus Damm <damm@igel.co.jp> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
This is the last unification step. Here we do remove one of the files and rename the left one as cpu.c, as both are now the same. Also update power/Makefile, telling it to build cpu.o, instead of cpu_(32|64).o Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
In this step, we do unify the copyright notes for both files cpu_32.c and cpu_64.c, making such files exactly the same. It's the last step before the actual unification, that will rename one of them to cpu.c and remove the other one. Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
In this step we do unify cpu_32.c and cpu_64.c functions that work on restoring the saved processor state. Also, we do eliminate the forward declaration of fix_processor_context() for X86_64, as it's not needed anymore. Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
In this step we do unify cpu_32.c and cpu_64.c functions that work on saving the processor state. Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
Aiming total unification of cpu_32.c and cpu_64.c, in this step we do unify the global variables and existing forward declarations for such files. Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Sergio Luis 提交于
First step towards the unification of cpu_32.c and cpu_64.c. This commit unifies the headers of such files, making both of them use the same header files. It also remove the uneeded <module.h>. Signed-off-by: NSergio Luis <sergio@larces.uece.br> Signed-off-by: NLauro Salmito <laurosalmito@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Jaswinder Singh Rajput 提交于
One of the numbers in arch/x86/kernel/acpi/sleep.c is long, but it is not annotated appropriately, so sparese warns about it. Fix that. [rjw: added the changelog.] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Jean Delvare 提交于
fix ETIMEOUT -> ETIMEDOUT typos Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-