CPL_ABORT_REQ_RSS can come before TCP connection is established.  In
such case peer_abort was trying to remove the hwtid, which was not
inserted.  To avoid this we insert the hwtid when we are sure that we
are surely going to send passive accept request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Don't wakeup threads blocked in rdma_init/rdma_fini if we are on
MPAv2, and want to retry connection with MPAv1.

Stop ep-timer on getting MPA version mismatch, before doing the
abort_connection - in process_mpa_request.

Take care to stop ep-timer in error paths for process_mpa_request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Only reconnect if the endpoint wasn't freed.

peer_abort() should only attempt to reconnect if the endpoint wasn't
freed.  Also remove hwtid from the debugfs idr.

Add missing check for peer2peer in MPAv2 code

Use correct mpa version on reject.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The endpoint timeout logic had a race that could cause an endpoint
object to be freed while it was still on the timedout list.  This
can happen if the timer is stopped after it had fired, but before
the timedout thread processed the endpoint timeout.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With newer firmware, we can get streaming data due to connection
errors before the driver moves the QP out of RTS.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Log AEs even if the QP isn't in RTS.  It is useful information.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is currently releasing the last ref on the QP too early.
This can cause bus errors due to HW still fetching WRs from the HW
queue.  The fix is to keep a qp ref until we release the HW TID.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With later firmware, the chances of getting streaming mode data after
we exit RTS is likely, so we don't need to warn for it.  The only real
case where we don't expect it is when the QP is in RTS.

Move QP to ERROR when streaming mode data received.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If a FINI operation fails, then we need to ABORT instead of CLOSE.
Also, if we ABORT due to unexpected STREAMING data, then wake up
anybody blocked in FINI...
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This error means the RDMA connection was knocked out of RDMA mode,
probably due to an error on the connection.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Retries active opens for INUSE errors.

Logs any active ofld_connect_wr error replies.

Sends ofld_connect_wr on same ctrlq. It needs to go  on the same control txq as
regular CPL active/passive messages.

Retries on active open replies with EADDRINUSE.

Uses active open fw wr only if active filter region is set.

Adds stat for ofld_connect_wr failures.

This patch also adds debugfs file to show endpoints.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It establishes passive open connection through firmware work request. Passive
open connection will go through this path as now instead of listening server we
create a server filter which will redirect the incoming SYN packet to the
offload queue. After this driver tries to establish the connection using
firmware work request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It enables establishing active open connection using fw_ofld_connection work
request when cpl_act_open_rpl says TCAM full error which may be because
of LE hash collision. Current support is only for IPv4 active open connections.

Sets ntuple bits in active open requests. For T4 firmware greater than 1.4.10.0
ntuple bits are required to be set.

Adds nocong and enable_ecn module parameter options.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>

[ Move all FW return values to t4fw_api.h.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use WARN rather than printk followed by WARN_ON(1), for conciseness.

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression list es;
@@

-printk(
+WARN(1,
  es);
-WARN_ON(1);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

sparse correctly warns that if mpa->private_data_size is __be16, then
doing += on it is wrong, even if we do += htons(<something>) -- on a
little endian system, carries will go the wrong way.  Fix this up by
doing the addition in native byte order.
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when
rdma_connect() is called.  ip_dev_find() will return NULL, but pdev is
accessed anyway.

Checking that pdev is NULL and returning -ENODEV prevents the system
from crashing.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This allows dumping thousands of QPs.  Log active open failures of
interest.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use GFP_ATOMIC in _insert_handle() if ints are disabled.

Don't panic if we get an abort with no endpoint found.  Just log a
warning.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Log a warning and drop the abort message.  Otherwise we will do a
bogus wake_up() and crash.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This fixes a race where an ingress abort fails to wake up the thread
blocked in rdma_init() causing the app to hang.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Function import_ep() is incorrectly using ep->dst instead of the dst
ptr passed in.  This causes a crash when accepting new rdma connections
becase ep->dst is not initialized yet.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Don't worry about p2p_type if peer2peer itself is not requested in the
first place.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Now we must provide the IP destination address, and a reference has
to be dropped when we're done with the entry.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Three pieces of code do the same thing, create a l2t entry and then
import this information into the c4iw_ep object.

Create a helper function and call it from these 3 locations instead.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NRoland Dreier <roland@purestorage.com>

To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NRoland Dreier <roland@purestorage.com>

Commit f2c31e32 ("net: fix NULL dereferences in check_peer_redir()")
forgot to take care of infiniband uses of dst neighbours.

Many thanks to Marc Aurele who provided a nice bug report and feedback.
Reported-by: NMarc Aurele La France <tsi@ualberta.ca>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix logic so that we don't retry with MPAv1 once we have done that
already.  Otherwise, we end up retrying with MPAv1 even when its not
needed on getting peer aborts - and this could lead to kernel panic.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch adds support for Enhanced RDMA Connection Establishment
(draft-ietf-storm-mpa-peer-connect-06), aka MPAv2.  Details of draft
can be obtained from:
<http://www.ietf.org/id/draft-ietf-storm-mpa-peer-connect-06.txt>

The patch updates the following functions for initiator perspective:
 - send_mpa_request
 - process_mpa_reply
 - post_terminate for TERM error codes
 - destroy_qp for TERM related change
 - adds layer/etype/ecode to c4iw_qp_attrs for sending with TERM
 - peer_abort for retrying connection attempt with MPA_v1 message
 - added c4iw_reconnect function

The patch updates the following functions for responder perspective:
 - process_mpa_request
 - send_mpa_reply
 - c4iw_accept_cr
 - passes ird/ord to upper layers
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

dst_{get,set}_neighbour()
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- fix a race where the driver could end up sending a close_con_req
  after an abort_rpl.  In c4iw_ep_disconnect(), send abort or close
  request with the ep mutex held.

- fix a hang where driver fails to wake up when a connection is reset
  during a normal close.  Wake up any waiters in the interrupt path,
  and correctly cleanup after rdma_fini() failures.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver was never really waiting for RDMA_WR/FINI completions
because the condition variable used to determine if the completion
happened was never reset, and this condition variable is reused for
both connection setup and teardown.  This causes various driver
crashes under heavy loads due to releasing resources too early.

The fix is to use atomic bits to correctly reset the condition
immediately after the completion is detected.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Concurrent ingress CLOSE and ULP ABORT operations causes a crash due
to a race condition where the close path releases the EP lock and then
tries to move the QP state to CLOSED.  This must be done inside the EP
lock to avoid the race.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the ULP mode for initial RDMA connection setup to the proper DDP
mode.  This avoids wasting some HW resources while in streaming mode.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Set the default to on.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The idea here is this minimizes the number of places one has to edit
in order to make changes to how flows are defined and used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of on the stack.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This boolean state is now available in the flow flags.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since that is what the current vague "flags" argument means.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>