CPL_ABORT_REQ_RSS can come before TCP connection is established.  In
such case peer_abort was trying to remove the hwtid, which was not
inserted.  To avoid this we insert the hwtid when we are sure that we
are surely going to send passive accept request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Don't wakeup threads blocked in rdma_init/rdma_fini if we are on
MPAv2, and want to retry connection with MPAv1.

Stop ep-timer on getting MPA version mismatch, before doing the
abort_connection - in process_mpa_request.

Take care to stop ep-timer in error paths for process_mpa_request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Only reconnect if the endpoint wasn't freed.

peer_abort() should only attempt to reconnect if the endpoint wasn't
freed.  Also remove hwtid from the debugfs idr.

Add missing check for peer2peer in MPAv2 code

Use correct mpa version on reject.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The endpoint timeout logic had a race that could cause an endpoint
object to be freed while it was still on the timedout list.  This
can happen if the timer is stopped after it had fired, but before
the timedout thread processed the endpoint timeout.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With newer firmware, we can get streaming data due to connection
errors before the driver moves the QP out of RTS.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Log AEs even if the QP isn't in RTS.  It is useful information.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is currently releasing the last ref on the QP too early.
This can cause bus errors due to HW still fetching WRs from the HW
queue.  The fix is to keep a qp ref until we release the HW TID.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With later firmware, the chances of getting streaming mode data after
we exit RTS is likely, so we don't need to warn for it.  The only real
case where we don't expect it is when the QP is in RTS.

Move QP to ERROR when streaming mode data received.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If a FINI operation fails, then we need to ABORT instead of CLOSE.
Also, if we ABORT due to unexpected STREAMING data, then wake up
anybody blocked in FINI...
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This error means the RDMA connection was knocked out of RDMA mode,
probably due to an error on the connection.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Nchas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMatthew Daley <mattjd@gmail.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes up

commit e8e89622
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 18 22:25:11 2012 +0100

    drm/ttm: fix fence locking in ttm_buffer_object_transfer

which leaves behind a might_sleep in atomic context, since the
fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix
is to revert the above commit and only take the lock where we need it,
around the call to ->sync_obj_ref.

v2: Fixup things noticed by Maarten Lankhorst:
- Brown paper bag locking bug.
- No need for kzalloc if we clear the entire thing on the next line.
- check for bo->sync_obj (totally unlikely race, but still someone
  else could have snuck in) and clear fbo->sync_obj if it's cleared
  already.
Reported-by: NDave Airlie <airlied@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Don't access uninitialized work-queue when removing device.
The work queue is initialized only if the device multi-queue.
So don't call cancel_work unless this is a multi-queue device.

This fixes the following panic:

Kernel panic - not syncing: BUG!
Call Trace:
62031b28:  [<6026085d>] panic+0x16b/0x2d3
62031b30:  [<6004ef5e>] flush_work+0x0/0x1d7
62031b60:  [<602606f2>] panic+0x0/0x2d3
62031b68:  [<600333b0>] memcpy+0x0/0x140
62031b80:  [<6002d58a>] unblock_signals+0x0/0x84
62031ba0:  [<602609c5>] printk+0x0/0xa0
62031bd8:  [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148
62031c10:  [<6004ef5e>] flush_work+0x0/0x1d7
62031c18:  [<60050234>] try_to_grab_pending+0x0/0x17e
62031c38:  [<6004e984>] get_work_gcwq+0x71/0x8f
62031c48:  [<60050539>] __cancel_work_timer+0x5b/0x115
62031c78:  [<628acc85>] unplug_port+0x0/0x191 [virtio_console]
62031c98:  [<6005061c>] cancel_work_sync+0x12/0x14
62031ca8:  [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console]
62031ce8:  [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio]
62031d08:  [<601cf242>] __device_release_driver+0x75/0xe4
62031d28:  [<601cf2dd>] device_release_driver+0x2c/0x40
62031d48:  [<601ce0dd>] driver_unbind+0x7d/0xc6
62031d88:  [<601cd5d9>] drv_attr_store+0x27/0x29
62031d98:  [<60115f61>] sysfs_write_file+0x100/0x14d
62031df8:  [<600b737d>] vfs_write+0xcb/0x184
62031e08:  [<600b58b8>] filp_close+0x88/0x94
62031e38:  [<600b7686>] sys_write+0x59/0x88
62031e88:  [<6001ced1>] handle_syscall+0x5d/0x80
62031ea8:  [<60030a74>] userspace+0x405/0x531
62031f08:  [<600d32cc>] sys_dup+0x0/0x5e
62031f28:  [<601b11d6>] strcpy+0x0/0x18
62031f38:  [<600be46c>] do_execve+0x10/0x12
62031f48:  [<600184c7>] run_init_process+0x43/0x45
62031fd8:  [<60019a91>] new_thread_handler+0xba/0xbc
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Cc: stable@kernel.org
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Adding new class/subclass/protocol combinations based on the GPLed
out-of-tree Huawei driver. One of these has already appeared on a
device labelled as "E320".
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding a new vendor specific class/subclass/protocol combination
for CDC NCM devices based on information from a GPLed out-of-tree
driver from Huawei.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible that the call to xen_allocate_irq_dynamic() returns negative
number other than -1.
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).

This is CVE-2013-0231 / XSA-43.

Also make the two messages uniform in both their wording and severity.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Commit 1fb9fed6 ("IB/qib: Fix QP RCU sparse warning") broke QP
hash list deletion in qp_remove() badly.

This patch restores the former for loop behavior, while still fixing
the sparse warnings.

Cc: <stable@vger.kernel.org>
Reviewed-by: NGary Leshner <gary.s.leshner@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 08ff3235 ("mlx4: 64-byte CQE/EQE support") introduced a
regression where older guest VF drivers failed to load even when
64-byte EQEs/CQEs are disabled, since the PF wrongly advertises the
new context behaviour anyway.  The failure looks like:

    mlx4_core 0000:00:07.0: Unknown pf context behaviour
    mlx4_core 0000:00:07.0: Failed to obtain slave caps
    mlx4_core: probe of 0000:00:07.0 failed with error -38

Fix this by basing this advertisement on dev->caps.flags, which is the
operational capabilities used by the QUERY_FUNC_CAP command wrapper
(dev_cap->flags holds the firmware capabilities).
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

After commit b13912bb ("IPoIB: Call skb_dst_drop() once skb is
enqueued for sending"), using connected mode and running multithreaded
iperf for long time, ie

    iperf -c <IP> -P 16 -t 3600

results in a crash.

After the above-mentioned patch, the driver is calling skb_orphan() and
skb_dst_drop() after calling post_send() in ipoib_cm.c::ipoib_cm_send()
(also in ipoib_ib.c::ipoib_send())

The problem with this is, as is written in a comment in both routines,
"it's entirely possible that the completion handler will run before we
execute anything after the post_send()."  This leads to running the
skb cleanup routines simultaneously in two different contexts.

The solution is to always perform the skb_orphan() and skb_dst_drop()
before queueing the send work request.  If an error occurs, then it
will be no different than the regular case where dev_free_skb_any() in
the completion path, which is assumed to be after these two routines.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

the default of_gpio_simple_xlate() will make us fail while getting gpios
bigger than 32 by of_get_named_gpio() or related APIs.
this patch adds a specific of_xlate callback for sirf gpio_chip and fix
the problem.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since pinctrl-exynos can support exynos4 and exynos5 so changed
the option name to PINCTRL_EXYNOS for more clarity.

Cc: Thomas Abraham <Thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The RTC control register should be enabled in the process of
initializing.

Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC.  The
register mapping section in RTC is always read as zero.  So I doubt that
ST guys may already enable this register in bootloader.  So they won't
meet this issue.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.
Signed-off-by: NJan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The year field is incorrectly masked when setting the date.  If the year
is beyond 2099, the year field will be incorrectly updated in hardware.

This patch masks the year field correctly.
Signed-off-by: NEdgar Toernig <froese@gmx.de>
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch addresses a long standing issue of the driver with the
mac80211 .flush() callback. Since implementing the .flush() callback
a number of issues have been fixed, but a WARN_ON_ONCE() was still
triggered because the timeout on the flush could still occur.

This patch changes the awkward design using msleep() into one using
a waitqueue. The waiting flush() context will kick the transmit dma
when it is idle and the timeout used waiting for the event is set
to 500 ms. Worst case there can be 64 frames outstanding for transmit
in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming
MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also
removed as this was put in to indicate the flush timeout as a reason
for the driver to stall. That was not happening since fixing endless
AMPDU retries with following upstream commit:

commit 85091fc0
Author: Arend van Spriel <arend@broadcom.com>
Date:   Thu Feb 23 18:38:22 2012 +0100

    brcm80211: smac: fix endless retry of A-MPDU transmissions

bugzilla: 42840 <https://bugzilla.kernel.org/show_bug.cgi?id=42840>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=799168>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=787649>

Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Camaleón <noelamac@gmail.com>
Cc: Milan Bouchet-Valat <nalimilan@club-internet.fr>
Cc: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NHante Meuleman <meuleman@broadcom.com>
Reviewed-by: NPiotr Haber <phaber@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Acked-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch unregisters the gpio chip before ssb gets unloaded.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch unregisters the gpio chip before bcma gets unloaded.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reported-by: NPiotr Haber <phaber@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Kernel commits 41affd52 and 6539306b changed the locking in rtl_lps_leave()
from a spinlock to a mutex by doing the calls indirectly from a work queue
to reduce the time that interrupts were disabled. This change was fine for
most systems; however a scheduling while atomic bug was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates
that routine rtl_is_special(), which calls rtl_lps_leave() in three places
was entered in atomic context. These direct calls are replaced by putting a
request on the appropriate work queue.
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: NNathaniel Doherty <ntdoherty@gmail.com>
Cc: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

1. Optimize the match rules with new macro for Huawei USB storage devices,
   to avoid to load USB storage driver for the modem interface
   with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Define a new macro for USB storage match rules:
    matching with Vendor ID and interface descriptors.
Signed-off-by: Nfangxiaozhi <huananhu@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It is normal for minidrivers accumulating frames to return NULL
from their tx_fixup function. We do not want to count this as a
drop, or log any debug messages.  A different exit path is
therefore chosen for such drivers, skipping the debug message
and the tx_dropped increment.

The test for accumulating drivers was however completely bogus,
making the exit path selection depend on whether the user had
enabled tx_err logging or not. This would arbitrarily mess up
accounting for both accumulating and non-accumulating minidrivers,
and would result in unwanted debug messages for the accumulating
drivers.

Fix by testing for FLAG_MULTI_PACKET instead, which probably was
the intention from the beginning.  This usage match the documented
behaviour of this flag:

 Indicates to usbnet, that USB driver accumulates multiple IP packets.
 Affects statistic (counters) and short packet handling.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) rhine_tx() should use dev_kfree_skb() not dev_kfree_skb_irq()

2) rhine_slow_event_task's NAPI triggering logic is racey, it
   should just hit the interrupt mask register.  This is the
   same as commit 7dbb4918
   ("r8169: avoid NAPI scheduling delay.") made to fix the same
   problem in the r8169 driver.  From Francois Romieu.
Reported-by: NJamie Gloudon <jamie.gloudon@gmail.com>
Tested-by: NJamie Gloudon <jamie.gloudon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for Zolix Omni 1509 monochromator custom USB-RS232 converter.
Signed-off-by: NPetr Kubánek <petr@kubanek.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

New device with 3 serial interfaces:

 If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend) Sub=ff Prot=ff
 If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 3 Alt= 0 #EPs= 2 Cls=08(stor) Sub=06 Prot=50

Cc: <stable@vger.kernel.org>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add PID/VID entries for ELV WS 300 PC II weather station
Signed-off-by: NSven Killig <sven@killig.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>