- 20 4月, 2006 24 次提交
-
-
由 Michael Buesch 提交于
This cleans up the bcm43xx sysfs code and makes it compliant with the unwritten sysfs rules (at least I hope so). Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes coverity bug: http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adrian Bunk 提交于
This patch fixes a memory leak spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Use "depends on" to make all bcm43xx driver options be listed at the same level. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Fix printk format warnings: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’ Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Symbol firmware F3.91-71 has an additional word in the commsquality RID. Extend the receiving buffer by one word to accomodate it. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jean Tourrilhes 提交于
2.6.17-rc1 changed the title for the entry CONFIG_NET_RADIO. I personally disagree with this change and want it reverted. Patch for 2.6.17-rc1. Rationale : WIRELESS_EXT is an invisible option. Therefore, the only way for a user to enable it is via NET_RADIO. Some users need to do that for out-of-tree drivers. Therefore it should be mentionned in the title of the option. Rationale2 : the option just below is called "Wireless Extension API over RtNetlink". Some users may confuse this option for the main "Wireless Extension" option. Therefore reverting this change help disambiguate the relation between those two options. Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Send scan completion events to user space when a scan completes. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Airo firmware versions >= 5.30.17 send re-association events to the driver that are currently unrecognized, causing spurious disassociation events to be sent to user space. Loss of sync due to scan requests also results in disassociation events sent to user space. This patch traps those two events; suppressing sync-loss on scan, and sending the correct association event on re-association notifications. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Antonino A. Daplas 提交于
Fix return code of fb_write(): If at least 1 byte was transferred to the device, return number of bytes, otherwise: - return -EFBIG - if file offset is past the maximum allowable offset or size is greater than framebuffer length - return -ENOSPC - if size is greater than framebuffer length - offset Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix modpost section mismatch warnings in savagefb driver: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Marking radeon_pci_register() as __devinit clears up all section mismatch warnings that are caused by radeon_pci_register() calling various __devinit function. Is there some reason not to do this? WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jean Delvare 提交于
Fix the following section mismatch: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2) Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAI.HSU 提交于
From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anatoli Antonovitch 提交于
Add support for the IDE device on ATI SB600 Signed-off-by: NFelix Kuehling <fkuehlin@ati.com> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Engelhardt 提交于
The wording of two messages in drivers/pnp/manager.c is incorrect. Fix that. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy.Dunlap 提交于
From: Randy Dunlap <rdunlap@xenotime.net> Fix all modpost section mismatch warnings in parport_pc: WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x230) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x283) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x3e6) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x400) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x463) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x488) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:superios from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x54c) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x56a) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x67) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x9f) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0xa7) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:cards from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x132) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x142) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heikki Orsila 提交于
I was looking into random driver code and found a suspicious looking memcpy() in drivers/char/ipmi/ipmi_bt_sm.c on 2.6.17-rc1: if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH)) return -1; ... memcpy(bt->write_data + 3, data + 1, size - 1); where sizeof bt->write_data is IPMI_MAX_MSG_LENGTH. It looks like the memcpy would overflow by 2 bytes if size == IPMI_MAX_MSG_LENGTH. A patch attached to limit size to (IPMI_MAX_LENGTH - 2). Cc: Corey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
gcc complains about __devinit in the wrong location: drivers/char/ipmi/ipmi_si_intf.c:2205: warning: '__section__' attribute does not apply to types Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dipankar Sarma 提交于
There are places in the kernel where we look up files in fd tables and access the file structure without holding refereces to the file. So, we need special care to avoid the race between looking up files in the fd table and tearing down of the file in another CPU. Otherwise, one might see a NULL f_dentry or such torn down version of the file. This patch fixes those special places where such a race may happen. Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com> Acked-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
/project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c: In function 'm32r_sio_console_write': /project/m32r-linux/kernel/linux-2.6.17-rc1-mm2/linux-2.6.17-rc1-mm2/drivers/serial/m32r_sio.c:1060: warning: unused variable 'i' Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Barksdale 提交于
Fix the bitmasks used when writing to the M41T00 registers. The original code used a mask of 0x7f when writing to each register, this is incorrect and probably the result of a copy-paste error. As a result years from 1980 to 1999 will be read back as 2000 to 2019. Signed-off-by: NDavid Barksdale <amatus@ocgnet.org> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 4月, 2006 3 次提交
-
-
由 Adrian Bunk 提交于
This patch removes the EXPORT_SYMBOL_GPL of the static function cpufreq_parse_governor(). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Thomas Renninger 提交于
[CPUFREQ] If max_freq got reduced (e.g. by _PPC) a write to sysfs scaling_governor let cpufreq core stuck at low max_freq for ever The previous patch had bugs (locking and refcount). This one could also be related to the latest DELL reports. But they only slip into this if a user prog (e.g. powersave daemon does when AC got (un) plugged due to a scheme change) echos something to /sys/../cpufreq/scaling_governor while the frequencies got limited by BIOS. This one works: Subject: Max freq stucks at low freq if reduced by _PPC and sysfs gov access The problem is reproducable by(if machine is limiting freqs via BIOS): - Unplugging AC -> max freq gets limited - echo ${governor} >/sys/.../cpufreq/scaling_governor (policy->user_data.max gets overridden with policy->max and will never come up again.) This patch exchanged the cpufreq_set_policy call to __cpufreq_set_policy and duplicated it's functionality but did not override user_data.max. The same happens with overridding min/max values. If freqs are limited and you override the min freq value, the max freq global value will also get stuck to the limited freq, even if BIOS allows all freqs again. Last scenario does only happen if BIOS does not reduce the frequency to the lowest value (should never happen, just for correctness...) drivers/cpufreq/cpufreq.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-) Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: N"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Move platform_scoop_config from the SharpSL scoop PCMCIA driver to the SCOOP driver. This avoids build failures when PCMCIA is not built or is modular (scoop.c itself cannot be modular). Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 4月, 2006 4 次提交
-
-
由 Jayachandran C 提交于
Fix de-reference of 'dev_priv' before NULL check. Signed-off-by: NJayachandran C. <c.jayachandran@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Adrian Bunk 提交于
- #if 0 the following unused global function: - drm_ioremap_nocache() - make the following needlessly global functions static: - agp_remap() - drm_lookup_map() Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Mike Miller 提交于
Fix a crash when running hpacucli with multiple logical volumes on a cciss controller. We were not properly initializing the disk->queue and causing a fault. Thanks to Hasso Tepper for reporting the problem. Thanks to Steve Cameron for root causing the problem. Most of the patch just moves things around. The fix is a one-liner. Signed-off-by: NMike Miller <mike.miller@hp.com> Signed-off-by: NStephen Cameron <steve.cameron@hp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE are set to (y, m) since isd200 calls ide_fix_driveid() in the BLK_DEV_IDE code. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 4月, 2006 9 次提交
-
-
由 David Brownell 提交于
The at91_cf driver got out of sync with certain changes in the PCMCIA layer, notably getting rid of some duplication of data ... causing the version merged to kernel.org to fail compiling. This patch gives the at91_cf platform device a new iomem resource, using it so this new pcmcia scheme works. It also cleans up some whitepsace bugs that have accumulated over time (mostly too-long lines). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 H. Peter Anvin 提交于
Original patch by Benjamin Herrenschmidt after debugging by Brian Hinz. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Hinz <bphinz@hotmail.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Walleij 提交于
From: Linus Walleij <triad@df.lth.se> This patch enables support for ALi ISA bridges when we run the smcinit code. It is needed to properly configure some Toshiba laptops. Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
In the STIR421x case, when the firmware upload fails, we need to unregister_netdev. Otherwise we hit a BUG on free_netdev(), if sysfs is enabled. Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Bottomley 提交于
Any end device that can't support any of the scanning protocols shouldn't be scanned, so set its id to -1 to prevent scsi_scan_target() being called for it. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jean Delvare 提交于
The Asus A6VA notebook was reported to need a PCI quirk to unhide the SMBus. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John Rose 提交于
The init function for the RPA PCI Hotplug driver returns -ENODEV in the case that no hotplug-capable slots are detected in the system. This is bad, since hot-capable slots can be added after boot to a purely virtual POWER partition. This is also bad because DLPAR I/O operations depend on the rpaphp module. Change the rpaphp init module to return success for the case of partitions that own no hotplug-capable slots at boot. Such slots can be dynamically added after boot. Signed-off-by: NJohn Rose <johnrose@austin.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 John W. Linville 提交于
The naming of the constant defined for PCI ID 1022:7450 does not seem to match the information at http://pciids.sourceforge.net/: http://pci-ids.ucw.cz/iii/?i=1022 There 1022:7450 is listed as "AMD-8131 PCI-X Bridge" while 1022:7451 is listed as "AMD-8131 PCI-X IOAPIC". Yet, the current definition for 0x7450 is PCI_DEVICE_ID_AMD_8131_APIC. It seems to me like that name should map to 0x7451, while a name like PCI_DEVICE_ID_AMD_8131_BRIDGE should map to 0x7450. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Shaohua Li 提交于
Add MSI(X) configure sapce save/restore in generic PCI helper. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-