Fix AT91RM9200 build breakage

The at91_cf driver got out of sync with certain changes in the PCMCIA
layer, notably getting rid of some duplication of data ... causing the
version merged to kernel.org to fail compiling.

This patch gives the at91_cf platform device a new iomem resource, using
it so this new pcmcia scheme works.  It also cleans up some whitepsace
bugs that have accumulated over time (mostly too-long lines).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/arm/mach-at91rm9200/devices.c

@@ -194,13 +194,23 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 static struct at91_cf_data cf_data;
 
+static struct resource at91_cf_resources[] = {
+	[0] = {
+		.start	= AT91_CF_BASE,
+		/* ties up CS4, CS5, and CS6 */
+		.end	= AT91_CF_BASE + (0x30000000 - 1),
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	},
+};
+
 static struct platform_device at91rm9200_cf_device = {
 	.name		= "at91_cf",
 	.id		= -1,
 	.dev		= {
 				.platform_data		= &cf_data,
 	},
-	.num_resources	= 0,
+	.resource	= at91_cf_resources,
+	.num_resources	= ARRAY_SIZE(at91_cf_resources),
 };
 
 void __init at91_add_device_cf(struct at91_cf_data *data)

drivers/pcmcia/at91_cf.c

@@ -28,8 +28,6 @@
 #include <asm/arch/gpio.h>
 
 
-#define	CF_SIZE		0x30000000	/* CS5+CS6: unavailable */
-
 /*
  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
  * some other bit in {A24,A22..A11} is nREG to flag memory access
@@ -76,7 +74,8 @@ static irqreturn_t at91_cf_irq(int irq, void *_cf, struct pt_regs *r)
 		/* kick pccard as needed */
 		if (present != cf->present) {
 			cf->present = present;
-			pr_debug("%s: card %s\n", driver_name, present ? "present" : "gone");
+			pr_debug("%s: card %s\n", driver_name,
+					present ? "present" : "gone");
 			pcmcia_parse_events(&cf->socket, SS_DETECT);
 		}
 	}
@@ -93,7 +92,7 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 
 	cf = container_of(s, struct at91_cf_socket, socket);
 
-	/* NOTE: we assume 3VCARD, not XVCARD...  */
+	/* NOTE: CF is always 3VCARD */
 	if (at91_cf_present(cf)) {
 		int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */
 		int vcc	= cf->board->vcc_pin;
@@ -109,7 +108,8 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 	return 0;
 }
 
-static int at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
+static int
+at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 {
 	struct at91_cf_socket	*cf;
 
@@ -184,7 +184,8 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 }
 
 /* pcmcia layer maps/unmaps mem regions */
-static int at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
+static int
+at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
 {
 	struct at91_cf_socket	*cf;
 
@@ -218,12 +219,17 @@ static int __init at91_cf_probe(struct device *dev)
 	struct at91_cf_socket	*cf;
 	struct at91_cf_data	*board = dev->platform_data;
 	struct platform_device	*pdev = to_platform_device(dev);
+	struct resource		*io;
 	unsigned int		csa;
 	int			status;
 
 	if (!board || !board->det_pin || !board->rst_pin)
 		return -ENODEV;
 
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -ENODEV;
+
 	cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -250,10 +256,14 @@ static int __init at91_cf_probe(struct device *dev)
 	 * REVISIT:  these timings are in terms of MCK cycles, so
 	 * when MCK changes (cpufreq etc) so must these values...
 	 */
-	at91_sys_write(AT91_SMC_CSR(4), AT91_SMC_ACSS_STD | AT91_SMC_DBW_16 | AT91_SMC_BAT | AT91_SMC_WSEN
-				| AT91_SMC_NWS_(32)		/* wait states */
-				| AT91_SMC_RWSETUP_(6)		/* setup time */
-				| AT91_SMC_RWHOLD_(4)		/* hold time */
+	at91_sys_write(AT91_SMC_CSR(4),
+				  AT91_SMC_ACSS_STD
+				| AT91_SMC_DBW_16
+				| AT91_SMC_BAT
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(32)	/* wait states */
+				| AT91_SMC_RWSETUP_(6)	/* setup time */
+				| AT91_SMC_RWHOLD_(4)	/* hold time */
 	);
 
 	/* must be a GPIO; ergo must trigger on both edges */
@@ -274,8 +284,7 @@ static int __init at91_cf_probe(struct device *dev)
 		if (status < 0)
 			goto fail0a;
 		cf->socket.pci_irq = board->irq_pin;
-	}
-	else
+	} else
 		cf->socket.pci_irq = NR_IRQS + 1;
 
 	/* pcmcia layer only remaps "real" memory not iospace */
@@ -284,7 +293,8 @@ static int __init at91_cf_probe(struct device *dev)
 		goto fail1;
 
 	/* reserve CS4, CS5, and CS6 regions; but use just CS4 */
-	if (!request_mem_region(AT91_CF_BASE, CF_SIZE, driver_name))
+	if (!request_mem_region(io->start, io->end + 1 - io->start,
+				driver_name))
 		goto fail1;
 
 	pr_info("%s: irqs det #%d, io #%d\n", driver_name,
@@ -297,7 +307,7 @@ static int __init at91_cf_probe(struct device *dev)
 	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
 				| SS_CAP_MEM_ALIGN;
 	cf->socket.map_size = SZ_2K;
-	cf->socket.io[0].NumPorts = SZ_2K;
+	cf->socket.io[0].res = io;
 
 	status = pcmcia_register_socket(&cf->socket);
 	if (status < 0)
@@ -307,7 +317,7 @@ static int __init at91_cf_probe(struct device *dev)
 
 fail2:
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 fail1:
 	if (board->irq_pin)
 		free_irq(board->irq_pin, cf);
@@ -321,14 +331,15 @@ static int __init at91_cf_probe(struct device *dev)
 
 static int __exit at91_cf_remove(struct device *dev)
 {
-	struct at91_cf_socket *cf = dev_get_drvdata(dev);
-	unsigned int csa;
+	struct at91_cf_socket	*cf = dev_get_drvdata(dev);
+	struct resource		*io = cf->socket.io[0].res;
+	unsigned int		csa;
 
 	pcmcia_unregister_socket(&cf->socket);
 	free_irq(cf->board->irq_pin, cf);
 	free_irq(cf->board->det_pin, cf);
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 
 	csa = at91_sys_read(AT91_EBI_CSA);
 	at91_sys_write(AT91_EBI_CSA, csa & ~AT91_EBI_CS4A);
@@ -342,8 +353,8 @@ static struct device_driver at91_cf_driver = {
 	.bus		= &platform_bus_type,
 	.probe		= at91_cf_probe,
 	.remove		= __exit_p(at91_cf_remove),
-	.suspend 	= pcmcia_socket_dev_suspend,
-	.resume 	= pcmcia_socket_dev_resume,
+	.suspend	= pcmcia_socket_dev_suspend,
+	.resume		= pcmcia_socket_dev_resume,
 };
 
 /*--------------------------------------------------------------------------*/