- 09 5月, 2012 2 次提交
-
-
由 Peter Ujfalusi 提交于
If dtb is provided the needed device will be created dynamically. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Peter Ujfalusi 提交于
If dtb is provided the needed device will be created dynamically. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 18 4月, 2012 1 次提交
-
-
由 Paul Walmsley 提交于
Resolve some warnings identified by cppcheck in arch/arm/mach-omap2: [arch/arm/mach-omap2/usb-tusb6010.c:129]: (style) Checking if unsigned variable 'tmp' is less than zero. [arch/arm/mach-omap2/prm_common.c:241]: (error) Possible null pointer dereference: irq_setup - otherwise it is redundant to check if irq_setup is null at line 247 [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'per_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:790]: (style) Variable 'core_clkdm' is assigned a value that is never used [arch/arm/mach-omap2/pm24xx.c:185]: (style) Variable 'only_idle' is assigned a value that is never used [arch/arm/mach-omap2/mux.c:254]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/mux.c:258]: (error) Possible null pointer dereference: mux [arch/arm/mach-omap2/gpmc-onenand.c:178]: (style) Variable 'tick_ns' is assigned a value that is never used [arch/arm/mach-omap2/gpio.c:56]: (error) Possible null pointer dereference: pdata - otherwise it is redundant to check if pdata is null at line 57 [arch/arm/mach-omap2/devices.c:45]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/board-omap3evm.c:641] -> [arch/arm/mach-omap2/board-omap3evm.c:639]: (style) Found duplicate branches for if and else. [arch/arm/mach-omap2/am35xx-emac.c:95]: (style) Variable 'regval' is assigned a value that is never used [arch/arm/mach-omap2/devices.c:74]: (style) Variable 'l' is assigned a value that is never used [arch/arm/mach-omap2/pm34xx.c:277]: (style) Variable 'per_prev_state' is assigned a value that is never used [arch/arm/plat-omap/dmtimer.c:352]: (error) Possible null pointer dereference: timer - otherwise it is redundant to check if timer is null at line 354 [arch/arm/plat-omap/omap_device.c:478]: (style) Variable 'c' is assigned a value that is never used [arch/arm/plat-omap/usb.c:42]: (style) Variable 'status' is assigned a value that is never used [arch/arm/mach-omap1/clock.c:197]: (style) Variable 'dpll1_rate' is assigned a value that is never used [arch/arm/mach-omap1/lcd_dma.c:60]: (style) struct or union member 'lcd_dma_info::size' is never used [arch/arm/mach-omap1/pm.c:572]: (style) Variable 'entry' is assigned a value that is never used Some of them are pretty good catches, such as gpio.c:56 and usb-tusb6010.c:129. Thanks to Jarkko Nikula for some comments on the sscanf() warnings. It seems that the kernel sscanf() ignores the field width anyway for the %d format, so those changes have been dropped from this second version. Thanks to Daniel Marjamäki <daniel.marjamaki@gmail.com> for pointing out that a variable was unnecessarily marked static in the board-omap3evm.c change. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Charulatha Varadarajan <charu@ti.com> Cc: Daniel Marjamäki <daniel.marjamaki@gmail.com> Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com> Reviewed-by: Charulatha Varadarajan <charu@ti.com> # for gpio.c
-
- 17 3月, 2012 1 次提交
-
-
由 Felipe Balbi 提交于
This patch allows us to drop the OMAP dependency from the OMAP4 keypad driver. Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NSourav Poddar <sourav.poddar@ti.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 12 3月, 2012 2 次提交
-
-
由 Benoit Cousson 提交于
Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: NRob Herring <rob.herring@calxeda.com>
-
由 Peter Ujfalusi 提交于
The driver for omap-mcbsp-dai no longer exist since it has been merged with the omap-mcbsp driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Tested-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NLiam Girdwood <lrg@ti.com>
-
- 25 2月, 2012 2 次提交
-
-
由 Kevin Hilman 提交于
Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 24 2月, 2012 1 次提交
-
-
由 Tony Lindgren 提交于
If CONFIG_SOC_OMAP3430 is not set and CONFIG_HDQ_MASTER_OMAP is selected for w1 driver we get the following error: arch/arm/mach-omap2/devices.c:662:13: error: 'OMAP_HDQ_BASE' undeclared here (not in a function) Looks like OMAP_HDQ_BASE is valid for all omaps except 2420, so we can remove the ifdef and not register the device on 2420. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Julia Lawall 提交于
pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 16 1月, 2012 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
omap3isp depends on CONFIG_IOMMU_API, so avoid registering its device (and defining its configuration structs) on !CONFIG_IOMMU_API. This is generally nice to have, but more importantly, it fixes: arch/arm/plat-omap/include/plat/iommu.h: In function 'dev_to_omap_iommu': arch/arm/plat-omap/include/plat/iommu.h:135: error: 'struct dev_archdata' has no member named 'iommu' arch/arm/mach-omap2/devices.c: In function 'omap3_init_camera': arch/arm/mach-omap2/devices.c:222: error: 'struct dev_archdata' has no member named 'iommu' make[1]: *** [arch/arm/mach-omap2/devices.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Which happens because while setting up the omap3isp device we try to access the (now nonexistent) iommu member of dev_archdata. Compile tested with omap2plus_defconfig on today's: commit e343a895 Merge: 06792c4d 193a667f Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Tue Jan 10 18:04:27 2012 -0800 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostReported-by: NGovindraj Raja <govindraj.raja@ti.com> Reported-by: NArik Nemtsov <arik@wizery.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
- 14 12月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
Add platform device registration for OMAP4 DMIC. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 05 12月, 2011 1 次提交
-
-
由 Ohad Ben-Cohen 提交于
Bind OMAP3's isp device to the isp's dedicated iommu, by setting the device's archdata iommu member. This way omap3isp will be able to use the generic IOMMU API without having to call any omap-specific binding method. Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 05 11月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
Commit f718e2c0 (ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures) removed these structures. Commit 3528c58e (OMAP: omap_device: when building return platform_device instead of omap_device) now returns platform_device instead of omap_device. Fix up the omap-mcpdm init function since this part comes via sound tree, and there has been changes regarding to hwmod/omap_device_build. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> CC: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@ti.com> [tony@atomide.com: updated comments] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 05 10月, 2011 2 次提交
-
-
由 Benoit Cousson 提交于
Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
由 Benoit Cousson 提交于
Remove all these duplicated structures since a default one is now available. Signed-off-by: NBenoit Cousson <b-cousson@ti.com> Signed-off-by: NKevin Hilman <khilman@ti.com>
-
- 22 9月, 2011 1 次提交
-
-
由 Peter Ujfalusi 提交于
McPDM device is converted to omap device. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Jorge Eduardo Candelaria Signed-off-by: Margarita Olaya Cabrera Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMisael Lopez Cruz <misael.lopez@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 16 9月, 2011 1 次提交
-
-
由 Kevin Hilman 提交于
All of the device init and device driver interaction with omap_device is done using platform_device pointers. To make this more explicit, have omap_device return a platform_device pointer instead of an omap_device pointer. All current users of the omap_device pointer were only using it to get at the platform_device pointer or struct device pointer, so fixing all of the users was trivial. This also makes it more difficult for device init code to directly access members of struct omap_device, and allows for easier changing of omap_device internals. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@ti.com>
-
- 08 8月, 2011 1 次提交
-
-
由 Russell King 提交于
Convert arch/arm includes of mach/gpio.h and asm/gpio.h to linux/gpio.h before we start consolidating the individual platform implementations of the gpio header files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 7月, 2011 1 次提交
-
-
由 Shubhrajyoti Datta 提交于
The mux settings for keypad are done for omap4430sdp in board file. Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> [tony@atomide.com: improved formatting a bit] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 01 6月, 2011 1 次提交
-
-
由 Rabin Vincent 提交于
Don't PTR_ERR() a non-error pointer: initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs initcall omap4_l3_init+0x0/0xdc returned with error code -544980480 Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 22 3月, 2011 4 次提交
-
-
由 Sergio Aguirre 提交于
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by: NSergio Aguirre <saaguirre@ti.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Laurent Pinchart 提交于
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sergio Aguirre 提交于
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by: NSergio Aguirre <saaguirre@ti.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tuukka Toivonen 提交于
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by: NTuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: NVimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 3月, 2011 1 次提交
-
-
由 Aaro Koskinen 提交于
Fix the return value for the successful case. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 09 3月, 2011 2 次提交
-
-
由 sricharan 提交于
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod data base. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nsricharan <r.sricharan@ti.com> Acked-by: NBenoit Cousson <b-cousson@ti.com>
-
由 sricharan 提交于
The l3 interconnect device is build with all the data required to handle the error logging. The data is extracted from the hwmod database. Signed-off-by: Nsricharan <r.sricharan@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NBenoit Cousson <b-cousson@ti.com>
-
- 02 3月, 2011 3 次提交
-
-
由 Kishore Kadiyala 提交于
OMAP2420 platform consists of mmc block as in omap1 and not the hsmmc block as present in omap2430, omap3, omap4 platforms. Removing all base address macro defines except keeping one for OMAP2420 and adapting only hsmmc device registration and driver to hwmod framework. Changes involves: 1) Remove controller reset in devices.c which is taken care of by hwmod framework. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute. 3) Update the driver to use dev_attr to find whether controller supports dual volt cards Signed-off-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NKishore Kadiyala <kishore.kadiyala@ti.com> Reviewed-by: NBalaji T K <balajitk@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> CC: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kishore Kadiyala 提交于
Moving the definition of mux setting API from devices.c to hsmmc.c and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux". Also calling "omap_hsmmc_mux" from omap2_hsmmc_init. Signed-off-by: NKishore Kadiyala <kishore.kadiyala@ti.com> Cc: Chris Ball <cjb@laptop.org Cc: Tony Lindgren <tony@atomide.com Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Anand Gadiyar 提交于
The MMC controller on the OMAP2420 is different from those on the OMAP2430, OMAP3 and OMAP4 families - all of the latter are identical. The one on the OMAP2420 is closer to that on OMAP1 chips. Currently, the n8x0 is the only OMAP2420 platform supported in mainline which registers the MMC controller. Upcoming changes to register the controllers using hwmod data are potentially invasive. To reduce the risk, separate out the 2420 controller registration from the common init function and update its only user. Also seperating out mux settings for OMAP2420. Signed-off-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NKishore Kadiyala <kishore.kadiyala@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 25 2月, 2011 1 次提交
-
-
由 Felipe Contreras 提交于
Remove static platform_device and resource data within omap mailbox driver; use the one defined in the hwmod database along with omap_device framework for device build and registration. Add device latency functions to be used, so clock can be enabled and sysconfig is configured. Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NOmar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 18 2月, 2011 2 次提交
-
-
由 Syed Rafiuddin 提交于
-Add the platform changes for the keypad driver -Register keyboard device with hwmod framework. Signed-off-by: NSyed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: NAbraham Arce <x0066660@ti.com> Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Charulatha V 提交于
Cleans up all base address definitions for omap_mcspi and adapts the device registration and driver to hwmod framework. Changes involves: 1) Removing all base address macro defines. 2) Using omap-device layer to register device and utilizing data from hwmod data file for base address, dma channel number, Irq_number, device attribute(number of chipselect). 3) Appending base address with pdata reg_offset for omap4 boards. For omap4 all regs used in driver deviate with reg_offset_macros defined with an value of 0x100. So pass this offset through pdata and append the same to base address retrieved from hwmod data file and we are not mapping *_HL_* regs which are not used in driver. Signed-off-by: NCharulatha V <charu@ti.com> Signed-off-by: NGovindraj.R <govindraj.raja@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NPartha Basak <p-basak2@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 28 1月, 2011 1 次提交
-
-
由 Tony Lindgren 提交于
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NThomas Weber <weber@corscience.de> Acked-by: NSourav Poddar <sourav.poddar@ti.com>
-
- 07 1月, 2011 1 次提交
-
-
由 Nishanth Menon 提交于
omap2_wd_timer_disable is declared in wdtimer.h and used by hwmod function pointers for usage, the header inclusion is necessary to ensure that the prototype and function remains consistent. omap_wdt_latency is passed as a pointer and does not need global scope Fixes sparse warnings: arch/arm/mach-omap2/devices.c:981:31: warning: symbol 'omap_wdt_latency' was not declared. Should it be static? arch/arm/mach-omap2/wd_timer.c:27:5: warning: symbol 'omap2_wd_timer_disable' was not declared. Should it be static? Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 22 12月, 2010 2 次提交
-
-
由 Paul Walmsley 提交于
The OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly. Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device. To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog. Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)" Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
-
由 Paul Walmsley 提交于
Split the wd_timer disable code out into its own file, mach-omap2/wd_timer.c; it belongs in its own file rather than cluttering up devices.c. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Charulatha Varadarajan <charu@ti.com>
-
- 21 12月, 2010 1 次提交
-
-
由 Aaro Koskinen 提交于
clk_get() return value should be checked with IS_ERR(). Furthermore, clocks should be put and disabled properly. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-