OMAP: hsmmc: Move mux configuration to hsmmc.c

Moving the definition of mux setting API from devices.c to hsmmc.c
and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux".
Also calling "omap_hsmmc_mux" from omap2_hsmmc_init.
Signed-off-by: NKishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Chris Ball <cjb@laptop.org
Cc: Tony Lindgren <tony@atomide.com
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/devices.c

@@ -708,87 +708,6 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
-			int controller_nr)
-{
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-	if (cpu_is_omap34xx()) {
-		if (controller_nr == 0) {
-			omap_mux_init_signal("sdmmc1_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->slots[0].caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc1_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->slots[0].caps &
-						MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc1_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-		if (controller_nr == 1) {
-			/* MMC2 */
-			omap_mux_init_signal("sdmmc2_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-
-			/*
-			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
-			 * in the board-*.c files
-			 */
-			if (mmc_controller->slots[0].caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc2_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->slots[0].caps &
-							MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-
-		/*
-		 * For MMC3 the pins need to be muxed in the board-*.c files
-		 */
-	}
-}
-
 void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			int nr_controllers)
 {
@@ -802,8 +721,6 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		if (!mmc_data[i])
 			continue;
 
-		omap2_mmc_mux(mmc_data[i], i);
-
 		switch (i) {
 		case 0:
 			base = OMAP2_MMC1_BASE;

arch/arm/mach-omap2/hsmmc.c

@@ -16,7 +16,9 @@
 #include <mach/hardware.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
+#include <plat/mux.h>
 
+#include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
 
@@ -204,6 +206,87 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
 	return 0;
 }
 
+static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+	if (cpu_is_omap34xx()) {
+		if (controller_nr == 0) {
+			omap_mux_init_signal("sdmmc1_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_dat0",
+				OMAP_PIN_INPUT_PULLUP);
+			if (mmc_controller->slots[0].caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+				omap_mux_init_signal("sdmmc1_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->slots[0].caps &
+						MMC_CAP_8_BIT_DATA) {
+				omap_mux_init_signal("sdmmc1_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat7",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+		}
+		if (controller_nr == 1) {
+			/* MMC2 */
+			omap_mux_init_signal("sdmmc2_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_dat0",
+				OMAP_PIN_INPUT_PULLUP);
+
+			/*
+			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
+			 * need to be muxed in the board-*.c files
+			 */
+			if (mmc_controller->slots[0].caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+				omap_mux_init_signal("sdmmc2_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->slots[0].caps &
+							MMC_CAP_8_BIT_DATA) {
+				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+		}
+
+		/*
+		 * For MMC3 the pins need to be muxed in the board-*.c files
+		 */
+	}
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
@@ -361,6 +444,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 			continue;
 		}
 		hsmmc_data[c->mmc - 1] = mmc;
+		omap_hsmmc_mux(hsmmc_data[c->mmc - 1], (c->mmc - 1));
 	}
 
 	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);