Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only qdiscs that check subqueue state before dequeue'ing are PRIO
and RR.  The other qdiscs, including the default pfifo_fast qdisc,
will allow traffic bound for subqueue 0 through to hard_start_xmit.
The check for netif_queue_stopped() is done above in pkt_sched.h, so
it is unnecessary for qdisc_restart().  However, if the underlying
driver is multiqueue capable, and only sets queue states on subqueues,
this will allow packets to enter the driver when it's currently unable
to process packets, resulting in expensive requeues and driver
entries.  This patch re-adds the check for the subqueue status before
calling hard_start_xmit, so we can try and avoid the driver entry when
the queues are stopped.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function dev_deactivate is supposed to only return when
all outstanding transmissions have completed.  Unfortunately
it is possible for store operations in the driver's transmit
function to only become visible after dev_deactivate returns.

This patch fixes this by taking the queue lock after we see
the end of the queue run.  This ensures that all effects of
any previous transmit calls are visible.

If however we detect that there is another queue run occuring,
then we'll warn about it because this should never happen as
we have pointed dev->qdisc to noop_qdisc within the same queue
lock earlier in the functino.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While looking at a net driver with the following construct,

	if (!netif_carrier_ok(dev))
		netif_carrier_on(dev);

it stuck me that the netif_carrier_ok() check was redundant, since
netif_carrier_on() checks bit __LINK_STATE_NOCARRIER anyway.  This is
the same reason why netif_queue_stopped() need not be called prior to
netif_wake_queue().

This is true, but there is however an unwanted side effect from assuming
that netif_carrier_on() can be called multiple times:  it touches the
watchdog, regardless of pre-existing carrier state.

The fix:  move watchdog-up inside the bit-cleared code path.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For N cpus, with full throttle traffic on all N CPUs, funneling traffic
to the same ethernet device, the devices queue lock is contended by all
N CPUs constantly. The TX lock is only contended by a max of 2 CPUS.
In the current mode of operation, after all the work of entering the
dequeue region, we may endup aborting the path if we are unable to get
the tx lock and go back to contend for the queue lock. As N goes up,
this gets worse.

The changes in this patch result in a small increase in performance
with a 4CPU (2xdual-core) with no irq binding. Both e1000 and tg3
showed similar behavior;
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The generic estimator is always built in anways and all the config options
does is prevent including a minimal amount of code for setting it up.
Additionally the option is already automatically selected for most cases.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changes :

- netif_queue_stopped need not be called inside qdisc_restart as
  it has been called already in qdisc_run() before the first skb
  is sent, and in __qdisc_run() after each intermediate skb is
  sent (note : we are the only sender, so the queue cannot get
  stopped while the tx lock was got in the ~LLTX case).

- BUG_ON((int) q->q.qlen < 0) was a relic from old times when -1
  meant more packets are available, and __qdisc_run used to loop
  when qdisc_restart() returned -1. During those days, it was
  necessary to make sure that qlen is never less than zero, since
  __qdisc_run would get into an infinite loop if no packets are on
  the queue and this bug in qdisc was there (and worse - no more
  skbs could ever get queue'd as we hold the queue lock too). With
  Herbert's recent change to return values, this check is not
  required.  Hopefully Herbert can validate this change. If at all
  this is required, it should be added to skb_dequeue (in failure
  case), and not to qdisc_qlen.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New changes :

- Incorporated Peter Waskiewicz's comments.
- Re-added back one warning message (on driver returning wrong value).

Previous changes :

- Converted to use switch/case code which looks neater.

- "if (ret == NETDEV_TX_LOCKED && lockless)" is buggy, and the lockless
  check should be removed, since driver will return NETDEV_TX_LOCKED only
  if lockless is true and driver has to do the locking. In the original
  code as well as the latest code, this code can result in a bug where
  if LLTX is not set for a driver (lockless == 0) but the driver is written
  wrongly to do a trylock (despite LLTX being set), the driver returns
  LOCKED. But since lockless is zero, the packet is requeue'd instead of
  calling collision code which will issue warning and free up the skb.
  Instead this skb will be retried with this driver next time, and the same
  result will ensue. Removing this check will catch these driver bugs instead
  of hiding the problem. I am keeping this change to readability section
  since :
  	a. it is confusing to check two things as it is; and
  	b. it is difficult to keep this check in the changed 'switch' code.

- Changed some names, like try_get_tx_pkt to dev_dequeue_skb (as that is
  the work being done and easier to understand) and do_dev_requeue to
  dev_requeue_skb, merged handle_dev_cpu_collision and tx_islocked to
  dev_handle_collision (handle_dev_cpu_collision is a small routine with only
  one caller, so there is no need to have two separate routines which also
  results in getting rid of two macros, etc.

- Removed an XXX comment as it should never fail (I suspect this was related
  to batch skb WIP, Jamal ?). Converted some functions to original coding
  style of having the return values and the function name on same line, eg
  prio2list.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Over the years this code has gotten hairier. Resulting in many long
discussions over long summer days and patches that get it wrong.
This patch helps tame that code so normal people will understand it.

Thanks to Thomas Graf, Peter J. waskiewicz Jr, and Patrick McHardy
for their valuable reviews.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

round_jiffies for net dev watchdog timer.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

My previous patch that changed the return value of qdisc_restart
incorrectly made the case where dequeue returns empty continue
processing packets.

This patch is based on diagnosis and fix by Patrick McHardy.
Reported-and-debugged-by: NAnant Nitya <kernel@prachanda.info>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we relinquish queue_lock in qdisc_restart and then retake it for
requeueing, we might race against dev_deactivate and end up requeueing
onto noop_qdisc.  This causes a warning to be printed.

This patch fixes this by checking this before we requeue.  As an added
bonus, we can remove the same check in __qdisc_run which was added to
prevent dev->gso_skb from being requeued when we're shutting down.

Even though we've had to add a new conditional in its place, it's better
because it only happens on requeues rather than every single time that
qdisc_run is called.

For this to work we also need to move the clearing of gso_skb up in
dev_deactivate as now qdisc_restart can occur even after we wait for
__LINK_STATE_QDISC_RUNNING to clear (but it won't do anything as long
as the queue and gso_skb is already clear).
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we return the queue length after NETDEV_TX_OK we better
make sure that we have the right queue.  Otherwise we can cause a
stall after a really quick dev_deactive/dev_activate.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current return value scheme and associated comment was invented
back in the 20th century when we still had that tbusy flag.  Things
have changed quite a bit since then (even Tony Blair is moving on
now, not to mention the new French president).

All we need to indicate now is whether the caller should continue
processing the queue.  Therefore it's sufficient if we return 0 if
we want to stop and non-zero otherwise.

This is based on a patch by Krishna Kumar.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When transmit fails with NETDEV_TX_LOCKED the skb is requeued
to dev->qdisc again. The dev->qdisc pointer is protected by
the queue lock which needs to be dropped when attempting to
transmit and acquired again before requeing. The problem is
that qdisc_restart() fetches the dev->qdisc pointer once and
stores it in the `q' variable which is invalidated when
dropping the queue_lock, therefore the variable needs to be
refreshed before requeueing.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch ingress queueing back to use ingress_lock. qdisc_lock_tree now locks
both the ingress and egress qdiscs on the device. All changes to data that
might be used on both ingress and egress needs to be protected by using
qdisc_lock_tree instead of manually taking dev->queue_lock. Additionally
the qdisc stats_lock needs to be initialized to ingress_lock for ingress
qdiscs.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we're now holding the rtnl during the entire dump operation, we
can remove qdisc_tree_lock, whose only purpose is to protect dump
callbacks from concurrent changes to the qdisc tree.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces users of the round_jiffies() function in the
networking code.

These timers all were of the "about once a second" or "about once
every X seconds" variety and several showed up in the "what wakes the
cpu up" profiles that the tickless patches provide.  Some timers are
highly dynamic based on network load; but even on low activity systems
they still show up so the rounding is done only in cases of low
activity, allowing higher frequency timers in the high activity case.

The various hardware watchdogs are an obvious case; they run every 2
seconds but aren't otherwise specific of exactly when they need to
run.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the following unused EXPORT_SYMBOL's:
- sch_api.c: qdisc_lookup
- sch_generic.c: __netdev_watchdog_up
- sch_generic.c: noop_qdisc_ops
- sch_generic.c: qdisc_alloc
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set parent classids in default qdiscs to allow walking up the tree
from outside the qdiscs. This is needed by the next patch.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The move of qdisc destruction to a rcu callback broke locking in the
entire qdisc layer by invalidating previously valid assumptions about
the context in which changes to the qdisc tree occur.

The two assumptions were:

- since changes only happen in process context, read_lock doesn't need
  bottem half protection. Now invalid since destruction of inner qdiscs,
  classifiers, actions and estimators happens in the RCU callback unless
  they're manually deleted, resulting in dead-locks when read_lock in
  process context is interrupted by write_lock_bh in bottem half context.

- since changes only happen under the RTNL, no additional locking is
  necessary for data not used during packet processing (f.e. u32_list).
  Again, since destruction now happens in the RCU callback, this assumption
  is not valid anymore, causing races while using this data, which can
  result in corruption or use-after-free.

Instead of "fixing" this by disabling bottem halfs everywhere and adding
new locks/refcounting, this patch makes these assumptions valid again by
moving destruction back to process context. Since only the dev->qdisc
pointer is protected by RCU, but ->enqueue and the qdisc tree are still
protected by dev->qdisc_lock, destruction of the tree can be performed
immediately and only the final free needs to happen in the rcu callback
to make sure dev_queue_xmit doesn't access already freed memory.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix lockdep warning with GRE, iptables and Speedtouch ADSL, PPP over ATM.

On Sat, Sep 02, 2006 at 08:39:28PM +0000, Krzysztof Halasa wrote:
> 
> =======================================================
> [ INFO: possible circular locking dependency detected ]
> -------------------------------------------------------
> swapper/0 is trying to acquire lock:
>  (&dev->queue_lock){-+..}, at: [<c02c8c46>] dev_queue_xmit+0x56/0x290
> 
> but task is already holding lock:
>  (&dev->_xmit_lock){-+..}, at: [<c02c8e14>] dev_queue_xmit+0x224/0x290
> 
> which lock already depends on the new lock.

This turns out to be a genuine bug.  The queue lock and xmit lock are
intentionally taken out of order.  Two things are supposed to prevent
dead-locks from occuring:

1) When we hold the queue_lock we're supposed to only do try_lock on the
tx_lock.

2) We always drop the queue_lock after taking the tx_lock and before doing
anything else.

> 
> the existing dependency chain (in reverse order) is:
> 
> -> #1 (&dev->_xmit_lock){-+..}:
>        [<c012e7b6>] lock_acquire+0x76/0xa0
>        [<c0336241>] _spin_lock_bh+0x31/0x40
>        [<c02d25a9>] dev_activate+0x69/0x120

This path obviously breaks assumption 1) and therefore can lead to ABBA
dead-locks.

I've looked at the history and there seems to be no reason for the lock
to be held at all in dev_watchdog_up.  The lock appeared in day one and
even there it was unnecessary.  In fact, people added __dev_watchdog_up
precisely in order to get around the tx lock there.

The function dev_watchdog_up is already serialised by rtnl_lock since
its only caller dev_activate is always called under it.

So here is a simple patch to remove the tx lock from dev_watchdog_up.
In 2.6.19 we can eliminate the unnecessary __dev_watchdog_up and
replace it with dev_watchdog_up.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

This patch adds the infrastructure for generic segmentation offload.
The idea is to tap into the potential savings of TSO without hardware
support by postponing the allocation of segmented skb's until just
before the entry point into the NIC driver.

The same structure can be used to support software IPv6 TSO, as well as
UFO and segmentation offload for other relevant protocols, e.g., DCCP.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev_deactivate function has bit-rotted since the introduction of
lockless drivers.  In particular, the spin_unlock_wait call at the end
has no effect on the xmit routine of lockless drivers.

With a little bit of work, we can make it much more useful by providing
the guarantee that when it returns, no more calls to the xmit routine
of the underlying driver will be made.

The idea is simple.  There are two entry points in to the xmit routine.
The first comes from dev_queue_xmit.  That one is easily stopped by
using synchronize_rcu.  This works because we set the qdisc to noop_qdisc
before the synchronize_rcu call.  That in turn causes all subsequent
packets sent to dev_queue_xmit to be dropped.  The synchronize_rcu call
also ensures all outstanding calls leave their critical section.

The other entry point is from qdisc_run.  Since we now have a bit that
indicates whether it's running, all we have to do is to wait until the
bit is off.

I've removed the loop to wait for __LINK_STATE_SCHED to clear.  This is
useless because netif_wake_queue can cause it to be set again.  It is
also harmless because we've disarmed qdisc_run.

I've also removed the spin_unlock_wait on xmit_lock because its only
purpose of making sure that all outstanding xmit_lock holders have
exited is also given by dev_watchdog_down.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Having two or more qdisc_run's contend against each other is bad because
it can induce packet reordering if the packets have to be requeued.  It
appears that this is an unintended consequence of relinquinshing the queue
lock while transmitting.  That in turn is needed for devices that spend a
lot of time in their transmit routine.

There are no advantages to be had as devices with queues are inherently
single-threaded (the loopback device is not but then it doesn't have a
queue).

Even if you were to add a queue to a parallel virtual device (e.g., bolt
a tbf filter in front of an ipip tunnel device), you would still want to
process the queue in sequence to ensure that the packets are ordered
correctly.

The solution here is to steal a bit from net_device to prevent this.

BTW, as qdisc_restart is no longer used by anyone as a module inside the
kernel (IIRC it used to with netif_wake_queue), I have not exported the
new __qdisc_run function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Various drivers use xmit_lock internally to synchronise with their
transmission routines.  They do so without setting xmit_lock_owner.
This is fine as long as netpoll is not in use.

With netpoll it is possible for deadlocks to occur if xmit_lock_owner
isn't set.  This is because if a printk occurs while xmit_lock is held
and xmit_lock_owner is not set can cause netpoll to attempt to take
xmit_lock recursively.

While it is possible to resolve this by getting netpoll to use
trylock, it is suboptimal because netpoll's sole objective is to
maximise the chance of getting the printk out on the wire.  So
delaying or dropping the message is to be avoided as much as possible.

So the only alternative is to always set xmit_lock_owner.  The
following patch does this by introducing the netif_tx_lock family of
functions that take care of setting/unsetting xmit_lock_owner.

I renamed xmit_lock to _xmit_lock to indicate that it should not be
used directly.  I didn't provide irq versions of the netif_tx_lock
functions since xmit_lock is meant to be a BH-disabling lock.

This is pretty much a straight text substitution except for a small
bug fix in winbond.  It currently uses
netif_stop_queue/spin_unlock_wait to stop transmission.  This is
unsafe as an IRQ can potentially wake up the queue.  So it is safer to
use netif_tx_disable.

The hamradio bits used spin_lock_irq but it is unnecessary as
xmit_lock must never be taken in an IRQ handler.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a potential jiffy wraparound bug in the transmit watchdog
that is easily avoided by using time_after().
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of the old __dev_put macro that is just a hold over from pre 2.6
kernel.  And turn dev_hold into an inline instead of a macro.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

# grep -r 'netif_carrier_o[nf]' linux-2.6.12 | wc -l
246

# size vmlinux.org vmlinux.carrier
text    data     bss     dec     hex filename
4339634 1054414  259296 5653344  564360 vmlinux.org
4337710 1054414  259296 5651420  563bdc vmlinux.carrier

And this ain't an allyesconfig kernel!
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

qdisc_create_dflt() is missing to destroy the newly allocated
default qdisc if the initialization fails resulting in leaks
of all kinds. The only caller in mainline which may trigger
this bug is sch_tbf.c in tbf_create_dflt_qdisc().

Note: qdisc_create_dflt() doesn't fulfill the official locking
      requirements of qdisc_destroy() but since the qdisc could
      never be seen by the outside world this doesn't matter
      and it can stay as-is until the locking of pkt_sched
      is cleaned up.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current call to __qdisc_dequeue_head leads to a branch
misprediction for every loop iteration, the fact that the
most common priority is 2 makes this even worse.  This issue
has been brought up by Eric Dumazet <dada1@cosmosbay.com>
but unlike his solution which was to manually unroll the loop,
this approach preserves the possibility to increase the number
of bands at compile time. 
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds qdisc_alloc() to share code between qdisc_create()
and qdisc_create_dflt(). Hides the qdisc alignment behind
macros and makes use of them.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removes the skb trimming code which is not needed since we never
touch the skb upon failure. Removes unnecessary initializers,
and simplifies the code a bit.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

prio2list() returns the relevant sk_buff_head for the
band specified by the priority for a given skb.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>