- 12 7月, 2007 32 次提交
-
-
由 Tejun Heo 提交于
kobj->dentry can go away anytime unless the user controls when the associated sysfs node is deleted. This patch implements kobj_sysfs_assoc_lock which protects kobj->dentry. This will be used to maintain kobj based API when converting sysfs to use sysfs_dirent tree instead of dentry/kobject. Note that this lock belongs to kobject/driver-model not sysfs. Once sysfs is converted to not use kobject in its interface, this can be removed from sysfs. This is in preparation of object reference simplification. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Make sd->s_element a union of sysfs_elem_{dir|symlink|attr|bin_attr} and rename it to s_elem. This is to achieve... * some level of type checking : changing symlink to point to sysfs_dirent instead of kobject is much safer and less painful now. * easier / standardized dereferencing * allow sysfs_elem_* to contain more than one entry Where possible, pointer is obtained by directly deferencing from sd instead of going through other entities. This reduces dependencies to dentry, inode and kobject. to_attr() and to_bin_attr() are unused now and removed. This is in preparation of object reference simplification. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Add s_name to sysfs_dirent. This is to further reduce dependency to the associated dentry. Name is copied for directories and symlinks but not for attributes. Where possible, name dereferences are converted to use sd->s_name. sysfs_symlink->link_name and sysfs_get_name() are unused now and removed. This change allows symlink to be implemented using sysfs_dirent tree proper, which is the last remaining dentry-dependent sysfs walk. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Add sysfs_dirent->s_parent. With this patch, each sd points to and holds a reference to its parent. This allows walking sysfs tree without referencing sd->s_dentry which can go away anytime if the user doesn't control when it's deleted. sd->s_parent is initialized and parent is referenced in sysfs_attach_dirent(). Reference to parent is released when the sd is released, so as long as reference to a sd is held, s_parent can be followed. dentry walk in sysfs_readdir() is convereted to s_parent walk. This will be used to reimplement symlink such that it uses only sysfs_dirent tree. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Currently there are four functions to create sysfs_dirent - __sysfs_new_dirent(), sysfs_new_dirent(), __sysfs_make_dirent() and sysfs_make_dirent(). Other than sysfs_make_dirent(), no function has two users if calls to implement other functions are excluded. This patch consolidates sysfs_dirent creation functions into the following two. * sysfs_new_dirent() : allocate and initialize * sysfs_attach_dirent() : attach to sysfs_dirent hierarchy and/or associate with dentry This simplifies interface and gives callers more flexibility. This is in preparation of object reference simplification. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Error handling in sysfs_rename_dir() was broken. * When lookup_one_len() fails, 0 is returned. * If parent inode check fails, returns with inode mutex and rename rwsem held. This patch fixes the above bugs and flattens error handling such that it's more readable and easier to modify. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Flatten cleanup paths in sysfs_add_link() and create_dir() to improve readability and ease further changes to these functions. This is in preparation of object reference simplification. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Error handling in fs/sysfs/bin.c:write() was wrong because size_t count is used to receive return value from flush_write() which is negative on failure. This patch updates write() such that int variable is used instead. read() is updated the same way for consistency. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Make sysfs_put() ignore NULL sd instead of oopsing. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
sysfs used simple incrementing allocator which is not guaranteed to be unique. This patch makes sysfs use ida to give each sd a unique and packed inode number. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
There is no reason this function should be inlined and soon to follow sysfs object reference simplification will make it heavier. Move it to dir.c. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Implement idr based id allocator. ida is used the same way idr is used but lacks id -> ptr translation and thus consumes much less memory. struct ida_bitmap is attached as leaf nodes to idr tree which is managed by the idr code. Each ida_bitmap is 128bytes long and contains slightly less than a thousand slots. ida is more aggressive with releasing extra resources acquired using ida_pre_get(). After every successful id allocation, ida frees one reserved idr_layer if possible. Reserved ida_bitmap is not freed automatically but only one ida_bitmap is reserved and it's almost always used right away. Under most circumstances, ida won't hold on to memory for too long which isn't actively used. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
Separate out idr_mark_full() from sub_alloc() and make marking the allocated slot full the responsibility of idr_get_new_above_int(). Allocation part of idr_get_new_above_int() is renamed to idr_get_empty_slot(). New idr_get_new_above_int() allocates a slot using the function, install the user pointer and marks it full using idr_mark_full(). This change doesn't introduce any behavior change. This will be used by ida. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
In sub_alloc(), when bitmap search fails, it goes up one level to continue search. This is done by updating the id cursor and searching the upper level again. If the cursor was at the end of the upper level, we need to go further than that. This wasn't implemented and when that happens the part of the cursor which indexes into the upper level wraps and sub_alloc() ends up searching the wrong bitmap. It allocates id which doesn't match the actual slot. This patch fixes this by restarting from the top if the search needs to go higher than one level. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Cornelia Huck 提交于
This converts code of the form if ((error = some_func())) goto fixup; to error = some_func(); if (error) goto fixup; Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The saved_state member of 'struct dev_pm_info' that's going to be removed is used in arch/arm/common/locomo.c, arch/arm/common/sa1111.c and arch/arm/mach-sa1100/neponset.c. Change the code in there to use local variables for saving the state of devices during suspend. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The checks if the device's parent is in the right state done in drivers/base/power/suspend.c and drivers/base/power/resume.c serve no particular purpose, since if the parent is in a wrong power state, the device's suspend or resume callbacks are supposed to return an error anyway. Moreover, they are also useless from the sanity checking point of view, because they rely on the code being checked to set dev->parent->power.power_state.event appropriately, which need not happen if that code is buggy. For these reasons they can be removed. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The suspend routines should be called for every device during a system sleep transition, regardless of the device's state, so that drivers can regard these method calls as notifications that the system is about to go to sleep, rather than as directives to put their devices into the 'off' state. This is documented in Documentation/power/devices.txt and is already done in the core resume code, so it seems reasonable to make the core suspend code behave accordingly. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The prev_state member of struct dev_pm_info (defined in include/linux/pm.h) is only used during a resume to check if the device's state before the suspend was 'off', in which case the device is not resumed. However, in such cases the decision whether or not to resume the device should be made on the driver level and the resume callbacks from the device's bus and class should be executed anyway (the may be needed for some things other than just powering on the device). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
Every file should include the headers containing the prototypes for it's global functions. Since the GNU C compiler is now able to detect that the function prototype of devres_release_all() in the header and the actual function disagree regarding the return value, this patch also fixes this bug. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael S. Tsirkin 提交于
attribute_container.c uses DEFINE_MUTEX, so while linux/mutex.h seems to be pulled in indirectly by one of the headers it includes, the right thing is to include linux/mutex.h directly. Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
-
由 Rafael J. Wysocki 提交于
Reduce code duplication in drivers/base/suspend.c by introducing a separate function for printing diagnostic messages. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The saved_state member of struct dev_pm_info, defined in include/linux/pm.h, is not used anywhere, so it can be removed. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rafael J. Wysocki 提交于
The pm_parent member of struct dev_pm_info (defined in include/linux/pm.h) is only used to check if the device's parent is in the right state while the device is being suspended or resumed. However, this can be done just as well with the help of the parent pointer in struct device, so pm_parent can be removed along with some code that handles it. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Kaehlcke 提交于
The Power Management code uses semaphores as mutexes. Use the mutex API instead of the (binary) semaphores. Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Kaehlcke 提交于
The sysdev code use a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
We get uevents for a bus/class going away, but not one registering. Add the missing uevent in kset_register(), which will send an event for a new bus/class. Suppress all unwanted uevents for bus subdirectories like /bus/*/devices/, /bus/*/drivers/. Now we get for module usbcore: add /module/usbcore (module) add /bus/usb (bus) add /class/usb_host (class) add /bus/usb/drivers/hub (drivers) add /bus/usb/drivers/usb (drivers) remove /bus/usb/drivers/usb (drivers) remove /bus/usb/drivers/hub (drivers) remove /class/usb_host (class) remove /bus/usb (bus) remove /module/usbcore (module) instead of: add /module/usbcore (module) add /bus/usb/drivers/hub (drivers) add /bus/usb/drivers/usb (drivers) remove /bus/usb/drivers/usb (drivers) remove /bus/usb/drivers/hub (drivers) remove /class/usb_host (class) remove /bus/usb/drivers (bus) remove /bus/usb/devices (bus) remove /bus/usb (bus) remove /module/usbcore (module) Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lennart Poettering 提交于
The patch below adds DMI/SMBIOS based module autoloading to the Linux kernel. The idea is to load laptop drivers automatically (and other drivers which cannot be autoloaded otherwise), based on the DMI system identification information of the BIOS. Right now most distros manually try to load all available laptop drivers on bootup in the hope that at least one of them loads successfully. This patch does away with all that, and uses udev to automatically load matching drivers on the right machines. Basically the patch just exports the DMI information that has been parsed by the kernel anyway to userspace via a sysfs device /sys/class/dmi/id and makes sure that proper modalias attributes are available. Besides adding the "modalias" attribute it also adds attributes for a few other DMI fields which might be useful for writing udev rules. This patch is not an attempt to export the entire DMI/SMBIOS data to userspace. We already have "dmidecode" which parses the complete DMI info from userspace. The purpose of this patch is machine model identification and good udev integration. To take advantage of DMI based module autoloading, a driver should export one or more MODULE_ALIAS fields similar to these: MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); These lines are specific to my msi-laptop.c driver. They are basically just a concatenation of a few carefully selected DMI fields with all potentially bad characters stripped. Besides laptop drivers, modules like "hdaps", the i2c modules and the hwmon modules are good candidates for "dmi:" MODULE_ALIAS lines. Besides merely exporting the DMI data via sysfs the patch adds support for a few more DMI fields. Especially the CHASSIS fields are very useful to identify different laptop modules. The patch also adds working MODULE_ALIAS lines to my msi-laptop.c driver. I'd like to thank Kay Sievers for helping me to clean up this patch for posting it on lkml. Patch is against Linus' current GIT HEAD. Should probably apply to older kernels as well without modification. Signed-off-by: NLennart Poettering <mzxreary@0pointer.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jan Kara 提交于
Implement debugfs_rename() to allow renaming files/directories in debugfs. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
Here's a document to help clear things up. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 7月, 2007 8 次提交
-
-
由 Alan Cox 提交于
Add the termios2 structure ready for enabling on most platforms. One or two like Sparc are plain weird so have been left alone. Most can use the same structure as ktermios for termios2 (ie the newer ioctl uses the structure matching the current kernel structure) Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelianov 提交于
Many places in kernel use seq_file API to iterate over a regular list_head. The code for such iteration is identical in all the places, so it's worth introducing a common helpers. This makes code about 300 lines smaller: The first version of this patch made the helper functions static inline in the seq_file.h header. This patch moves them to the fs/seq_file.c as Andrew proposed. The vmlinux .text section sizes are as follows: 2.6.22-rc1-mm1: 0x001794d5 with the previous version: 0x00179505 with this patch: 0x00179135 The config file used was make allnoconfig with the "y" inclusion of all the possible options to make the files modified by the patch compile plus drivers I have on the test node. This patch: Many places in kernel use seq_file API to iterate over a regular list_head. The code for such iteration is identical in all the places, so it's worth introducing a common helpers. Signed-off-by: NPavel Emelianov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
sx.c is failing to locate Graham's card. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Graham Murray <gmurray@webwayone.co.uk> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Purdie 提交于
This is a hybrid version of the patch to add the LZO1X compression algorithm to the kernel. Nitin and myself have merged the best parts of the various patches to form this version which we're both happy with (and are jointly signing off). The performance of this version is equivalent to the original minilzo code it was based on. Bytecode comparisons have also been made on ARM, i386 and x86_64 with favourable results. There are several users of LZO lined up including jffs2, crypto and reiser4 since its much faster than zlib. Signed-off-by: NNitin Gupta <nitingupta910@gmail.com> Signed-off-by: NRichard Purdie <rpurdie@openedhand.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: at91_mci: fix hanging and rework to match flowcharts mmc: at91_mci typo sdhci: Fix "Unexpected interrupt" handling mmc: fix silly copy-and-paste error mmc: move layer init and workqueue to core file mmc: refactor host class handling mmc: refactor bus operations sdhci: add ene controller id mmc: bounce requests for simple hosts
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits) [libata] sata_mv: print out additional chip info during probe [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) [libata] Clean up driver udma_mask initializers libata: Support chips with 64K PRD quirk Add a PCI ID for santa rosa's PATA controller. sata_sil24: sil24_interrupt() micro-optimisation Add irq_flags to struct pata_platform_info sata_promise: cleanups [libata] pata_ixp4xx: kill unused var ata_piix: fix pio/mwdma programming [libata] ahci: minor internal cleanups [ATA] Add named constant for ATAPI command DEVICE RESET [libata] sata_sx4, sata_via: minor documentation updates [libata] ahci: minor internal cleanups [libata] ahci: Factor out SATA port init into a separate function [libata] pata_sil680: minor cleanups from benh [libata] sata_sx4: named constant cleanup [libata] pata_ixp4xx: convert to new EH [libata] pdc_adma: Reorder initializers with a couple structs ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits) [MIPS] PNX8550: Cleanup proc code. [MIPS] WRPPMC: Fix build. [MIPS] Yosemite: Fix modpost warnings. [MIPS] Change names of local variables to silence sparse [MIPS] SB1: Fix modpost warning. [MIPS] PNX: Fix modpost warnings. [MIPS] Alchemy: Fix modpost warnings. [MIPS] Non-FPAFF: Fix warning. [MIPS] DEC: Fix modpost warning. [MIPS] MIPSsim: Enable MIPSsim virtual network driver. [MIPS] Delete Ocelot 3 support. [MIPS] remove LASAT Networks platforms support [MIPS] Early check for SMTC kernel on non-MT processor [MIPS] Add debugfs files to show fpuemu statistics [MIPS] Add some debugfs files to debug unaligned accesses [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs [MIPS] tc35815: Load MAC address via platform_device [MIPS] Move FPU affinity code into separate file. [MIPS] Make ioremap() work on TX39/49 special unmapped segment [MIPS] rbtx4938: Update and minimize defconfig ...
-