When session get evicted, all file locks associated with the session
get released remotely by mds. File locks tracked by kernel become
stale. In this situation, set an error flag on inode. The flag makes
further file locks return -EIO.

Another option to handle this situation is cleanup file locks tracked
kernel. I do not choose it because it is inconvenient to notify user
program about the error.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Don't malloc if there is no flock.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

file locks are tracked by inode's auth mds. dropping auth caps
is equivalent to releasing all file locks.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit c69899a1 "NFSv4: Update of VFS byte range lock must be
atomic with the stateid update", NFSv4 has been inserting locks in rpciod
worker context.  The result is that the file_lock's fl_nspid is the
kworker's pid instead of the original userspace pid.

The fl_nspid is only used to represent the namespaced virtual pid number
when displaying locks or returning from F_GETLK.  There's no reason to set
it for every inserted lock, since we can usually just look it up from
fl_pid.  So, instead of looking up and holding struct pid for every lock,
let's just look up the virtual pid number from fl_pid when it is needed.
That means we can remove fl_nspid entirely.

The translaton and presentation of fl_pid should handle the following four
cases:

1 - F_GETLK on a remote file with a remote lock:
    In this case, the filesystem should determine the l_pid to return here.
    Filesystems should indicate that the fl_pid represents a non-local pid
    value that should not be translated by returning an fl_pid <= 0.

2 - F_GETLK on a local file with a remote lock:
    This should be the l_pid of the lock manager process, and translated.

3 - F_GETLK on a remote file with a local lock, and
4 - F_GETLK on a local file with a local lock:
    These should be the translated l_pid of the local locking process.

Fuse was already doing the correct thing by translating the pid into the
caller's namespace.  With this change we must update fuse to translate
to init's pid namespace, so that the locks API can then translate from
init's pid namespace into the pid namespace of the caller.

With this change, the locks API will expect that if a filesystem returns
a remote pid as opposed to a local pid for F_GETLK, that remote pid will
be <= 0.  This signifies that the pid is remote, and the locks API will
forego translating that pid into the pid namespace of the local calling
process.

Finally, we convert remote filesystems to present remote pids using
negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote
pid returned for F_GETLK lock requests.

Since local pids will never be larger than PID_MAX_LIMIT (which is
currently defined as <= 4 million), but pid_t is an unsigned int, we
should have plenty of room to represent remote pids with negative
numbers if we assume that remote pid numbers are similarly limited.

If this is not the case, then we run the risk of having a remote pid
returned for which there is also a corresponding local pid.  This is a
problem we have now, but this patch should reduce the chances of that
occurring, while also returning those remote pid numbers, for whatever
that may be worth.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Don't re-send interrupted flock request in cases of mds failover
and receiving request forward. Because corresponding 'lock intr'
request may have been finished, it won't get re-sent.

Link: http://tracker.ceph.com/issues/20170Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait().  This
allows for some later cleanup.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>

posix locks should be in ctx->flc_posix list
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This reverts commit 9bd0f45b.

Linus rightly pointed out that I failed to initialize the counters
when adding them, so they don't work as expected. Just revert this
patch for now.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>

This makes things a bit more efficient in the cifs and ceph lock
pushing code.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

There is only a single call site for each of these functions, and the
caller takes the i_lock prior to calling them and drops it just
afterward. Move the spinlocking into the functions instead.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Acked-by: NChristoph Hellwig <hch@lst.de>

When a lock operation is interrupted, current code sends a unlock request to
MDS to undo the lock operation. This method does not work as expected because
the unlock request can drop locks that have already been acquired.

The fix is use the newly introduced CEPH_LOCK_FCNTL_INTR/CEPH_LOCK_FLOCK_INTR
requests to interrupt blocked file lock request. These requests do not drop
locks that have alread been acquired, they only interrupt blocked file lock
request.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Currently, the fl_owner isn't set for flock locks. Some filesystems use
byte-range locks to simulate flock locks and there is a common idiom in
those that does:

    fl->fl_owner = (fl_owner_t)filp;
    fl->fl_start = 0;
    fl->fl_end = OFFSET_MAX;

Since flock locks are generally "owned" by the open file description,
move this into the common flock lock setup code. The fl_start and fl_end
fields are already set appropriately, so remove the unneeded setting of
that in flock ops in those filesystems as well.

Finally, the lease code also sets the fl_owner as if they were owned by
the process and not the open file description. This is incorrect as
leases have the same ownership semantics as flock locks. Set them the
same way. The lease code doesn't actually use the fl_owner value for
anything, so this is more for consistency's sake than a bugfix.
Reported-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (Staging portion)
Acked-by: NJ. Bruce Fields <bfields@fieldses.org>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

flock and posix lock should use fl->fl_file instead of process ID
as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner
is usually equal to fl->fl_file, but it also can be a customized
value). The process ID of who holds the lock is just for F_GETLK
fcntl(2).

The fix is rename the 'pid' fields of struct ceph_mds_request_args
and struct ceph_filelock to 'owner', rename 'pid_namespace' fields
to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages.
We also set the most significant bit of the 'owner' field. MDS can
use that bit to distinguish between old and new clients.

The MDS counterpart of this patch modifies the flock code to not
take the 'pid_namespace' into consideration when checking conflict
locks.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

VFS does not directly pass flock's operation code to filesystem's
flock callback. It translates the operation code to the form how
posix lock's parameters are presented.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NJim Schutt <jaschut@sandia.gov>
Reviewed-by: NAlex Elder <elder@inktank.com>

Having a global lock that protects all of this code is a clear
scalability problem. Instead of doing that, move most of the code to be
protected by the i_lock instead. The exceptions are the global lists
that the ->fl_link sits on, and the ->fl_block list.

->fl_link is what connects these structures to the
global lists, so we must ensure that we hold those locks when iterating
over or updating these lists.

Furthermore, sound deadlock detection requires that we hold the
blocked_list state steady while checking for loops. We also must ensure
that the search and update to the list are atomic.

For the checking and insertion side of the blocked_list, push the
acquisition of the global lock into __posix_lock_file and ensure that
checking and update of the  blocked_list is done without dropping the
lock in between.

On the removal side, when waking up blocked lock waiters, take the
global lock before walking the blocked list and dequeue the waiters from
the global list prior to removal from the fl_block list.

With this, deadlock detection should be race free while we minimize
excessive file_lock_lock thrashing.

Finally, in order to avoid a lock inversion problem when handling
/proc/locks output we must ensure that manipulations of the fl_block
list are also protected by the file_lock_lock.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc()
while holding a lock, but it's spoiled because ceph_pagelist_addpage()
always calls kmap(), which might sleep.  Here's the result:

[13439.295457] ceph: mds0 reconnect start
[13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58
[13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1
    . . .
[13439.376225] Call Trace:
[13439.378757]  [<ffffffff81076f4c>] __might_sleep+0xfc/0x110
[13439.384353]  [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph]
[13439.391491]  [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph]
[13439.398035]  [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50
[13439.403775]  [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20
[13439.409277]  [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph]
[13439.415622]  [<ffffffff81196748>] ? igrab+0x28/0x70
[13439.420610]  [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph]
[13439.427584]  [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph]
[13439.434499]  [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph]
[13439.441646]  [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph]
[13439.448363]  [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph]
[13439.455250]  [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph]
[13439.461534]  [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph]
[13439.468432]  [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10
[13439.473934]  [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph]
[13439.480464]  [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph]
[13439.486492]  [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph]
[13439.493190]  [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph]
    . . .
[13439.587132] ceph: mds0 reconnect success
[13490.720032] ceph: mds0 caps stale
[13501.235257] ceph: mds0 recovery completed
[13501.300419] ceph: mds0 caps renewed

Fix it up by encoding locks into a buffer first, and when the number
of encoded locks is stable, copy that into a ceph_pagelist.

[elder@inktank.com: abbreviated the stack info a bit.]

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NJim Schutt <jaschut@sandia.gov>
Reviewed-by: NAlex Elder <elder@inktank.com>

In his review, Alex Elder mentioned that he hadn't checked that
num_fcntl_locks and num_flock_locks were properly decoded on the
server side, from a le32 over-the-wire type to a cpu type.
I checked, and AFAICS it is done; those interested can consult
    Locker::_do_cap_update()
in src/mds/Locker.cc and src/include/encoding.h in the Ceph server
code (git://github.com/ceph/ceph).

I also checked the server side for flock_len decoding, and I believe
that also happens correctly, by virtue of having been declared
__le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h.

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NJim Schutt <jaschut@sandia.gov>
Reviewed-by: NAlex Elder <elder@inktank.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If we request a lock and then abort (e.g., ^C), we need to send a matching
unlock request to the MDS to unwind our lock attempt to avoid indefinitely
blocking other clients.
Reported-by: NBrian Chrisman <brchrisman@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: NSage Weil <sage@newdream.net>

Fill in the local lock with response data if appropriate,
and don't call posix_lock_file when reading locks.
Signed-off-by: NHerb Shiu <herb_shiu@tcloudcomputing.com>
Acked-by: NGreg Farnum <gregf@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NHerb Shiu <herb_shiu@tcloudcomputing.com>
Acked-by: NGreg Farnum <gregf@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

When the lock_kernel() turns into lock_flocks() and a spinlock, we won't
be able to do allocations with the lock held.  Preallocate space without
the lock, and retry if the lock state changes out from underneath us.
Signed-off-by: NGreg Farnum <gregf@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: NSage Weil <sage@newdream.net>

Just scrubbing some warnings so I can see real problem ones in the build
noise. For 32bit we need to coax gcc politely into believing we really
honestly intend to the casts. Using (u64)(unsigned long) means we cast from
a pointer to a type of the right size and then extend it. This stops the
warning spew.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Implement flock inode operation to support advisory file locking.  All
lock/unlock operations are synchronous with the MDS.  Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.
Signed-off-by: NGreg Farnum <gregf@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>