Modules: HDA Codec driver

Fix max_channels computation for STAC92xx codecs in the case only
HP pin without line-out pins is detected in the default pin config.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Adds support for the SigmaTel STAC927x HDA codec family.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Add SigmaTel HDA support for the Intel D975XBK motherboard.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added the missing 'Capture Switch' control for Sigmatel STAC92xx codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

- Common labels for input pins
- Fix and clean up of Realtek codec parsers
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver
More models and improvements for ALC880, ALC260 and ALC882 codecs, too.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

- Explictly set pin control as input for all input pins
- Fix bug in 922x mixer (no mute on adc0vol)
- Remove broken ch_mode control
- Add support for jack retasking mixer controls to use rear line and
  mic as surround outputs
- Add board tables to support autodetect and pin config defaults for
  systems with broken bioses
- Add support for several Intel mobos
- Add support for DFI mobo with reference boards attached
  (gets rid of compile time switch to use reference boards)
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

- Fix connection list parsing (with ranged flag).
- Increase the max number of connections
- Introduce widget capabilities cache
- Power up/down widgets at init, suspend and resume
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver,HDA generic driver

Remove xxx_t typedefs from the HD-Audio codec support codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds support for detecting hp insertion/removal and enable/disable of
lineouts based on unsolicited events.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Use the new kstrdup() function instead of in-house one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds resume support to the SigmaTel HDA patch. Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds 6/8 channel support to the SigmaTel HDA patch. Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds SPDIF in/out support to the SigmaTel HDA codecs. Now builds
the input mux control element names from the defcfg regs.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver,HDA Codec driver
Add initial SigmaTel codec support for 9200 and 922x. Note that
this hda patch relies on the configuration default registers to
be set correctly (normally by BIOS/firmware) in order for it to
set up pin widgets properly. There's a test switch in the patch
so it will work with the SigmaTel reference boards that are usually
plugged into a system that doesn't set the configuration default
registers. It supports 2 channel analog out and line/mic in. I
plan to add >2 channel support and spdif support shortly.
Please apply.
Signed-off-by: NMatt <matt@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>