Modules: HDA Codec driver

Fix max_channels computation for STAC92xx codecs in the case only
HP pin without line-out pins is detected in the default pin config.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the dxs entry for P4M800/VIA8237R,
reported by OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Adds support for the SigmaTel STAC927x HDA codec family.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Add SigmaTel HDA support for the Intel D975XBK motherboard.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

This adds support for Agere's variant of Si3054/5 based HDA modem.
Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CS4236+ driver

PnP ids for Netfinity 3000 builtin soundcard.

This one works for me.

This patch was submitted through kernel Bugzilla #4214.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Generic drivers

Fix a gcc-4.1 compile warning regarding uninitialized variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Opti9xx drivers

Fix a gcc-4.1 compile warning regarding uninitialized variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Wavefront drivers

Fix a gcc-4.1 compile warning regarding uninitialized variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Add dxs entry for a FSC board.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

au_readl() does needed byteswapping, etc.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Acked-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Modules: CS4236+ driver
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: PPC PMAC driver

In 2.6.16-rc1 there is a small typo introduced by the
'Remove device_node addrs/n_addr' changes
which prevents my Powerbook G4 sound from working:

	Advanced Linux Sound Architecture Driver Version 1.0.11rc2
	(Wed Jan 04 08:57:20 2006 UTC).
	snd: can't request rsrc  0 (Sound Control: 0x80000000:80004fff)
	ALSA device list:
	   No soundcards found.

The patch below fixes it. Of course, the patch fixing the i2c issues
('i2c_smbus_write_i2c_block_data' patch) needs to be applied to in
order for the sound to completly work.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

sound/pci/pcxhr/pcxhr.c: In function 'pcxhr_update_r_buffer':
sound/pci/pcxhr/pcxhr.c:460: warning: unsigned int format, different type arg (arg 7)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: RME9652 driver

sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_preallocate_memory':
sound/pci/rme9652/hdspm.c:3327: warning: int format, different type arg (arg 4)
sound/pci/rme9652/hdspm.c:3331: warning: int format, different type arg (arg 4)
sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_create':
sound/pci/rme9652/hdspm.c:3513: warning: int format, different type arg (arg 4)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: SB16/AWE driver

Fix the duplicated PnP entry between sb16 and sbawe drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: OPL3SA2 driver

Fix the conflict of driver name 'opl3sa2' on sysfs with OSS driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CS46xx driver

Reported by <dcb314@hotmail.com> in
http://bugzilla.kernel.org/show_bug.cgi?id=5903Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: au88x0 driver

Fixed an uninitialized variable.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the dxs_support entry for EpoX 9HEAI.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added the missing 'Capture Switch' control for Sigmatel STAC92xx codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

This patch adds a quirk entry for the Dell Optiplex GX270, on which
the volume is set by the headphone control, not the master control.
Signed-off-by: NChris Ball <cjb@mrao.cam.ac.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALI5451 driver

This patch uses #defines for the Vendor ID and Device ID and uses the
new PCI_DEVICE macro.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Trident driver

Some pcnet32 hardware erroneously has the Vendor ID for Trident.  The
pcnet32 driver looks for the PCI ethernet class before grabbing the
hardware, but the current trident driver does not check against the
PCI audio class.  This allows the trident driver to claim the pcnet32
hardware.  This patch prevents that.

Per Jiri Slaby's request, I changed the trident driver to use
PCI_DEVICE macro and PCI ID #defines.

This patch is untested on Trident 4DWAVE_DX hardware, but has been
tested on pcnet32 hardware.
Signed-off-by: NJon Mason <jdmason@us.ibm.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

On the Audigy 2 ZS, disable all sample rate that are not a multiple of
48 kHz because the others work only with the digital output which is
not yet supported.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: YMFPCI driver

Set the (read only) sample rate field in the IEC958 mixer controls to
48 kHz (instead of 44.1 kHz) because that is the rate actually
supported by the hardware.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: AC97 Codec

Fix CLFE channel setting of ALC850 (ALSA bug#1731).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CS5535 driver

Added AMD CS5536 to the cs5535audio driver.
Signed-off-by: NRene Rebe <rene@exactcode.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Some widespread USB interface chips with adaptive iso endpoints hang
after receiving a series of empty packets when they expect data (ALSA
bug#1585).  To avoid this, we have to send packets containing silence
(zero samples) instead.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: BT87x driver
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: AC97 Codec

Added a blacklist to suppress to create jack sense controls.
These controls must be always off on some devices (e.g. Thinkpad).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added an ALC260 model entry (basic) for Sony VAIO.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Digigram PCXHR driver

Fix the hardware set up when the sample rate is changed multiple times.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Intel driver

This patch adds the Intel ICH8 HD Audio DID to the hda_intel.c audio driver.
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: CA0106 driver

Description:
Shuttle XPC SD11G5 which has an onboard Creative Labs
Sound Blaster Live! 24-bit EAX
high-definition 7.1 audio processor'.
Fixes ALSA bug#1600
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: ALSA Core

Remove BKL from sound/core/info.c
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added a dxs_support entry for Jetway K8M8MS.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Fix the confliction of 'Front' controls on models with STAC9758 codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: BT87x driver

The patch siply adds the PCI IDs of AVerMedia Studio No. 103, 203,
and possibly even other versions with the same PCI IDs to the snd-bt87x
driver and sets its default sampling rate to 48 kHz.
Signed-off-by: NMartin Drab <drab@kepler.fjfi.cvut.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Fix silence problems on some boards after suspend/resume (bug#1674).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>