- 07 2月, 2012 7 次提交
-
-
由 Mitch A Williams 提交于
The existing ITR code is broken and confusing, with lots of similarly-named variables that do different things. Additionally, after the driver carefully determines the optimal interrupt rate for the adapter, it then ignores it and always writes a fixed, suboptimal value. This patch refactors that code to make variable names more descriptive of what they actually do, and then actually writes the calculated result to the hardware. Preliminary testing shows that netperf TCP_STREAM tests goes from ~918Mbps to ~940Mbps, and TCP_RR goes from ~2k transactions/sec up to > 8k. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David S. Miller 提交于
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside of other data structures. This is intended to be used by IPoIB so that it can remember addressing information stored at hard_header_ops->create() time that it can fetch when the packet gets to the transmit routine. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rtlwifi/rtl8192se/sw.c
-
由 Pradeep A Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pradeep A Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pradeep A Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2012 9 次提交
-
-
由 Michael Chan 提交于
When bnx2x returns error on FCoE SPQ messages, generate an error completion to bnx2fc immediately to speed up error recovery. This will eliminate length timeouts and spped up the reset of the device. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Zolotarov 提交于
Sync DMA descriptor before hitting the TX mailbox for weak memory model CPUs. There has been discussions several years ago about this. Some believe that writel() should guarantee ordering. Others want explicit barriers if necessary. Today writel() does not have the ordering guarantee and many other drivers use explicit barriers. Signed-off-by: NVlad Zolotarov <vlad@scalemp.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Allow the user to override the default number of RSS/TSS rings. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
The variable 'neigh' is assigned to, but otherwise completely unused. So let's remove it. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The memory has been allocated by kzalloc, so it's unnecessary to memset again. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The first assignment to variable "net" is wrong, but overridden by the latter assignments. So the bug isn't manifested. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2012 24 次提交
-
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Conflicts: drivers/net/can/usb/ems_usb.c Minor dev_warn --> netdev_warn conversion conflicts.
-
由 Masanari Iida 提交于
Correct spelling "reseting" to "resetting" in drivers/net/ethernet/mellanox/mlx4/cmd.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
It was recently pointed out to me that the get_prioidx function sets a bit in the prioidx map prior to checking to see if the index being set is out of bounds. This patch corrects that, avoiding the possiblity of us writing beyond the end of the array Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Reported-by: NStanislaw Gruszka <sgruszka@redhat.com> CC: Stanislaw Gruszka <sgruszka@redhat.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Cascading "if/else if"'s are ugly. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
VFs use get mac list command to get their mac address. The format of this command has changed. Update driver to use the new format. Signed-off-by: NMammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Version number in query link status command is getting overwritten in be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this issue. Also initialize the domain field. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Implement RX flip buffer in the cfhsi_rx_done function, piggy-backed frames is also supported. This gives a significant performance gain for CAIF over HSI. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Count dropped packets in CAIF Netdevice. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Kill off the debug-fs exposed varaibles from caif_socket. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
Check if firmware supports a particular command by first checking capability using devcmd CMD_CAPABILITY. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch enables support for multiple receive queues. If multiple receive queues are used ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max number of supported receive queues per vnic is 8. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Driver was leaking memory when page allocation failures occurs. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Log dump status. Remove unmatched qlcnic_api_unlock call. Update version to 5.0.26. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Check bits 8-28 of peg_halt status register for firmware abort code. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Report valid link statistics when link is down. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
When firmware hang is detected, fw should stop sending pause control frames. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
o Update version to 4.0.78 Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-