Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/driver-model/devres.txt

@@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer).
   6. List of managed interfaces
   -----------------------------
 
+MEM
+  devm_kzalloc()
+  devm_kfree()
+
 IO region
   devm_request_region()
   devm_request_mem_region()

Documentation/feature-removal-schedule.txt

@@ -510,3 +510,17 @@ Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
+
+----------------------------
+
+What:	The CAP9 SoC family will be removed
+When:	3.4
+Files:	arch/arm/mach-at91/at91cap9.c
+	arch/arm/mach-at91/at91cap9_devices.c
+	arch/arm/mach-at91/include/mach/at91cap9.h
+	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+	arch/arm/mach-at91/board-cap9adk.c
+Why:	The code is not actively maintained and platforms are now hard to find.
+Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
+	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Documentation/pinctrl.txt

@@ -857,42 +857,41 @@ case), we define a mapping like this:
 
 ...
 {
-	.name "2bit"
+	.name = "2bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
-	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_3_grp",
@@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true,
 like this:
 
 {
-	.name "POWERMAP"
+	.name = "POWERMAP"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "power_func",
 	.hog_on_boot = true,
@@ -1025,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
 
 foo_switch()
 {
-	struct pinmux pmx;
+	struct pinmux *pmx;
 
 	/* Enable on position A */
 	pmx = pinmux_get(&device, "spi0-pos-A");

Documentation/stable_kernel_rules.txt

@@ -25,7 +25,8 @@ Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
    stable@vger.kernel.org.  You must note the upstream commit ID in the
-   changelog of your submission.
+   changelog of your submission, as well as the kernel version you wish
+   it to be applied to.
  - To have the patch automatically included in the stable tree, add the tag
      Cc: stable@vger.kernel.org
    in the sign-off area. Once the patch is merged it will be applied to

Documentation/thermal/sysfs-api.txt

@@ -284,7 +284,7 @@ method, the sys I/F structure will be built like this:
 The framework includes a simple notification mechanism, in the form of a
 netlink event. Netlink socket initialization is done during the _init_
 of the framework. Drivers which intend to use the notification mechanism
-just need to call generate_netlink_event() with two arguments viz
+just need to call thermal_generate_netlink_event() with two arguments viz
 (originator, event). Typically the originator will be an integer assigned
 to a thermal_zone_device when it registers itself with the framework. The
 event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,

Documentation/virtual/00-INDEX

@@ -4,8 +4,6 @@ Virtualization support in the Linux kernel.
 	- this file.
 kvm/
 	- Kernel Virtual Machine.  See also http://linux-kvm.org
-lguest/
-	- Extremely simple hypervisor for experimental/educational use.
 uml/
 	- User Mode Linux, builds/runs Linux kernel as a userspace program.
 virtio.txt

MAINTAINERS

@@ -2351,6 +2351,9 @@ F:	include/drm/i915*
 
 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
+M:	Joonyoung Shim <jy0922.shim@samsung.com>
+M:	Seung-Woo Kim <sw0312.kim@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/exynos
@@ -2403,7 +2406,7 @@ F:	net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <kirkland@canonical.com>
+M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@@ -4138,6 +4141,7 @@ F:	fs/partitions/ldm.*
 
 LogFS
 M:	Joern Engel <joern@logfs.org>
+M:	Prasad Joshi <prasadjoshi.linux@gmail.com>
 L:	logfs@logfs.org
 W:	logfs.org
 S:	Maintained
@@ -4279,13 +4283,6 @@ S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
-MAX1668 TEMPERATURE SENSOR DRIVER
-M:	"David George" <david.george@ska.ac.za>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/max1668
-F:	drivers/hwmon/max1668.c
-
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
@@ -6676,7 +6673,7 @@ TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/tty/*
+F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
@@ -7369,6 +7366,7 @@ S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c

arch/arm/Kconfig

@@ -754,7 +754,7 @@ config ARCH_SA1100
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
@@ -825,7 +825,6 @@ config ARCH_S5PC100
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
@@ -842,7 +841,6 @@ config ARCH_S5PV210
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK

arch/arm/common/gic.c

@@ -41,6 +41,7 @@
 
 #include <asm/irq.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
@@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
 	void __iomem *base = gic_data_dist_base(gic);
-	u32 cpu = 0;
-
-#ifdef CONFIG_SMP
-	cpu = cpu_logical_map(smp_processor_id());
-#endif
+	u32 cpu = cpu_logical_map(smp_processor_id());
 
 	cpumask = 1 << cpu;
 	cpumask |= cpumask << 8;

arch/arm/include/asm/assembler.h

@@ -237,7 +237,7 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
 9999:
 	.if	\inc == 1
 	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
@@ -277,7 +277,7 @@
 
 #else	/* !CONFIG_THUMB2_KERNEL */
 
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
 	.rept	\rept
 9999:
 	.if	\inc == 1

arch/arm/include/asm/domain.h

@@ -83,9 +83,9 @@
  * instructions (inline assembly)
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	#instr "t"
+#define TUSER(instr)	#instr "t"
 #else
-#define T(instr)	#instr
+#define TUSER(instr)	#instr
 #endif
 
 #else /* __ASSEMBLY__ */
@@ -95,9 +95,9 @@
  * instructions
  */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	instr ## t
+#define TUSER(instr)	instr ## t
 #else
-#define T(instr)	instr
+#define TUSER(instr)	instr
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/arm/include/asm/futex.h

@@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 
 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%3]\n"			\
+	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%3]\n"			\
+	"2:	" TUSER(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
@@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
+	"1:	" TUSER(ldr) "	%1, [%4]\n"
 	"	teq	%1, %2\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
+	"2:	" TUSER(streq) "	%3, [%4]\n"
 	__futex_atomic_ex_table("%5")
 	: "+r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)

arch/arm/include/asm/smp.h

@@ -70,12 +70,6 @@ extern void platform_secondary_init(unsigned int cpu);
  */
 extern void platform_smp_prepare_cpus(unsigned int);
 
-/*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
-
 /*
  * Initial data for bringing up a secondary CPU.
  */

arch/arm/include/asm/smp_plat.h

@@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void)
 }
 #endif
 
+/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[];
+#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
+
 #endif

arch/arm/include/asm/uaccess.h

@@ -227,7 +227,7 @@ do {									\
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -263,7 +263,7 @@ do {									\
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -308,7 +308,7 @@ do {									\
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(strb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -341,7 +341,7 @@ do {									\
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(str) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -366,10 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
+ ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
+ THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
+ THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\

arch/arm/kernel/entry-common.S

@@ -149,6 +149,11 @@ ENDPROC(ret_from_fork)
 #endif
 #endif
 
+.macro mcount_adjust_addr rd, rn
+	bic	\rd, \rn, #1		@ clear the Thumb bit if present
+	sub	\rd, \rd, #MCOUNT_INSN_SIZE
+.endm
+
 .macro __mcount suffix
 	mcount_enter
 	ldr	r0, =ftrace_trace_function
@@ -173,8 +178,7 @@ ENDPROC(ret_from_fork)
 	mcount_exit
 
 1: 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 	adr	lr, BSYM(2f)
 	mov	pc, r2
 2:	mcount_exit
@@ -184,8 +188,7 @@ ENDPROC(ret_from_fork)
 	mcount_enter
 
 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 
 	.globl ftrace_call\suffix
 ftrace_call\suffix:
@@ -205,11 +208,11 @@ ftrace_graph_call\suffix:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
+	mcount_adjust_addr	r1, r1
 #else
 	@ called from __mcount, untouched in lr
-	mov	r1, lr			@ instrumented routine (func)
+	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	sub	r1, r1, #MCOUNT_INSN_SIZE
 	mov	r2, fp			@ frame pointer
 	bl	prepare_ftrace_return
 	mcount_exit

arch/arm/kernel/setup.c

@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -160,7 +159,7 @@ static struct resource mem_res[] = {
 		.flags = IORESOURCE_MEM
 	},
 	{
-		.name = "Kernel text",
+		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
 		.flags = IORESOURCE_MEM
@@ -427,6 +426,20 @@ void cpu_init(void)
 	    : "r14");
 }
 
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+	int i;
+	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+	cpu_logical_map(0) = cpu;
+	for (i = 1; i < NR_CPUS; ++i)
+		cpu_logical_map(i) = i == cpu ? 0 : i;
+
+	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;

arch/arm/kernel/smp.c

@@ -233,20 +233,6 @@ void __ref cpu_die(void)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
-	int i;
-	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
-	cpu_logical_map(0) = cpu;
-	for (i = 1; i < NR_CPUS; ++i)
-		cpu_logical_map(i) = i == cpu ? 0 : i;
-
-	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
 /*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
@@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
 static void ipi_timer(void)
 {
 	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-	irq_enter();
 	evt->event_handler(evt);
-	irq_exit();
 }
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
@@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 
 	switch (ipinr) {
 	case IPI_TIMER:
+		irq_enter();
 		ipi_timer();
+		irq_exit();
 		break;
 
 	case IPI_RESCHEDULE:
@@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		break;
 
 	case IPI_CALL_FUNC:
+		irq_enter();
 		generic_smp_call_function_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CALL_FUNC_SINGLE:
+		irq_enter();
 		generic_smp_call_function_single_interrupt();
+		irq_exit();
 		break;
 
 	case IPI_CPU_STOP:
+		irq_enter();
 		ipi_cpu_stop(cpu);
+		irq_exit();
 		break;
 
 	default:

arch/arm/kernel/smp_twd.c

@@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	else
 		twd_calibrate_rate();
 
+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 			CLOCK_EVT_FEAT_C3STOP;

arch/arm/kernel/vmlinux.lds.S

@@ -4,6 +4,7 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
@@ -181,7 +182,7 @@ SECTIONS
 	}
 #endif
 
-	PERCPU_SECTION(32)
+	PERCPU_SECTION(L1_CACHE_BYTES)
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
@@ -212,13 +213,13 @@ SECTIONS
 #endif
 
 		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(32)
-		READ_MOSTLY_DATA(32)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
 		 */
-		. = ALIGN(32);
+		. = ALIGN(4);
 		__start___ex_table = .;
 #ifdef CONFIG_MMU
 		*(__ex_table)

arch/arm/lib/getuser.S

@@ -31,18 +31,18 @@
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
-1:	T(ldrb)	r2, [r0]
+1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	T(ldrb)	r2, [r0]
-3:	T(ldrb)	r3, [r0, #1]
+2: TUSER(ldrb)	r2, [r0]
+3: TUSER(ldrb)	r3, [r0, #1]
 #else
-2:	T(ldrb)	r2, [r0], #1
-3:	T(ldrb)	r3, [r0]
+2: TUSER(ldrb)	r2, [r0], #1
+3: TUSER(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@@ -54,7 +54,7 @@ ENTRY(__get_user_2)
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-4:	T(ldr)	r2, [r0]
+4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)

arch/arm/lib/putuser.S

@@ -31,7 +31,7 @@
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
-1:	T(strb)	r2, [r0]
+1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@@ -40,19 +40,19 @@ ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0]
-3:	T(strb)	ip, [r0, #1]
+2: TUSER(strb)	r2, [r0]
+3: TUSER(strb)	ip, [r0, #1]
 #else
-2:	T(strb)	ip, [r0]
-3:	T(strb)	r2, [r0, #1]
+2: TUSER(strb)	ip, [r0]
+3: TUSER(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0], #1
-3:	T(strb)	ip, [r0]
+2: TUSER(strb)	r2, [r0], #1
+3: TUSER(strb)	ip, [r0]
 #else
-2:	T(strb)	ip, [r0], #1
-3:	T(strb)	r2, [r0]
+2: TUSER(strb)	ip, [r0], #1
+3: TUSER(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@@ -60,18 +60,18 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
-4:	T(str)	r2, [r0]
+4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	T(str)	r2, [r0]
-6:	T(str)	r3, [r0, #4]
+5: TUSER(str)	r2, [r0]
+6: TUSER(str)	r3, [r0, #4]
 #else
-5:	T(str)	r2, [r0], #4
-6:	T(str)	r3, [r0]
+5: TUSER(str)	r2, [r0], #4
+6: TUSER(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr

arch/arm/lib/uaccess.S

@@ -32,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned
 
@@ -59,7 +59,7 @@ ENTRY(__copy_to_user)
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -88,18 +88,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_not_enough:
@@ -120,7 +120,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -155,18 +155,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_2fupi:	subs	r2, r2, #4
@@ -175,7 +175,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -210,18 +210,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_3fupi:	subs	r2, r2, #4
@@ -230,7 +230,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -265,18 +265,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
@@ -295,11 +295,11 @@ ENDPROC(__copy_to_user)
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@@ -322,7 +322,7 @@ ENTRY(__copy_from_user)
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		T(ldr)	r3, [r1], #4)
+USER(	TUSER(	ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@@ -351,18 +351,18 @@ USER(		T(ldr)	r3, [r1], #4)
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		T(ldrne) r3, [r1], #4			@ Shouldnt fault
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -375,7 +375,7 @@ USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 
 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@@ -383,7 +383,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -418,7 +418,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -438,7 +438,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -474,7 +474,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -486,7 +486,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -494,7 +494,7 @@ USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -529,7 +529,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -539,9 +539,9 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)

arch/arm/mach-at91/Kconfig

@@ -18,6 +18,12 @@ config HAVE_AT91_USART4
 config HAVE_AT91_USART5
 	bool
 
+config AT91_SAM9_ALT_RESET
+	bool
+
+config AT91_SAM9G45_RESET
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -39,6 +45,7 @@ config ARCH_AT91SAM9260
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -46,6 +53,7 @@ config ARCH_AT91SAM9261
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
@@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
@@ -61,6 +70,7 @@ config ARCH_AT91SAM9263
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
@@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
@@ -96,6 +109,7 @@ config ARCH_AT91CAP9
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
 	bool "AT91x40"

arch/arm/mach-at91/Makefile

@@ -8,15 +8,17 @@ obj-n		:=
 obj-		:=
 
 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
+obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
+obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o

arch/arm/mach-at91/at91cap9.c

@@ -21,7 +21,6 @@
 #include <mach/cpu.h>
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 
 #include "soc.h"
 #include "generic.h"
@@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
 	}
 };
 
-static void at91cap9_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void)
 static void __init at91cap9_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
 }
 
 static void __init at91cap9_initialize(void)
 {
-	arm_pm_restart = at91cap9_restart;
+	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
 	/* Register GPIO subsystem */

arch/arm/mach-at91/at91sam9260.c

@@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void)
 static void __init at91sam9260_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }

arch/arm/mach-at91/at91sam9261.c

@@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void)
 static void __init at91sam9261_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }

arch/arm/mach-at91/at91sam9263.c

@@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void)
 static void __init at91sam9263_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);

arch/arm/mach-at91/at91sam9_alt_reset.S

@@ -23,7 +23,8 @@
 			.globl	at91sam9_alt_restart
 
 at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
-			ldr	r1, .at91_va_base_rstc_cr
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]
 
 			mov	r2, #1
 			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@@ -33,11 +34,9 @@ at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
 
 			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
 			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
-			str	r4, [r1]			@ reset processor
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
 
 			b	.
 
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
-.at91_va_base_rstc_cr:
-	.word AT91_VA_BASE_SYS + AT91_RSTC_CR

arch/arm/mach-at91/at91sam9g45.c

@@ -18,7 +18,6 @@
 #include <asm/mach/map.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 #include <mach/cpu.h>
 
 #include "soc.h"
@@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 	}
 };
 
-static void at91sam9g45_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void)
 static void __init at91sam9g45_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 }

arch/arm/mach-at91/at91sam9g45_reset.S

+/*
+ * reset AT91SAM9G45 as per errata
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * GPLv2 Only
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91_rstc.h>
+
+			.arm
+
+			.globl	at91sam9g45_restart
+
+at91sam9g45_restart:
+			ldr	r0, .at91_va_base_sdramc0	@ preload constants
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]
+
+			mov	r2, #1
+			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
+			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
+
+			.balign	32				@ align to cache line
+
+			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
+			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
+
+			b	.
+
+.at91_va_base_sdramc0:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0

arch/arm/mach-at91/at91sam9rl.c

@@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void)
 static void __init at91sam9rl_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }

arch/arm/mach-at91/generic.h

@@ -58,7 +58,9 @@ extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
 /* reset */
+extern void at91_ioremap_rstc(u32 base_addr);
 extern void at91sam9_alt_restart(char, const char *);
+extern void at91sam9g45_restart(char, const char *);
 
 /* shutdown */
 extern void at91_ioremap_shdwc(u32 base_addr);

arch/arm/mach-at91/include/mach/at91_rstc.h

@@ -16,13 +16,25 @@
 #ifndef AT91_RSTC_H
 #define AT91_RSTC_H
 
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_rstc_base;
+
+#define at91_rstc_read(field) \
+	__raw_readl(at91_rstc_base + field)
+
+#define at91_rstc_write(field, value) \
+	__raw_writel(value, at91_rstc_base + field);
+#else
+.extern at91_rstc_base
+#endif
+
+#define AT91_RSTC_CR		0x00			/* Reset Controller Control Register */
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
 #define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
 
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define AT91_RSTC_SR		0x04			/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
 #define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
 #define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
@@ -33,7 +45,7 @@
 #define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
 #define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
 
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define AT91_RSTC_MR		0x08			/* Reset Controller Mode Register */
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */

arch/arm/mach-at91/include/mach/at91cap9.h

@@ -83,7 +83,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
 			(0xfffffd50 - AT91_BASE_SYS) :	\
 			(0xfffffd60 - AT91_BASE_SYS))
@@ -96,6 +95,7 @@
 #define AT91CAP9_BASE_PIOB	0xfffff400
 #define AT91CAP9_BASE_PIOC	0xfffff600
 #define AT91CAP9_BASE_PIOD	0xfffff800
+#define AT91CAP9_BASE_RSTC	0xfffffd00
 #define AT91CAP9_BASE_SHDWC	0xfffffd10
 #define AT91CAP9_BASE_RTT	0xfffffd20
 #define AT91CAP9_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h

-/*
- * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- *
- *  (C) 2008 Andrew Victor
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL		0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_DDR		2
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-
-#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
-	at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
-	at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
-
-#endif

arch/arm/mach-at91/include/mach/at91sam9260.h

@@ -83,7 +83,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9260_BASE_ECC	0xffffe800
@@ -92,6 +91,7 @@
 #define AT91SAM9260_BASE_PIOA	0xfffff400
 #define AT91SAM9260_BASE_PIOB	0xfffff600
 #define AT91SAM9260_BASE_PIOC	0xfffff800
+#define AT91SAM9260_BASE_RSTC	0xfffffd00
 #define AT91SAM9260_BASE_SHDWC	0xfffffd10
 #define AT91SAM9260_BASE_RTT	0xfffffd20
 #define AT91SAM9260_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/at91sam9261.h

@@ -68,7 +68,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
 
 #define AT91SAM9261_BASE_SMC	0xffffec00
@@ -76,6 +75,7 @@
 #define AT91SAM9261_BASE_PIOA	0xfffff400
 #define AT91SAM9261_BASE_PIOB	0xfffff600
 #define AT91SAM9261_BASE_PIOC	0xfffff800
+#define AT91SAM9261_BASE_RSTC	0xfffffd00
 #define AT91SAM9261_BASE_SHDWC	0xfffffd10
 #define AT91SAM9261_BASE_RTT	0xfffffd20
 #define AT91SAM9261_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/at91sam9263.h

@@ -78,7 +78,6 @@
 #define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9263_BASE_ECC0	0xffffe000
@@ -91,6 +90,7 @@
 #define AT91SAM9263_BASE_PIOC	0xfffff600
 #define AT91SAM9263_BASE_PIOD	0xfffff800
 #define AT91SAM9263_BASE_PIOE	0xfffffa00
+#define AT91SAM9263_BASE_RSTC	0xfffffd00
 #define AT91SAM9263_BASE_SHDWC	0xfffffd10
 #define AT91SAM9263_BASE_RTT0	0xfffffd20
 #define AT91SAM9263_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h

@@ -46,10 +46,10 @@
 #define			AT91_DDRSDRC_CAS_25	(6 << 4)
 #define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
-#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
-#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
-#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL [SAM9 Only] */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver [SAM9 Only] */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared [SAM9 Only] */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
 
 #define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
@@ -59,7 +59,8 @@
 #define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
 #define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
 #define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91CAP9_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
 #define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
@@ -68,13 +69,14 @@
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register [SAM9 Only] */
 #define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
 #define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
 #define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
 #define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
 
 #define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define AT91CAP9_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -92,32 +94,40 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define AT91CAP9_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91CAP9_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-#define			AT91_DDRSDRC_MD_DDR2		6
+#define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
 #define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
 
 #define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define AT91CAP9_DDRSDRC_DLL	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91CAP9_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91CAP9_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91CAP9_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
 #define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91CAP9_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91CAP9_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
-#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
 #define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
 
 #define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
 
-#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
 #define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
 #define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
 
-#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
 #define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
 

arch/arm/mach-at91/include/mach/at91sam9g45.h

@@ -90,7 +90,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9G45_BASE_ECC	0xffffe200
@@ -102,6 +101,7 @@
 #define AT91SAM9G45_BASE_PIOC	0xfffff600
 #define AT91SAM9G45_BASE_PIOD	0xfffff800
 #define AT91SAM9G45_BASE_PIOE	0xfffffa00
+#define AT91SAM9G45_BASE_RSTC	0xfffffd00
 #define AT91SAM9G45_BASE_SHDWC	0xfffffd10
 #define AT91SAM9G45_BASE_RTT	0xfffffd20
 #define AT91SAM9G45_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/at91sam9rl.h

@@ -72,7 +72,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
@@ -84,6 +83,7 @@
 #define AT91SAM9RL_BASE_PIOB	0xfffff600
 #define AT91SAM9RL_BASE_PIOC	0xfffff800
 #define AT91SAM9RL_BASE_PIOD	0xfffffa00
+#define AT91SAM9RL_BASE_RSTC	0xfffffd00
 #define AT91SAM9RL_BASE_SHDWC	0xfffffd10
 #define AT91SAM9RL_BASE_RTT	0xfffffd20
 #define AT91SAM9RL_BASE_PIT	0xfffffd30

arch/arm/mach-at91/include/mach/board.h

@@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data);
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
 	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_inverted;
+	u8              vbus_pin_active_low[2];
 	u8              overcurrent_supported;
 	int             overcurrent_pin[2];
 	u8              overcurrent_status[2];

arch/arm/mach-at91/pm.c

@@ -34,7 +34,6 @@
 /*
  * Show the reason for the previous system reset.
  */
-#if defined(AT91_RSTC)
 
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
@@ -58,10 +57,10 @@ static void __init show_reset_status(void)
 	char *reason, *r2 = reset;
 	u32 reset_type, wake_type;
 
-	if (!at91_shdwc_base)
+	if (!at91_shdwc_base || !at91_rstc_base)
 		return;
 
-	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
+	reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
 	wake_type = at91_shdwc_read(AT91_SHDW_SR);
 
 	switch (reset_type) {
@@ -102,10 +101,6 @@ static void __init show_reset_status(void)
 	}
 	pr_info("AT91: Starting after %s %s\n", reason, r2);
 }
-#else
-static void __init show_reset_status(void) {}
-#endif
-
 
 static int at91_pm_valid_state(suspend_state_t state)
 {

arch/arm/mach-at91/pm.h

@@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void)
 								: : "r" (0))
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
+#include <mach/at91sam9_ddrsdr.h>
 
 
 static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
 #define wait_for_interrupt_enable()		cpu_do_idle()
 
 #elif defined(CONFIG_ARCH_AT91SAM9G45)

arch/arm/mach-at91/pm_slowclock.S

@@ -18,9 +18,8 @@
 
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>

arch/arm/mach-at91/setup.c

@@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata);
 void __init at91rm9200_set_type(int type)
 {
 	if (type == ARCH_REVISON_9200_PQFP)
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-	else
 		at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
+	else
+		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
+
+	pr_info("AT91: filled in soc subtype: %s\n",
+		at91_get_soc_subtype(&at91_soc_initdata));
 }
 
 void __init at91_init_irq_default(void)
@@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr)
 	pm_power_off = at91sam9_poweroff;
 }
 
+void __iomem *at91_rstc_base;
+
+void __init at91_ioremap_rstc(u32 base_addr)
+{
+	at91_rstc_base = ioremap(base_addr, 16);
+	if (!at91_rstc_base)
+		panic("Impossible to ioremap at91_rstc_base\n");
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
 	at91_boot_soc.ioremap_registers();

arch/arm/mach-exynos/hotplug.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 #include <mach/regs-pmu.h>
 

arch/arm/mach-exynos/platsmp.c

@@ -23,6 +23,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
 #include <mach/hardware.h>

arch/arm/mach-highbank/highbank.c

@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
@@ -72,9 +73,7 @@ static void __init highbank_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-#ifdef CONFIG_SMP
 	cpu = cpu_logical_map(cpu);
-#endif
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-imx/Kconfig

@@ -87,7 +87,6 @@ config SOC_IMX35
 
 config SOC_IMX5
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2

arch/arm/mach-imx/clock-imx6q.c

@@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
 DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
 DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
 
+static unsigned long twd_clk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk twd_clk = {
+	.parent = &arm_clk,
+	.get_rate = twd_clk_get_rate,
+};
+
 static unsigned long pll2_200m_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
@@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
 	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
 	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+	_REGISTER_CLOCK("smp_twd", NULL, twd_clk),
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
 	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
 	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),

arch/arm/mach-imx/mach-mx53_ard.c

@@ -188,8 +188,10 @@ static int weim_cs_config(void)
 		return -ENOMEM;
 
 	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base)
+	if (!iomuxc_base) {
+		iounmap(weim_base);
 		return -ENOMEM;
+	}
 
 	/* CS1 timings for LAN9220 */
 	writel(0x20001, (weim_base + 0x18));

arch/arm/mach-imx/src.c

@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
+#include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
@@ -24,10 +25,6 @@
 
 static void __iomem *src_base;
 
-#ifndef CONFIG_SMP
-#define cpu_logical_map(cpu)		0
-#endif
-
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;

arch/arm/mach-msm/hotplug.c

@@ -11,6 +11,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-msm/platsmp.c

@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
+#include <asm/smp_plat.h>
 
 #include <mach/msm_iomap.h>
 

arch/arm/mach-omap2/Kconfig

@@ -33,7 +33,6 @@ config ARCH_OMAP3
 	default y
 	select CPU_V7
 	select USB_ARCH_HAS_EHCI
-	select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM

arch/arm/mach-pxa/devices.c

@@ -415,29 +415,9 @@ static struct resource pxa_rtc_resources[] = {
 	},
 };
 
-static struct resource sa1100_rtc_resources[] = {
-	[0] = {
-		.start  = 0x40900000,
-		.end	= 0x409000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
 struct platform_device sa1100_device_rtc = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.num_resources  = ARRAY_SIZE(sa1100_rtc_resources),
-	.resource       = sa1100_rtc_resources,
 };
 
 struct platform_device pxa_device_rtc = {

arch/arm/mach-pxa/pxa25x.c

@@ -209,8 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =

arch/arm/mach-pxa/pxa27x.c

@@ -230,8 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 #ifdef CONFIG_PM

arch/arm/mach-pxa/pxa300.c

@@ -89,7 +89,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);

arch/arm/mach-pxa/pxa320.c

@@ -83,7 +83,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 };
 
 static int __init pxa320_init(void)

arch/arm/mach-pxa/pxa3xx.c

@@ -67,7 +67,6 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

arch/arm/mach-pxa/pxa95x.c

@@ -217,7 +217,6 @@ static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
 	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
 	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),

arch/arm/mach-realview/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-realview/include/mach/board-eb.h

@@ -47,21 +47,23 @@
 #define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
 
 #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x10100600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
 #else
-#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	0x1F000600
-#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
 #define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
+#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
+#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
+
+#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
+#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
+
 /*
  * Core tile identification (REALVIEW_SYS_PROCID)
  */

arch/arm/mach-realview/include/mach/board-pb11mp.h

@@ -75,6 +75,8 @@
 /*
  * Testchip peripheral and fpga gic regions
  */
+#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
+#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
 #define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
 #define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
 #define REALVIEW_TC11MP_TWD_BASE		0x1F000600

arch/arm/mach-realview/realview_eb.c

@@ -91,14 +91,9 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 
 static struct map_desc realview_eb11mp_io_desc[] __initdata = {
 	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),

arch/arm/mach-realview/realview_pb11mp.c

@@ -64,15 +64,10 @@ static struct map_desc realview_pb11mp_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
+		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),

arch/arm/mach-sa1100/assabet.c

@@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = {
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init assabet_init(void)
@@ -253,17 +252,6 @@ static void __init assabet_init(void)
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	sa11x0_register_mcp(&assabet_mcp_data);
 }
 

arch/arm/mach-sa1100/cerf.c

@@ -124,23 +124,12 @@ static void __init cerf_map_io(void)
 static struct mcp_plat_data cerf_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&cerf_mcp_data);
 }
 

arch/arm/mach-sa1100/clock.c

@@ -11,39 +11,17 @@
 #include <linux/clk.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-};
-
+/*
+ * Very simple clock implementation - we only have one clock to deal with.
+ */
 struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
 	unsigned int		enabled;
 };
 
-#define INIT_CLKREG(_clk, _devname, _conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.rate	= _rate,			\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void clk_gpio27_enable(struct clk *clk)
+static void clk_gpio27_enable(void)
 {
 	/*
 	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -54,22 +32,38 @@ static void clk_gpio27_enable(struct clk *clk)
 	TUCR = TUCR_3_6864MHz;
 }
 
-static void clk_gpio27_disable(struct clk *clk)
+static void clk_gpio27_disable(void)
 {
 	TUCR = 0;
 	GPDR &= ~GPIO_32_768kHz;
 	GAFR &= ~GPIO_32_768kHz;
 }
 
+static struct clk clk_gpio27;
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	const char *devname = dev_name(dev);
+
+	return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
+		clk_gpio27_enable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
@@ -82,48 +76,13 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clocks_lock, flags);
 	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
+		clk_gpio27_disable();
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
+	return 3686400;
 }
 EXPORT_SYMBOL(clk_get_rate);
-
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk) { }
-static void clk_dummy_disable(struct clk *clk) { }
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400);
-static DEFINE_CLK(dummy, &clk_dummy_ops, 0);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
-	return 0;
-}
-
-postcore_initcall(sa11xx_clk_init);

arch/arm/mach-sa1100/collie.c

@@ -27,7 +27,6 @@
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
-static struct ucb1x00_plat_data collie_ucb1x00_data = {
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
-};
-
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.codec		= "ucb1x00",
-	.codec_pdata	= &collie_ucb1x00_data,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
 };
 
 /*
@@ -144,8 +138,6 @@ static struct pda_power_pdata collie_power_data = {
 static struct resource collie_power_resource[] = {
 	{
 		.name		= "ac",
-		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
-		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
 		.flags		= IORESOURCE_IRQ |
 				  IORESOURCE_IRQ_HIGHEDGE |
 				  IORESOURCE_IRQ_LOWEDGE,
@@ -347,7 +339,8 @@ static void __init collie_init(void)
 
 	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
 
-
+	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
+	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
 	platform_scoop_config = &collie_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -357,16 +350,6 @@ static void __init collie_init(void)
 
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();

arch/arm/mach-sa1100/cpu-sa1100.c

@@ -228,7 +228,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_driver sa1100_driver = {
+static struct cpufreq_driver sa1100_driver __refdata = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= sa11x0_verify_speed,
 	.target		= sa1100_target,

arch/arm/mach-sa1100/generic.c

@@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = {
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0x1C - 1,
+		.end	= __PREG(Ser4MCCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= __PREG(Ser4MCCR1),
-		.end	= __PREG(Ser4MCCR1) + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
 		.start	= IRQ_Ser4MCP,
 		.end	= IRQ_Ser4MCP,
 		.flags	= IORESOURCE_IRQ,
@@ -350,29 +345,9 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
-static struct resource sa11x0rtc_resources[] = {
-	[0] = {
-		.start	= 0x90010000,
-		.end	= 0x900100ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_RTC1Hz,
-		.end	= IRQ_RTC1Hz,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_RTCAlrm,
-		.end	= IRQ_RTCAlrm,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
 static struct platform_device sa11x0rtc_device = {
 	.name		= "sa1100-rtc",
 	.id		= -1,
-	.resource	= sa11x0rtc_resources,
-	.num_resources	= ARRAY_SIZE(sa11x0rtc_resources),
 };
 
 static struct platform_device *sa11x0_devices[] __initdata = {

arch/arm/mach-sa1100/include/mach/mcp.h

@@ -17,8 +17,6 @@ struct mcp_plat_data {
 	u32 mccr1;
 	unsigned int sclk_rate;
 	int gpio_base;
-	const char *codec;
-	void *codec_pdata;
 };
 
 #endif

arch/arm/mach-sa1100/jornada720_ssp.c

@@ -198,3 +198,5 @@ static int __init jornada_ssp_init(void)
 {
 	return platform_driver_register(&jornadassp_driver);
 }
+
+module_init(jornada_ssp_init);

arch/arm/mach-sa1100/lart.c

@@ -24,20 +24,10 @@
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init lart_init(void)
 {
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 

arch/arm/mach-sa1100/shannon.c

@@ -55,22 +55,11 @@ static struct resource shannon_flash_resource = {
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
 

arch/arm/mach-sa1100/simpad.c

@@ -14,7 +14,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -188,15 +187,10 @@ static struct resource simpad_flash_resources [] = {
 	}
 };
 
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1300",
-	.codec_pdata	= &simpad_ucb1x00_data,
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
 };
 
 
@@ -384,16 +378,6 @@ static int __init simpad_init(void)
 
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&simpad_mcp_data);
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <mach/common.h>
 #include <mach/r8a7779.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -23,6 +23,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>

arch/arm/mach-ux500/Kconfig

@@ -7,6 +7,7 @@ config UX500_SOC_COMMON
 	select HAS_MTU
 	select ARM_ERRATA_753970
 	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369
 
 menu "Ux500 SoC"
 

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -261,6 +261,8 @@ void __init mop500_sdi_init(void)
 
 void __init snowball_sdi_init(void)
 {
+	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
+	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
 	/* On-board eMMC */
 	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */

arch/arm/mach-ux500/cache-l2x0.c

@@ -12,44 +12,6 @@
 
 static void __iomem *l2x0_base;
 
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
-	/* wait for the operation to complete */
-	while (readl_relaxed(reg) & mask)
-		cpu_relax();
-}
-
-static inline void ux500_cache_sync(void)
-{
-	writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
-	ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
-	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
-
-	/* invalidate all ways */
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
-	ux500_cache_sync();
-}
-
 static int __init ux500_l2x0_unlock(void)
 {
 	int i;
@@ -85,9 +47,13 @@ static int __init ux500_l2x0_init(void)
 	/* 64KB way size, 8 way associativity, force WA */
 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
-	/* Override invalidate function */
-	outer_cache.disable = ux500_l2x0_disable;
-	outer_cache.inv_all = ux500_l2x0_inv_all;
+	/*
+	 * We can't disable l2 as we are in non secure mode, currently
+	 * this seems be called only during kexec path. So let's
+	 * override outer.disable with nasty assignment until we have
+	 * some SMI service available.
+	 */
+	outer_cache.disable = NULL;
 
 	return 0;
 }

arch/arm/mach-ux500/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 
 extern volatile int pen_release;
 

arch/arm/mach-ux500/platsmp.c

@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>

arch/arm/mach-ux500/usb.c

@@ -95,13 +95,7 @@ static struct musb_hdrc_config musb_hdrc_config = {
 };
 
 static struct musb_hdrc_platform_data musb_platform_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
 	.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
-	.mode = MUSB_HOST,
-#endif
 	.config = &musb_hdrc_config,
 	.board_data = &musb_board_data,
 };

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -217,7 +217,7 @@ static void __init ct_ca9x4_init(void)
 }
 
 #ifdef CONFIG_SMP
-static void ct_ca9x4_init_cpu_map(void)
+static void __init ct_ca9x4_init_cpu_map(void)
 {
 	int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
 
@@ -233,7 +233,7 @@ static void ct_ca9x4_init_cpu_map(void)
 	set_smp_cross_call(gic_raise_softirq);
 }
 
-static void ct_ca9x4_smp_enable(unsigned int max_cpus)
+static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
 {
 	scu_enable(MMIO_P2V(A9_MPCORE_SCU));
 }

arch/arm/mach-vexpress/hotplug.c

@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/system.h>
 
 extern volatile int pen_release;

arch/arm/mm/Kconfig

@@ -882,6 +882,7 @@ config CACHE_XSC3L2
 
 config ARM_L1_CACHE_SHIFT_6
 	bool
+	default y if CPU_V7
 	help
 	  Setting ARM L1 cache line size to 64 Bytes.
 

arch/arm/mm/init.c

@@ -310,7 +310,7 @@ static void arm_memory_present(void)
 
 static bool arm_memblock_steal_permitted = true;
 
-phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align)
+phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 {
 	phys_addr_t phys;
 

arch/arm/mm/ioremap.c

@@ -225,7 +225,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
 			continue;
 		if (__phys_to_pfn(area->phys_addr) > pfn ||
-		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
+		    __pfn_to_phys(pfn) + offset + size-1 >
+		    area->phys_addr + area->size-1)
 			continue;
 		/* we can drop the lock here as we know *area is static */
 		read_unlock(&vmlist_lock);

arch/arm/mm/proc-v7.S

@@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume)
  *	Initialise TLB, Caches, and MMU state ready to switch the MMU
  *	on.  Return in r0 the new CP15 C1 control register setting.
  *
- *	We automatically detect if we have a Harvard cache, and use the
- *	Harvard cache control instructions insead of the unified cache
- *	control instructions.
- *
  *	This should be able to cover all ARMv7 cores.
  *
  *	It is assumed that:
@@ -251,9 +247,7 @@ __v7_setup:
 #endif
 
 3:	mov	r10, #0
-#ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-#endif
 	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
@@ -329,16 +323,6 @@ __v7_ca5mp_proc_info:
 	__v7_proc __v7_ca5mp_setup
 	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
 
-	/*
-	 * ARM Ltd. Cortex A7 processor.
-	 */
-	.type	__v7_ca7mp_proc_info, #object
-__v7_ca7mp_proc_info:
-	.long	0x410fc070
-	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
-	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
-
 	/*
 	 * ARM Ltd. Cortex A9 processor.
 	 */
@@ -350,6 +334,16 @@ __v7_ca9mp_proc_info:
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
 #endif	/* CONFIG_ARM_LPAE */
 
+	/*
+	 * ARM Ltd. Cortex A7 processor.
+	 */
+	.type	__v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+	.long	0x410fc070
+	.long	0xff0ffff0
+	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
 	/*
 	 * ARM Ltd. Cortex A15 processor.
 	 */

arch/arm/plat-mxc/include/mach/iomux-v1.h

@@ -96,6 +96,6 @@ extern int mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label);
 
-extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
+extern int imx_iomuxv1_init(void __iomem *base, int numports);
 
 #endif /* __MACH_IOMUX_V1_H__ */

arch/arm/plat-versatile/platsmp.c

@@ -16,6 +16,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
 #include <asm/hardware/gic.h>
 
 /*

arch/m68k/atari/config.c

@@ -414,9 +414,9 @@ void __init config_atari(void)
 					 * FDC val = 4 -> Supervisor only */
 		asm volatile ("\n"
 			"	.chip	68030\n"
-			"	pmove	%0@,%/tt1\n"
+			"	pmove	%0,%/tt1\n"
 			"	.chip	68k"
-			: : "a" (&tt1_val));
+			: : "m" (tt1_val));
 	} else {
 	        asm volatile ("\n"
 			"	.chip	68040\n"
@@ -569,10 +569,10 @@ static void atari_reset(void)
 			: "d0");
 	} else
 		asm volatile ("\n"
-			"	pmove	%0@,%%tc\n"
+			"	pmove	%0,%%tc\n"
 			"	jmp	%1@"
 			: /* no outputs */
-			: "a" (&tc_val), "a" (reset_addr));
+			: "m" (tc_val), "a" (reset_addr));
 }
 
 

arch/m68k/include/asm/irq.h

@@ -50,19 +50,6 @@
 
 #define IRQ_USER	8
 
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
-#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
-#define IRQ_FLG_FAST	(0x0004)
-#define IRQ_FLG_SLOW	(0x0008)
-#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
-#endif
-
 struct irq_data;
 struct irq_chip;
 struct irq_desc;

arch/m68k/kernel/process_mm.c

@@ -172,7 +172,7 @@ void flush_thread(void)
 
 	current->thread.fs = __USER_DS;
 	if (!FPU_IS_EMU)
-		asm volatile ("frestore %0@" : : "a" (&zero) : "memory");
+		asm volatile("frestore %0": :"m" (zero));
 }
 
 /*