Using this helper allows us to avoid the in-kernel calls to the
sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_mmap_pgoff().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are going to split more MM APIs out of <linux/sched.h>, which
will have to be picked up from a couple of .c files.

The APIs that we are going to move are:

  arch_pick_mmap_layout()
  arch_get_unmapped_area()
  arch_get_unmapped_area_topdown()
  mm_update_next_owner()

Include the header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix following warnings:
sys_sparc_32.c:32:26: warning: symbol 'sys_getpagesize' was not declared. Should it be static?
sys_sparc_32.c:71:16: warning: symbol 'sparc_pipe' was not declared. Should it be static?
sys_sparc_32.c:96:26: warning: symbol 'sys_mmap2' was not declared. Should it be static?
sys_sparc_32.c:106:26: warning: symbol 'sys_mmap' was not declared. Should it be static?
sys_sparc_32.c:114:6: warning: symbol 'sparc_remap_file_pages' was not declared. Should it be static?
sys_sparc_32.c:127:1: warning: symbol 'c_sys_nis_syscall' was not declared. Should it be static?
sys_sparc_32.c:144:1: warning: symbol 'sparc_breakpoint' was not declared. Should it be static?
sys_sparc_32.c:200:16: warning: symbol 'sys_getdomainname' was not declared. Should it be static?

Adapt systbls.h for use by both sparc32 + sparc64.
In the process modify the return type of a few functions.

Change return type from unsigned long to long:
sys_mmap2()
sys_mmap()

Change return type from int to long:
sparc_pipe()
sys_getdomainname()

The changed return type was done to align with sparc64.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

note that due to historical accident we do *not* directly take
generic versions - need to check and invert the sign of signal
number first.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

	Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite
(!CONFIG_ODD_RT_SIGACTION); the only two architectures that
need it are alpha and sparc.  The reason for use of CONFIG_...
instead of __ARCH_... is that it's needed only kernel-side
and doing it that way avoids a mess with include order on many
architectures.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Update the sparc32 arch_get_unmapped_area function to make use of
vm_unmapped_area() instead of implementing a brute force search.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: remove now-unused COLOUR_ALIGN()]
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It used to be true, until 2.1.78 (14 years ago) when we switched to
do_sigaction()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

They were all bogus artifacts and completely unnecessary.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a generic implementation of the ipc demultiplexer syscall.  Except for
s390 and sparc64 all implementations of the sys_ipc are nearly identical.

There are slight differences in the types of the parameters, where mips
and powerpc as the only 64-bit architectures with sys_ipc use unsigned
long for the "third" argument as it gets casted to a pointer later, while
it traditionally is an "int" like most other paramters.  frv goes even
further and uses unsigned long for all parameters execept for "ptr" which
is a pointer type everywhere.  The change from int to unsigned long for
"third" and back to "int" for the others on frv should be fine due to the
in-register calling conventions for syscalls (we already had a similar
issue with the generic sys_ptrace), but I'd prefer to have the arch
maintainers looks over this in details.

Except for that h8300, m68k and m68knommu lack an impplementation of the
semtimedop sub call which this patch adds, and various architectures have
gets used - at least on i386 it seems superflous as the compat code on
x86-64 and ia64 doesn't even bother to implement it.

[akpm@linux-foundation.org: add sys_ipc to sys_ni.c]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want addr - (pgoff << PAGE_SHIFT) consistently coloured...
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

the checks it's doing are duplicated in sys_brk() and failing
them early makes no sense, AFAICT.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

New helper - sys_mmap_pgoff(); switch syscalls to using it.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

o sparc32 files with identical names to sparc64 renamed to <name>_32.S
o introduced a few Kconfig helpers to simplify Makefile logic
o refactored Makefile to prepare for unification
  - use obj-$(CONFIG_SPARC32) for sparc32 specific files
  - use <name>_$(BITS) for files where sparc64 has a _64 variant
  - sparc64 directly include a few files where sparc32 builds them,
    refer to these files directly (no BITS)
  - sneaked in -Werror as used by sparc64
o modified sparc/Makefile to use the new names for head/init_task
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While doing some easy cleanups on the sparc code I noticed that the
CONFIG_SUN4 code seems to be worse than the rest - there were some
"I don't know how it should work, but the current code definitely cannot
work." places.

And while I have seen people running Linux on machines like a
SPARCstation 5 a few years ago I don't recall having seen sun4
machines, even less ones running Linux.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value.  This patch implements
the handling of O_CLOEXEC for the flag.  I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation.  I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.

The implementation introduces do_pipe_flags.  I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code.  To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fd[2];
  if (syscall (__NR_pipe2, fd, 0) != 0)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
    {
      puts ("pipe2(O_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just like mmap, we need to validate address ranges regardless
of MAP_FIXED.

sparc{,64}_mmap_check()'s flag argument is unused, remove.

Based upon a report and preliminary patch by
Jan Lieskovsky <jlieskov@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not conditionalize VA range checks on MAP_FIXED.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Back around the same time we were bootstrapping the first 32-bit sparc
Linux kernel with a SunOS userland, we made the signal frame match
that of SunOS.

By the time we even started putting together a native Linux userland
for 32-bit Sparc we realized this layout wasn't sufficient for Linux's
needs.

Therefore we changed the layout, yet kept support for the old style
signal frame layout in there.  The detection mechanism is that we had
sys_sigaction() start passing in a negative signal number to indicate
"new style signal frames please".

Anyways, no binaries exist in the world that use the old stuff.  In
fact, I bet Jakub Jelinek and myself are the only two people who ever
had such binaries to be honest.

So let's get rid of this stuff.

I added an assertion using WARN_ON_ONCE() that makes sure 32-bit
applications are passing in that negative signal number still.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of the easiest things to isolate is the pid printed in kernel log.
There was a patch, that made this for arch-independent code, this one makes
so for arch/xxx files.

It took some time to cross-compile it, but hopefully these are all the
printks in arch code.
Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All asm/ipc.h files do only #include <asm-generic/ipc.h>.

This patch therefore removes all include/asm-*/ipc.h files and moves the
contents of include/asm-generic/ipc.h to include/linux/ipc.h.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds the new kernel_execve function on all architectures that were using
_syscall3() to implement execve.

The implementation uses code from the _syscall3 macros provided in the
unistd.h header file.  I don't have cross-compilers for any of these
architectures, so the patch is untested with the exception of i386.

Most architectures can probably implement this in a nicer way in assembly or
by combining it with the sys_execve implementation itself, but this should do
it for now.

[bunk@stusta.de: m68knommu build fix]
[markh@osdl.org: build fix]
[bero@arklinux.org: build fix]
[ralf@linux-mips.org: mips fix]
[schwidefsky@de.ibm.com: s390 fix]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NBernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace references to system_utsname to the per-process uts namespace
where appropriate.  This includes things like uname.

Changes: Per Eric Biederman's comments, use the per-process uts namespace
	for ELF_PLATFORM, sunrpc, and parts of net/ipv4/ipconfig.c

[jdike@addtoit.com: UML fix]
[clg@fr.ibm.com: cleanup]
[akpm@osdl.org: build fix]
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch corrects the buffer length checking in the
sys_getdomainname() implementation for sparc/sparc64.
Signed-off-by: NAndy Walker <andy@puszczka.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This prevents cross-region mappings on IA64 and SPARC which could lead
to system crash.  They were correctly trapped for normal mmap() calls,
but not for the kernel internal calls generated by executable loading.

This code just moves the architecture-specific cross-region checks into
an arch-specific "arch_mmap_check()" macro, and defines that for the
architectures that needed it (ia64, sparc and sparc64).

Architectures that don't have any special requirements can just ignore
the new cross-region check, since the mmap() code will just notice on
its own when the macro isn't defined.
Signed-off-by: NPavel Emelianov <xemul@openvz.org>
Signed-off-by: NKirill Korotaev <dev@openvz.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
[ Cleaned up to not affect architectures that don't need it ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Found by scrashme.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!