- 08 8月, 2008 1 次提交
-
-
pci.ids.h: remove a duplicated symbol Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: NGrant Coady <gcoady.lk@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 27 7月, 2008 1 次提交
-
-
由 Karsten Keil 提交于
Enable support for cards with Cologne Chip AG's HFC multiport chip. Signed-off-by: NKarsten Keil <kkeil@suse.de>
-
- 26 7月, 2008 1 次提交
-
-
由 Arthur Jones 提交于
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: NArthur Jones <ajones@riverbed.com> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 7月, 2008 1 次提交
-
-
由 Stefan Richter 提交于
Isochronous reception in dualbuffer mode is reportedly broken with TI TSB43AB22A on x86-64. Descriptor addresses above 2G have been determined as the trigger: https://bugzilla.redhat.com/show_bug.cgi?id=435550 Two fixes are possible: - pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK); at least when IR descriptors are allocated, or - simply don't use dualbuffer. This fix implements the latter workaround. But we keep using dualbuffer on x86-32 which won't give us highmen (and thus physical addresses outside the 31bit range) in coherent DMA memory allocations. Right now we could for example also whitelist PPC32, but DMA mapping implementation details are expected to change there. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NJarod Wilson <jwilson@redhat.com>
-
- 23 7月, 2008 1 次提交
-
-
由 Maciej Sosnowski 提交于
This patch adds to ioatdma and dca modules support for Intel I/OAT DMA engine ver.3 (aka CB3 device). The main features of I/OAT ver.3 are: * 8 single channel DMA devices (8 channels total) * 8 DCA providers, each can accept 2 requesters * 8-bit TAG values and 32-bit extended APIC IDs Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 15 7月, 2008 1 次提交
-
-
由 Pierre Ossman 提交于
JMicron chips sometimes have two interfaces to work around limitations in Microsoft's sdhci driver. This patch allows us to use either interface. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
- 14 7月, 2008 1 次提交
-
-
由 Kumar Gala 提交于
Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 05 7月, 2008 1 次提交
-
-
由 Andres Salomon 提交于
This has been sitting around unloved for way too long.. The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps. It also adds an entry to pci_ids.h for the CaFe chip's SD device. Signed-off-by: NAndres Salomon <dilinger@debian.org> Cc: Pierre Ossman <drzeus-list@drzeus.cx> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 6月, 2008 1 次提交
-
-
由 Eilon Greenstein 提交于
Supporting the 57711 and 57711E - refers to in the code as E1H. The 57710 is referred to as E1. To support the new members in the family, the bnx2x structure was divided to 3 parts: common, port and function. These changes caused some rearrangement in the bnx2x.h file. A set of accessories macros were added to make access to the bnx2x structure more readable Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2008 1 次提交
-
-
由 Mike Miller 提交于
Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: NMike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 5月, 2008 1 次提交
-
-
由 Matt Carlson 提交于
This patch added the 5785 device ID and ASIC revision to the code. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2008 2 次提交
-
-
由 Ignacio García Pérez 提交于
Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: NIgnacio García Pérez <iggarpe@t2i.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Minor rework to support the Intel 5400 chipset. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 5月, 2008 1 次提交
-
-
由 Scott Kilau 提交于
Add new PCI Express Neo/JSM board to the supported list of drivers in the JSM driver. Signed-off-by: NScott Kilau <scottk@digi.com> Acked-by: NAnanda V <avenkat@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 4月, 2008 1 次提交
-
-
由 Alek Du 提交于
This patch adds Intel SCH chipsets (US15W, US15L, UL11L) PCI IDs, these IDs will be used by following SCH driver patches. Signed-off-by: NAlek Du <alek.du@intel.com> Signed-off-by: NJesse Barnes <jbarnes@jbarnes-t61.(none)>
-
- 11 3月, 2008 1 次提交
-
-
由 Alex Dubov 提交于
Signed-off-by: NAlex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2008 1 次提交
-
-
由 Jason Gaston 提交于
This patch adds the Intel ICH10 LPC and SMBus Controller DeviceID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 19 2月, 2008 1 次提交
-
-
由 Andrew Smith 提交于
[bart: manually ported it over via82cxxx changes] From: Andrew Smith <asmith@tranquility.fsbusiness.co.uk> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 07 2月, 2008 1 次提交
-
-
由 Luís P Mendes 提交于
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by: NLuís P Mendes <luis.p.mendes@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 2月, 2008 1 次提交
-
-
由 Krauth.Julien 提交于
Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards are: APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2, APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NKrauth J. <krauth.julien@addi-data.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 1月, 2008 1 次提交
-
-
由 Florian Fainelli 提交于
This patch defines the PCI identifiers found in the RDC R-321x System-on-Chip. Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 29 1月, 2008 4 次提交
-
-
由 Michael Wu 提交于
This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: NAndrea Merello <andreamrl@tiscali.it> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Francois Romieu 提交于
- whitespaces vs tabs - use 80 cols - use if_mii - use netdev_priv - remove useless cast to void * - PCI device id does not need to be globally available Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Jeff Garzik 提交于
- checkpatch fixes - fix bogus and uninitialized return codes in r6040_start_xmit() - netdev_get_settings() fix obvious locking bug flagged by compiler warning - set DMA consistent mask - remove unnecessary setting of dev->base_addr Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Eliezer Tamir 提交于
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2008 1 次提交
-
-
由 Alan Cox 提交于
Not much to do here. It's an ata memory as disk. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 1月, 2008 1 次提交
-
-
由 Zhao Yakui 提交于
It is important that these resources be reserved to avoid conflicts with well known ACPI registers. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 12月, 2007 1 次提交
-
-
由 Pierre Ossman 提交于
The JMicron JMB38x chip doesn't support transfers that aren't 32-bit aligned (both size and start address). It also doesn't like switching between PIO and DMA mode, so it needs to be reset after each request. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
- 24 11月, 2007 1 次提交
-
-
由 Ayaz Abdulla 提交于
This patch adds new device ids and features for mcp79 devices into the forcedeth driver. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 15 11月, 2007 1 次提交
-
-
由 Shannon Nelson 提交于
Add support for version 2 of the ioatdma device. This device handles the descriptor chain and DCA services slightly differently: - Instead of moving the dma descriptors between a busy and an idle chain, this new version uses a single circular chain so that we don't have rewrite the next_descriptor pointers as we add new requests, and the device doesn't need to re-read the last descriptor. - The new device has the DCA tags defined internally instead of needing them defined statically. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 11月, 2007 1 次提交
-
-
由 Darrick J. Wong 提交于
New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 06 11月, 2007 3 次提交
-
-
由 David Miller 提交于
Now that we have dealt with the real issue, in that some ATI SATA and USB controllers needed the INTX_DISABLE quirk, we can remove these AMD chipset global MSI disabling quirks. This reverts three changesets: 4be8f906 (PCI: disable MSI on RS690) aea6a433 (PCI: disable MSI on RD580) f122392f (PCI: disable MSI on RX790) This is based upon testing and feedback from Shane Huang <Shane.Huang@amd.com>. Cc: Shane Huang <Shane.Huang@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
This is the fix for the following problem: https://bugzilla.redhat.com/show_bug.cgi?id=227657 The bnx2 device 5706 complains about MSI not working behind a ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem: e3008ded: "PCI: disable MSI by default on systems with Serverworks HT1000 chips" was not entirely correct, and has been reverted. MSI does not work on the PCIX bus because the BIOS did not set the HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the bridge. We use the existing quirk_msi_ht_cap() to detect the problem and disable MSI in all buses behind it. Signed-off-by: NMichael Chan <mchan@broadcom.com> Cc: Anantha Subramanyam <ananth@broadcom.com> Cc: Naren Sankar <nsankar@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Miller 提交于
This reverts commit e3008ded. The real bug was an INTX issue in the tg3 ethernet chip, and cured by commit c129d962a66c76964954a98b38586ada82cf9381 Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 10月, 2007 1 次提交
-
-
由 Ayaz Abdulla 提交于
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 22 10月, 2007 1 次提交
-
-
由 Matt Carlson 提交于
This patch adds support for upcoming 5723 devices. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2007 2 次提交
-
-
由 Shannon Nelson 提交于
Add device ids for new revs of the Intel I/OAT DMA engine Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Add support for a whole range of boards. Some are partly autodetected but not fully correctly others (PCI Express notably) not at all. Stick all the right entries in. Thanks to Mainpine for information and testing. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2007 1 次提交
-
-
由 Mike Rapoport 提交于
This patch provides driver for ITE 8152 PCI bridge. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2007 1 次提交
-
-
由 Thomas Backlund 提交于
Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel yenta driver for CardBus. With this patch cardbus works on e.g. Dell Latitude XPi P150CD. Initial patch for kernel 2.4 series by Sune Mølgaard http://molgaard.org/code/linux-2.4.31-picopower.patch Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com) Testing and confirmation that it works by Austin Acton Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel. Added some more cleanups according to CodingStyle, as noted by Randy Dunlap on LKML. [akpm@linux-foundation.org: build fixes] Signed-off-by: NThomas Backlund <tmb@mandriva.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-