bnx2x: Add support for BCM57711 HW

Supporting the 57711 and 57711E - refers to in the code as E1H. The
57710 is referred to as E1.

To support the new members in the family, the bnx2x structure was
divided to 3 parts: common, port and function. These changes caused some
rearrangement in the bnx2x.h file.

A set of accessories macros were added to make access to the bnx2x
structure more readable
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/Kconfig

@@ -2600,6 +2600,7 @@ config BNX2X
 	tristate "Broadcom NetXtremeII 10Gb support"
 	depends on PCI
 	select ZLIB_INFLATE
+	select LIBCRC32C
 	help
 	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
 	  To compile this driver as a module, choose M here: the module

drivers/net/bnx2x_fw_defs.h

@@ -8,191 +8,390 @@
  */
 
 
-#define CSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
-	(0x1922 + (port * 0x40) + (index * 0x4))
-#define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
-	(0x1900 + (port * 0x40))
-#define CSTORM_HC_BTR_OFFSET(port)\
-	(0x1984 + (port * 0xc0))
-#define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index)\
-	(0x141a + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
-#define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index)\
-	(0x1418 + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
-#define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id)\
-	(0x1400 + (port * 0x280) + (cpu_id * 0x28))
-#define CSTORM_STATS_FLAGS_OFFSET(port) 		(0x5108 + (port * 0x8))
-#define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id)\
-	(0x1510 + (port * 0x240) + (client_id * 0x20))
-#define TSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
-	(0x138a + (port * 0x28) + (index * 0x4))
-#define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
-	(0x1370 + (port * 0x28))
-#define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(port)\
-	(0x4b70 + (port * 0x8))
-#define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function)\
-	(0x1418 + (function * 0x30))
-#define TSTORM_HC_BTR_OFFSET(port)\
-	(0x13c4 + (port * 0x18))
-#define TSTORM_INDIRECTION_TABLE_OFFSET(port)\
-	(0x22c8 + (port * 0x80))
-#define TSTORM_INDIRECTION_TABLE_SIZE			0x80
-#define TSTORM_MAC_FILTER_CONFIG_OFFSET(port)\
-	(0x1420 + (port * 0x30))
-#define TSTORM_RCQ_PROD_OFFSET(port, client_id)\
-	(0x1508 + (port * 0x240) + (client_id * 0x20))
-#define TSTORM_STATS_FLAGS_OFFSET(port) 		(0x4b90 + (port * 0x8))
-#define USTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
-	(0x191a + (port * 0x28) + (index * 0x4))
-#define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
-	(0x1900 + (port * 0x28))
-#define USTORM_HC_BTR_OFFSET(port)\
-	(0x1954 + (port * 0xb8))
-#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(port)\
-	(0x5408 + (port * 0x8))
-#define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index)\
-	(0x141a + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
-#define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index)\
-	(0x1418 + (port * 0x280) + (cpu_id * 0x28) + (index * 0x4))
-#define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id)\
-	(0x1400 + (port * 0x280) + (cpu_id * 0x28))
-#define XSTORM_ASSERT_LIST_INDEX_OFFSET 		0x1000
-#define XSTORM_ASSERT_LIST_OFFSET(idx)			(0x1020 + (idx * 0x10))
-#define XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index)\
-	(0x141a + (port * 0x28) + (index * 0x4))
-#define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port)\
-	(0x1400 + (port * 0x28))
-#define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(port)\
-	(0x5408 + (port * 0x8))
-#define XSTORM_HC_BTR_OFFSET(port)\
-	(0x1454 + (port * 0x18))
-#define XSTORM_SPQ_PAGE_BASE_OFFSET(port)\
-	(0x5328 + (port * 0x18))
-#define XSTORM_SPQ_PROD_OFFSET(port)\
-	(0x5330 + (port * 0x18))
-#define XSTORM_STATS_FLAGS_OFFSET(port) 		(0x53f8 + (port * 0x8))
+#define CSTORM_ASSERT_LIST_INDEX_OFFSET \
+	(IS_E1H_OFFSET? 0x7000 : 0x1000)
+#define CSTORM_ASSERT_LIST_OFFSET(idx) \
+	(IS_E1H_OFFSET? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+#define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
+	(IS_E1H_OFFSET? (0x8522 + ((function>>1) * 0x40) + ((function&1) \
+	* 0x100) + (index * 0x4)) : (0x1922 + (function * 0x40) + (index \
+	* 0x4)))
+#define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x8500 + ((function>>1) * 0x40) + ((function&1) \
+	* 0x100)) : (0x1900 + (function * 0x40)))
+#define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x8508 + ((function>>1) * 0x40) + ((function&1) \
+	* 0x100)) : (0x1908 + (function * 0x40)))
+#define CSTORM_FUNCTION_MODE_OFFSET \
+	(IS_E1H_OFFSET? 0x11e8 : 0xffffffff)
+#define CSTORM_HC_BTR_OFFSET(port) \
+	(IS_E1H_OFFSET? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
+#define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
+	(IS_E1H_OFFSET? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)))
+#define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
+	(IS_E1H_OFFSET? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)))
+#define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
+	(IS_E1H_OFFSET? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
+#define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
+	(IS_E1H_OFFSET? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
+#define CSTORM_STATS_FLAGS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x1108 + (function * 0x8)) : (0x5108 + \
+	(function * 0x8)))
+#define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x31c0 + (function * 0x20)) : 0xffffffff)
+#define TSTORM_ASSERT_LIST_INDEX_OFFSET \
+	(IS_E1H_OFFSET? 0xa000 : 0x1000)
+#define TSTORM_ASSERT_LIST_OFFSET(idx) \
+	(IS_E1H_OFFSET? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+#define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
+	(IS_E1H_OFFSET? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) : \
+	(0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
+#define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
+	(IS_E1H_OFFSET? (0xb01a + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
+	0x4)))
+#define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0xb000 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1400 + (function * 0x28)))
+#define TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
+	(IS_E1H_OFFSET? (0xb008 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1408 + (function * 0x28)))
+#define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+	(function * 0x8)))
+#define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x3000 + (function * 0x38)) : (0x1500 + \
+	(function * 0x38)))
+#define TSTORM_FUNCTION_MODE_OFFSET \
+	(IS_E1H_OFFSET? 0x1ad0 : 0xffffffff)
+#define TSTORM_HC_BTR_OFFSET(port) \
+	(IS_E1H_OFFSET? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x12c8 + (function * 0x80)) : (0x22c8 + \
+	(function * 0x80)))
+#define TSTORM_INDIRECTION_TABLE_SIZE 0x80
+#define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x3008 + (function * 0x38)) : (0x1508 + \
+	(function * 0x38)))
+#define TSTORM_RX_PRODS_OFFSET(port, client_id) \
+	(IS_E1H_OFFSET? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) : \
+	(0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
+#define TSTORM_STATS_FLAGS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+	(function * 0x8)))
+#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET? 0x3b30 : 0x1c20)
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET? 0xa040 : 0x2c10)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET? 0x2440 : 0x1200)
+#define USTORM_ASSERT_LIST_INDEX_OFFSET \
+	(IS_E1H_OFFSET? 0x8000 : 0x1000)
+#define USTORM_ASSERT_LIST_OFFSET(idx) \
+	(IS_E1H_OFFSET? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+#define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
+	(IS_E1H_OFFSET? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
+	(0x5450 + (port * 0x1c8) + (clientId * 0x18)))
+#define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
+	(IS_E1H_OFFSET? (0x951a + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0) + (index * 0x4)) : (0x191a + (function * 0x28) + (index * \
+	0x4)))
+#define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x9500 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1900 + (function * 0x28)))
+#define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x9508 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1908 + (function * 0x28)))
+#define USTORM_FUNCTION_MODE_OFFSET \
+	(IS_E1H_OFFSET? 0x2448 : 0xffffffff)
+#define USTORM_HC_BTR_OFFSET(port) \
+	(IS_E1H_OFFSET? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
+#define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
+	(IS_E1H_OFFSET? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
+	(0x5448 + (port * 0x1c8) + (clientId * 0x18)))
+#define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2408 + (function * 0x8)) : (0x5408 + \
+	(function * 0x8)))
+#define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
+	(IS_E1H_OFFSET? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)))
+#define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
+	(IS_E1H_OFFSET? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
+	(index * 0x4)))
+#define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
+	(IS_E1H_OFFSET? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
+#define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
+	(IS_E1H_OFFSET? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
+#define XSTORM_ASSERT_LIST_INDEX_OFFSET \
+	(IS_E1H_OFFSET? 0x9000 : 0x1000)
+#define XSTORM_ASSERT_LIST_OFFSET(idx) \
+	(IS_E1H_OFFSET? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+#define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
+	(IS_E1H_OFFSET? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
+#define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
+	(IS_E1H_OFFSET? (0xa01a + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
+	0x4)))
+#define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0xa000 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1400 + (function * 0x28)))
+#define XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
+	(IS_E1H_OFFSET? (0xa008 + ((function>>1) * 0x28) + ((function&1) \
+	* 0xa0)) : (0x1408 + (function * 0x28)))
+#define XSTORM_E1HOV_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2ab8 + (function * 0x2)) : 0xffffffff)
+#define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2418 + (function * 0x8)) : (0x3b70 + \
+	(function * 0x8)))
+#define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2568 + (function * 0x70)) : (0x3c60 + \
+	(function * 0x70)))
+#define XSTORM_FUNCTION_MODE_OFFSET \
+	(IS_E1H_OFFSET? 0x2ac8 : 0xffffffff)
+#define XSTORM_HC_BTR_OFFSET(port) \
+	(IS_E1H_OFFSET? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2528 + (function * 0x70)) : (0x3c20 + \
+	(function * 0x70)))
+#define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2000 + (function * 0x10)) : (0x3328 + \
+	(function * 0x10)))
+#define XSTORM_SPQ_PROD_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x2008 + (function * 0x10)) : (0x3330 + \
+	(function * 0x10)))
+#define XSTORM_STATS_FLAGS_OFFSET(function) \
+	(IS_E1H_OFFSET? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+	(function * 0x8)))
 #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
 
 /**
 * This file defines HSI constatnts for the ETH flow
 */
-
-/* hash types */
-#define DEFAULT_HASH_TYPE			0
-#define IPV4_HASH_TYPE				1
-#define TCP_IPV4_HASH_TYPE			2
-#define IPV6_HASH_TYPE				3
-#define TCP_IPV6_HASH_TYPE			4
+#ifdef _EVEREST_MICROCODE
+#include "microcode_constants.h"
+#include "eth_rx_bd.h"
+#include "eth_tx_bd.h"
+#include "eth_rx_cqe.h"
+#include "eth_rx_sge.h"
+#include "eth_rx_cqe_next_page.h"
+#endif
+
+/* RSS hash types */
+#define DEFAULT_HASH_TYPE 0
+#define IPV4_HASH_TYPE 1
+#define TCP_IPV4_HASH_TYPE 2
+#define IPV6_HASH_TYPE 3
+#define TCP_IPV6_HASH_TYPE 4
+
+/* Ethernet Ring parmaters */
+#define X_ETH_LOCAL_RING_SIZE 13
+#define FIRST_BD_IN_PKT 0
+#define PARSE_BD_INDEX 1
+#define NUM_OF_ETH_BDS_IN_PAGE \
+	((PAGE_SIZE) / (STRUCT_SIZE(eth_tx_bd)/8))
+
+
+/* Rx ring params */
+#define U_ETH_LOCAL_BD_RING_SIZE (16)
+#define U_ETH_LOCAL_SGE_RING_SIZE (12)
+#define U_ETH_SGL_SIZE (8)
+
+
+#define U_ETH_BDS_PER_PAGE_MASK \
+	((PAGE_SIZE/(STRUCT_SIZE(eth_rx_bd)/8))-1)
+#define U_ETH_CQE_PER_PAGE_MASK \
+	((PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe)/8))-1)
+#define U_ETH_SGES_PER_PAGE_MASK \
+	((PAGE_SIZE/(STRUCT_SIZE(eth_rx_sge)/8))-1)
+
+#define U_ETH_SGES_PER_PAGE_INVERSE_MASK \
+	(0xFFFF - ((PAGE_SIZE/((STRUCT_SIZE(eth_rx_sge))/8))-1))
+
+
+#define TU_ETH_CQES_PER_PAGE \
+	(PAGE_SIZE/(STRUCT_SIZE(eth_rx_cqe_next_page)/8))
+#define U_ETH_BDS_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_bd)/8))
+#define U_ETH_SGES_PER_PAGE (PAGE_SIZE/(STRUCT_SIZE(eth_rx_sge)/8))
+
+#define U_ETH_UNDEFINED_Q 0xFF
 
 /* values of command IDs in the ramrod message */
-#define RAMROD_CMD_ID_ETH_PORT_SETUP			(80)
-#define RAMROD_CMD_ID_ETH_CLIENT_SETUP			(85)
-#define RAMROD_CMD_ID_ETH_STAT_QUERY			(90)
-#define RAMROD_CMD_ID_ETH_UPDATE			(100)
-#define RAMROD_CMD_ID_ETH_HALT				(105)
-#define RAMROD_CMD_ID_ETH_SET_MAC			(110)
-#define RAMROD_CMD_ID_ETH_CFC_DEL			(115)
-#define RAMROD_CMD_ID_ETH_PORT_DEL			(120)
-#define RAMROD_CMD_ID_ETH_FORWARD_SETUP 		(125)
+#define RAMROD_CMD_ID_ETH_PORT_SETUP (80)
+#define RAMROD_CMD_ID_ETH_CLIENT_SETUP (85)
+#define RAMROD_CMD_ID_ETH_STAT_QUERY (90)
+#define RAMROD_CMD_ID_ETH_UPDATE (100)
+#define RAMROD_CMD_ID_ETH_HALT (105)
+#define RAMROD_CMD_ID_ETH_SET_MAC (110)
+#define RAMROD_CMD_ID_ETH_CFC_DEL (115)
+#define RAMROD_CMD_ID_ETH_PORT_DEL (120)
+#define RAMROD_CMD_ID_ETH_FORWARD_SETUP (125)
 
 
 /* command values for set mac command */
-#define T_ETH_MAC_COMMAND_SET				0
-#define T_ETH_MAC_COMMAND_INVALIDATE			1
+#define T_ETH_MAC_COMMAND_SET 0
+#define T_ETH_MAC_COMMAND_INVALIDATE 1
+
+#define T_ETH_INDIRECTION_TABLE_SIZE 128
 
-#define T_ETH_INDIRECTION_TABLE_SIZE			128
+/*The CRC32 seed, that is used for the hash(reduction) multicast address */
+#define T_ETH_CRC32_HASH_SEED 0x00000000
 
 /* Maximal L2 clients supported */
-#define ETH_MAX_RX_CLIENTS				(18)
+#define ETH_MAX_RX_CLIENTS_E1 19
+#define ETH_MAX_RX_CLIENTS_E1H 25
+
+/* Maximal aggregation queues supported */
+#define ETH_MAX_AGGREGATION_QUEUES_E1 (32)
+#define ETH_MAX_AGGREGATION_QUEUES_E1H (64)
+
 
 /**
 * This file defines HSI constatnts common to all microcode flows
 */
 
 /* Connection types */
-#define ETH_CONNECTION_TYPE			0
+#define ETH_CONNECTION_TYPE 0
+#define TOE_CONNECTION_TYPE 1
+#define RDMA_CONNECTION_TYPE 2
+#define ISCSI_CONNECTION_TYPE 3
+#define FCOE_CONNECTION_TYPE 4
+#define RESERVED_CONNECTION_TYPE_0 5
+#define RESERVED_CONNECTION_TYPE_1 6
+#define RESERVED_CONNECTION_TYPE_2 7
+
 
-#define PROTOCOL_STATE_BIT_OFFSET		6
+#define PROTOCOL_STATE_BIT_OFFSET 6
 
-#define ETH_STATE	(ETH_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
+#define ETH_STATE (ETH_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
+#define TOE_STATE (TOE_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
+#define RDMA_STATE (RDMA_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
+#define ISCSI_STATE \
+	(ISCSI_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
+#define FCOE_STATE (FCOE_CONNECTION_TYPE << PROTOCOL_STATE_BIT_OFFSET)
 
 /* microcode fixed page page size 4K (chains and ring segments) */
-#define MC_PAGE_SIZE						(4096)
+#define MC_PAGE_SIZE (4096)
 
-/* Host coalescing constants */
 
-/* IGU constants */
-#define IGU_PORT_BASE				0x0400
-
-#define IGU_ADDR_MSIX				0x0000
-#define IGU_ADDR_INT_ACK			0x0200
-#define IGU_ADDR_PROD_UPD			0x0201
-#define IGU_ADDR_ATTN_BITS_UPD			0x0202
-#define IGU_ADDR_ATTN_BITS_SET			0x0203
-#define IGU_ADDR_ATTN_BITS_CLR			0x0204
-#define IGU_ADDR_COALESCE_NOW			0x0205
-#define IGU_ADDR_SIMD_MASK			0x0206
-#define IGU_ADDR_SIMD_NOMASK			0x0207
-#define IGU_ADDR_MSI_CTL			0x0210
-#define IGU_ADDR_MSI_ADDR_LO			0x0211
-#define IGU_ADDR_MSI_ADDR_HI			0x0212
-#define IGU_ADDR_MSI_DATA			0x0213
-
-#define IGU_INT_ENABLE				0
-#define IGU_INT_DISABLE 			1
-#define IGU_INT_NOP				2
-#define IGU_INT_NOP2				3
+/* Host coalescing constants */
 
 /* index numbers */
-#define HC_USTORM_DEF_SB_NUM_INDICES		4
-#define HC_CSTORM_DEF_SB_NUM_INDICES		8
-#define HC_XSTORM_DEF_SB_NUM_INDICES		4
-#define HC_TSTORM_DEF_SB_NUM_INDICES		4
-#define HC_USTORM_SB_NUM_INDICES		4
-#define HC_CSTORM_SB_NUM_INDICES		4
+#define HC_USTORM_DEF_SB_NUM_INDICES 4
+#define HC_CSTORM_DEF_SB_NUM_INDICES 8
+#define HC_XSTORM_DEF_SB_NUM_INDICES 4
+#define HC_TSTORM_DEF_SB_NUM_INDICES 4
+#define HC_USTORM_SB_NUM_INDICES 4
+#define HC_CSTORM_SB_NUM_INDICES 4
 
 /* index values - which counterto update */
 
-#define HC_INDEX_U_ETH_RX_CQ_CONS		1
+#define HC_INDEX_U_TOE_RX_CQ_CONS 0
+#define HC_INDEX_U_ETH_RX_CQ_CONS 1
+#define HC_INDEX_U_ETH_RX_BD_CONS 2
+#define HC_INDEX_U_FCOE_EQ_CONS 3
+
+#define HC_INDEX_C_TOE_TX_CQ_CONS 0
+#define HC_INDEX_C_ETH_TX_CQ_CONS 1
+#define HC_INDEX_C_ISCSI_EQ_CONS 2
+
+#define HC_INDEX_DEF_X_SPQ_CONS 0
 
-#define HC_INDEX_C_ETH_TX_CQ_CONS		1
+#define HC_INDEX_DEF_C_RDMA_EQ_CONS 0
+#define HC_INDEX_DEF_C_RDMA_NAL_PROD 1
+#define HC_INDEX_DEF_C_ETH_FW_TX_CQ_CONS 2
+#define HC_INDEX_DEF_C_ETH_SLOW_PATH 3
+#define HC_INDEX_DEF_C_ETH_RDMA_CQ_CONS 4
+#define HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS 5
 
-#define HC_INDEX_DEF_X_SPQ_CONS 		0
+#define HC_INDEX_DEF_U_ETH_RDMA_RX_CQ_CONS 0
+#define HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS 1
+#define HC_INDEX_DEF_U_ETH_RDMA_RX_BD_CONS 2
+#define HC_INDEX_DEF_U_ETH_ISCSI_RX_BD_CONS 3
 
-#define HC_INDEX_DEF_C_ETH_FW_TX_CQ_CONS	2
-#define HC_INDEX_DEF_C_ETH_SLOW_PATH		3
 
 /* used by the driver to get the SB offset */
-#define USTORM_ID			0
-#define CSTORM_ID			1
-#define XSTORM_ID			2
-#define TSTORM_ID			3
-#define ATTENTION_ID			4
+#define USTORM_ID 0
+#define CSTORM_ID 1
+#define XSTORM_ID 2
+#define TSTORM_ID 3
+#define ATTENTION_ID 4
 
 /* max number of slow path commands per port */
-#define MAX_RAMRODS_PER_PORT		(8)
+#define MAX_RAMRODS_PER_PORT (8)
 
 /* values for RX ETH CQE type field */
-#define RX_ETH_CQE_TYPE_ETH_FASTPATH	(0)
-#define RX_ETH_CQE_TYPE_ETH_RAMROD		(1)
-
-/* MAC address list size */
-#define T_MAC_ADDRESS_LIST_SIZE 	(96)
-
+#define RX_ETH_CQE_TYPE_ETH_FASTPATH (0)
+#define RX_ETH_CQE_TYPE_ETH_RAMROD (1)
+
+
+/**** DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/
+#define EMULATION_FREQUENCY_FACTOR (1600)
+#define FPGA_FREQUENCY_FACTOR (100)
+
+#define TIMERS_TICK_SIZE_CHIP (1e-3)
+#define TIMERS_TICK_SIZE_EMUL \
+ ((TIMERS_TICK_SIZE_CHIP)/((EMULATION_FREQUENCY_FACTOR)))
+#define TIMERS_TICK_SIZE_FPGA \
+ ((TIMERS_TICK_SIZE_CHIP)/((FPGA_FREQUENCY_FACTOR)))
+
+#define TSEMI_CLK1_RESUL_CHIP (1e-3)
+#define TSEMI_CLK1_RESUL_EMUL \
+ ((TSEMI_CLK1_RESUL_CHIP)/(EMULATION_FREQUENCY_FACTOR))
+#define TSEMI_CLK1_RESUL_FPGA \
+ ((TSEMI_CLK1_RESUL_CHIP)/(FPGA_FREQUENCY_FACTOR))
+
+#define USEMI_CLK1_RESUL_CHIP \
+ (TIMERS_TICK_SIZE_CHIP)
+#define USEMI_CLK1_RESUL_EMUL \
+ (TIMERS_TICK_SIZE_EMUL)
+#define USEMI_CLK1_RESUL_FPGA \
+ (TIMERS_TICK_SIZE_FPGA)
+
+#define XSEMI_CLK1_RESUL_CHIP (1e-3)
+#define XSEMI_CLK1_RESUL_EMUL \
+ ((XSEMI_CLK1_RESUL_CHIP)/(EMULATION_FREQUENCY_FACTOR))
+#define XSEMI_CLK1_RESUL_FPGA \
+ ((XSEMI_CLK1_RESUL_CHIP)/(FPGA_FREQUENCY_FACTOR))
+
+#define XSEMI_CLK2_RESUL_CHIP (1e-6)
+#define XSEMI_CLK2_RESUL_EMUL \
+ ((XSEMI_CLK2_RESUL_CHIP)/(EMULATION_FREQUENCY_FACTOR))
+#define XSEMI_CLK2_RESUL_FPGA \
+ ((XSEMI_CLK2_RESUL_CHIP)/(FPGA_FREQUENCY_FACTOR))
+
+#define SDM_TIMER_TICK_RESUL_CHIP (4*(1e-6))
+#define SDM_TIMER_TICK_RESUL_EMUL \
+ ((SDM_TIMER_TICK_RESUL_CHIP)/(EMULATION_FREQUENCY_FACTOR))
+#define SDM_TIMER_TICK_RESUL_FPGA \
+ ((SDM_TIMER_TICK_RESUL_CHIP)/(FPGA_FREQUENCY_FACTOR))
+
+
+/**** END DEFINES FOR TIMERS/CLOCKS RESOLUTIONS ****/
 #define XSTORM_IP_ID_ROLL_HALF 0x8000
 #define XSTORM_IP_ID_ROLL_ALL 0
 
-#define FW_LOG_LIST_SIZE	(50)
+#define FW_LOG_LIST_SIZE (50)
+
+#define NUM_OF_PROTOCOLS 4
+#define MAX_COS_NUMBER 16
+#define MAX_T_STAT_COUNTER_ID 18
+#define MAX_X_STAT_COUNTER_ID 18
 
-#define NUM_OF_PROTOCOLS		4
-#define MAX_COS_NUMBER			16
-#define MAX_T_STAT_COUNTER_ID	18
+#define UNKNOWN_ADDRESS 0
+#define UNICAST_ADDRESS 1
+#define MULTICAST_ADDRESS 2
+#define BROADCAST_ADDRESS 3
 
-#define T_FAIR							1
-#define FAIR_MEM						2
-#define RS_PERIODIC_TIMEOUT_IN_SDM_TICS 25
+#define SINGLE_FUNCTION 0
+#define MULTI_FUNCTION 1
 
-#define UNKNOWN_ADDRESS 	0
-#define UNICAST_ADDRESS 	1
-#define MULTICAST_ADDRESS	2
-#define BROADCAST_ADDRESS	3
+#define IP_V4 0
+#define IP_V6 1
 

drivers/net/bnx2x_init.h

@@ -226,28 +226,28 @@ static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1)
 			       tsem_int_table_data_e1h;
 	else
 		IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr)
-		data = is_e1 ? csem_int_table_data_e1 :
-			       csem_int_table_data_e1h;
+			data = is_e1 ? csem_int_table_data_e1 :
+				       csem_int_table_data_e1h;
 	else
 		IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr)
-		data = is_e1 ? usem_int_table_data_e1 :
-			       usem_int_table_data_e1h;
+			data = is_e1 ? usem_int_table_data_e1 :
+				       usem_int_table_data_e1h;
 	else
 		IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr)
-		data = is_e1 ? xsem_int_table_data_e1 :
-			       xsem_int_table_data_e1h;
+			data = is_e1 ? xsem_int_table_data_e1 :
+				       xsem_int_table_data_e1h;
 	else
 		IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr)
-		data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
+			data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h;
 	else
 		IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr)
-		data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
+			data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h;
 	else
 		IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr)
-		data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
+			data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h;
 	else
 		IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr)
-		data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
+			data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h;
 
 	return data;
 }

drivers/net/bnx2x_link.c

@@ -3572,7 +3572,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 			   LED_BLINK_RATE_VAL);
 		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
 			   port*4, 1);
-		if (((speed == SPEED_2500) ||
+		if (!CHIP_IS_E1H(bp) &&
+		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
 		     (speed == SPEED_100) ||
 		     (speed == SPEED_10))) {
@@ -3753,6 +3754,14 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		vars->duplex = DUPLEX_FULL;
 		vars->flow_ctrl = FLOW_CTRL_NONE;
 		vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
+		/* enable on E1.5 FPGA */
+		if (CHIP_IS_E1H(bp)) {
+			vars->flow_ctrl |=
+				(FLOW_CTRL_TX | FLOW_CTRL_RX);
+			vars->link_status |=
+					(LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
+					 LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
+		}
 
 		bnx2x_emac_enable(params, vars, 0);
 		bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);

drivers/net/bnx2x_reg.h

@@ -38,21 +38,19 @@
    was asserted. */
 #define BRB1_REG_NUM_OF_FULL_CYCLES_0				 0x600c8
 #define BRB1_REG_NUM_OF_FULL_CYCLES_1				 0x600cc
-#define BRB1_REG_NUM_OF_FULL_CYCLES_2				 0x600d0
-#define BRB1_REG_NUM_OF_FULL_CYCLES_3				 0x600d4
 #define BRB1_REG_NUM_OF_FULL_CYCLES_4				 0x600d8
 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
    asserted. */
 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0				 0x600b8
 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1				 0x600bc
-#define BRB1_REG_NUM_OF_PAUSE_CYCLES_2				 0x600c0
-#define BRB1_REG_NUM_OF_PAUSE_CYCLES_3				 0x600c4
 /* [RW 10] Write client 0: De-assert pause threshold. */
 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 			 0x60078
 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 			 0x6007c
 /* [RW 10] Write client 0: Assert pause threshold. */
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0				 0x60068
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1				 0x6006c
+/* [R 24] The number of full blocks occpied by port. */
+#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0				 0x60094
 /* [RW 1] Reset the design by software. */
 #define BRB1_REG_SOFT_RESET					 0x600dc
 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
@@ -513,7 +511,6 @@
 /* [RW 15] Interrupt table Read and write access to it is not possible in
    the middle of the work */
 #define CSEM_REG_INT_TABLE					 0x200400
-#define CSEM_REG_INT_TABLE_SIZE 				 256
 /* [ST 24] Statistics register. The number of messages that entered through
    FIC0 */
 #define CSEM_REG_MSG_NUM_FIC0					 0x200000
@@ -587,13 +584,10 @@
 #define DBG_REG_DBG_PRTY_MASK					 0xc0a8
 /* [R 1] Parity register #0 read */
 #define DBG_REG_DBG_PRTY_STS					 0xc09c
-/* [RW 2] debug only: These bits indicate the credit for PCI request type 4
-   interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
-   configured */
-#define DBG_REG_PCI_REQ_CREDIT					 0xc120
 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
    as 14*X+Y. */
 #define DMAE_REG_CMD_MEM					 0x102400
+#define DMAE_REG_CMD_MEM_SIZE					 224
 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
    initial value is all ones. */
 #define DMAE_REG_CRC16C_INIT					 0x10201c
@@ -1626,7 +1620,7 @@
    is reset to 0x080; giving a default blink period of approximately 8Hz. */
 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0			 0x10310
 /* [RW 1] Port0: If set along with the
-   nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
+ ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
    bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
    bit; the Traffic LED will blink with the blink rate specified in
    ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
@@ -1733,9 +1727,21 @@
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port0 */
 #define NIG_REG_STAT0_BRB_DISCARD				 0x105f0
+/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
+   between 1024 and 1522 bytes for port0 */
+#define NIG_REG_STAT0_EGRESS_MAC_PKT0				 0x10750
+/* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
+   between 1523 bytes and above for port0 */
+#define NIG_REG_STAT0_EGRESS_MAC_PKT1				 0x10760
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port1 */
 #define NIG_REG_STAT1_BRB_DISCARD				 0x10628
+/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
+   between 1024 and 1522 bytes for port1 */
+#define NIG_REG_STAT1_EGRESS_MAC_PKT0				 0x107a0
+/* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
+   between 1523 bytes and above for port1 */
+#define NIG_REG_STAT1_EGRESS_MAC_PKT1				 0x107b0
 /* [WB_R 64] Rx statistics : User octets received for LP */
 #define NIG_REG_STAT2_BRB_OCTET 				 0x107e0
 #define NIG_REG_STATUS_INTERRUPT_PORT0				 0x10328
@@ -1849,7 +1855,6 @@
 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT			 0x4011c
 /* [RW 24] CID for port 0 if no match */
 #define PRS_REG_CID_PORT_0					 0x400fc
-#define PRS_REG_CID_PORT_1					 0x40100
 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
    load response is reset and packet type is 0. Used in packet start message
    to TCM. */
@@ -1957,6 +1962,10 @@
 #define PXP2_REG_HST_DATA_FIFO_STATUS				 0x12047c
 /* [R 7] Debug only: Number of used entries in the header FIFO */
 #define PXP2_REG_HST_HEADER_FIFO_STATUS 			 0x120478
+#define PXP2_REG_PGL_ADDR_88_F0 				 0x120534
+#define PXP2_REG_PGL_ADDR_8C_F0 				 0x120538
+#define PXP2_REG_PGL_ADDR_90_F0 				 0x12053c
+#define PXP2_REG_PGL_ADDR_94_F0 				 0x120540
 #define PXP2_REG_PGL_CONTROL0					 0x120490
 #define PXP2_REG_PGL_CONTROL1					 0x120514
 /* [RW 32] third dword data of expansion rom request. this register is
@@ -2060,12 +2069,13 @@
 #define PXP2_REG_PSWRQ_SRC0_L2P 				 0x120054
 #define PXP2_REG_PSWRQ_TM0_L2P					 0x12001c
 #define PXP2_REG_PSWRQ_TSDM0_L2P				 0x1200e0
-/* [RW 25] Interrupt mask register #0 read/write */
-#define PXP2_REG_PXP2_INT_MASK					 0x120578
-/* [R 25] Interrupt register #0 read */
-#define PXP2_REG_PXP2_INT_STS					 0x12056c
-/* [RC 25] Interrupt register #0 read clear */
-#define PXP2_REG_PXP2_INT_STS_CLR				 0x120570
+/* [RW 32] Interrupt mask register #0 read/write */
+#define PXP2_REG_PXP2_INT_MASK_0				 0x120578
+/* [R 32] Interrupt register #0 read */
+#define PXP2_REG_PXP2_INT_STS_0 				 0x12056c
+#define PXP2_REG_PXP2_INT_STS_1 				 0x120608
+/* [RC 32] Interrupt register #0 read clear */
+#define PXP2_REG_PXP2_INT_STS_CLR_0				 0x120570
 /* [RW 32] Parity mask register #0 read/write */
 #define PXP2_REG_PXP2_PRTY_MASK_0				 0x120588
 #define PXP2_REG_PXP2_PRTY_MASK_1				 0x120598
@@ -2811,22 +2821,6 @@
 #define QM_REG_QVOQIDX_97					 0x16e490
 #define QM_REG_QVOQIDX_98					 0x16e494
 #define QM_REG_QVOQIDX_99					 0x16e498
-/* [R 24] Remaining pause timeout for queues 15-0 */
-#define QM_REG_REMAINPAUSETM0					 0x168418
-/* [R 24] Remaining pause timeout for queues 31-16 */
-#define QM_REG_REMAINPAUSETM1					 0x16841c
-/* [R 24] Remaining pause timeout for queues 47-32 */
-#define QM_REG_REMAINPAUSETM2					 0x16e69c
-/* [R 24] Remaining pause timeout for queues 63-48 */
-#define QM_REG_REMAINPAUSETM3					 0x16e6a0
-/* [R 24] Remaining pause timeout for queues 79-64 */
-#define QM_REG_REMAINPAUSETM4					 0x16e6a4
-/* [R 24] Remaining pause timeout for queues 95-80 */
-#define QM_REG_REMAINPAUSETM5					 0x16e6a8
-/* [R 24] Remaining pause timeout for queues 111-96 */
-#define QM_REG_REMAINPAUSETM6					 0x16e6ac
-/* [R 24] Remaining pause timeout for queues 127-112 */
-#define QM_REG_REMAINPAUSETM7					 0x16e6b0
 /* [RW 1] Initialization bit command */
 #define QM_REG_SOFT_RESET					 0x168428
 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
@@ -3826,7 +3820,6 @@
 /* [RW 15] Interrupt table Read and write access to it is not possible in
    the middle of the work */
 #define TSEM_REG_INT_TABLE					 0x180400
-#define TSEM_REG_INT_TABLE_SIZE 				 256
 /* [ST 24] Statistics register. The number of messages that entered through
    FIC0 */
 #define TSEM_REG_MSG_NUM_FIC0					 0x180000
@@ -4283,7 +4276,6 @@
 /* [RW 15] Interrupt table Read and write access to it is not possible in
    the middle of the work */
 #define USEM_REG_INT_TABLE					 0x300400
-#define USEM_REG_INT_TABLE_SIZE 				 256
 /* [ST 24] Statistics register. The number of messages that entered through
    FIC0 */
 #define USEM_REG_MSG_NUM_FIC0					 0x300000
@@ -4802,7 +4794,6 @@
 /* [RW 15] Interrupt table Read and write access to it is not possible in
    the middle of the work */
 #define XSEM_REG_INT_TABLE					 0x280400
-#define XSEM_REG_INT_TABLE_SIZE 				 256
 /* [ST 24] Statistics register. The number of messages that entered through
    FIC0 */
 #define XSEM_REG_MSG_NUM_FIC0					 0x280000
@@ -4930,10 +4921,7 @@
 #define EMAC_MDIO_MODE_CLOCK_CNT				 (0x3fL<<16)
 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT			 16
 #define EMAC_MODE_25G_MODE					 (1L<<5)
-#define EMAC_MODE_ACPI_RCVD					 (1L<<20)
 #define EMAC_MODE_HALF_DUPLEX					 (1L<<1)
-#define EMAC_MODE_MPKT						 (1L<<18)
-#define EMAC_MODE_MPKT_RCVD					 (1L<<19)
 #define EMAC_MODE_PORT_GMII					 (2L<<2)
 #define EMAC_MODE_PORT_MII					 (1L<<2)
 #define EMAC_MODE_PORT_MII_10M					 (3L<<2)

include/linux/pci_ids.h

@@ -1949,6 +1949,8 @@
 #define PCI_DEVICE_ID_NX2_5708		0x164c
 #define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
 #define PCI_DEVICE_ID_NX2_57710		0x164e
+#define PCI_DEVICE_ID_NX2_57711		0x164f
+#define PCI_DEVICE_ID_NX2_57711E	0x1650
 #define PCI_DEVICE_ID_TIGON3_5705	0x1653
 #define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
 #define PCI_DEVICE_ID_TIGON3_5720	0x1658