if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but
not any of the path components above:

- store the /sub/dir/foo prefix in the cifs super_block info
- in the superblock, set root dentry to the subpath dentry (instead of
  the share root)
- set a flag in the superblock to remember it
- use prefixpath when building path from a dentry

fixes bso#8950
Signed-off-by: NAurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

The secmech hmac(md5) structures are present in the TCP_Server_Info
struct and can be shared among multiple CIFS sessions.  However, the
server mutex is not currently held when these structures are allocated
and used, which can lead to a kernel crashes, as in the scenario below:

mount.cifs(8) #1				mount.cifs(8) #2

Is secmech.sdeschmaccmd5 allocated?
// false

						Is secmech.sdeschmaccmd5 allocated?
						// false

secmech.hmacmd = crypto_alloc_shash..
secmech.sdeschmaccmd5 = kzalloc..
sdeschmaccmd5->shash.tfm = &secmec.hmacmd;

						secmech.sdeschmaccmd5 = kzalloc
						// sdeschmaccmd5->shash.tfm
						// not yet assigned

crypto_shash_update()
 deref NULL sdeschmaccmd5->shash.tfm

 Unable to handle kernel paging request at virtual address 00000030
 epc   : 8027ba34 crypto_shash_update+0x38/0x158
 ra    : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84
 Call Trace:
  crypto_shash_update+0x38/0x158
  setup_ntlmv2_rsp+0x4bc/0xa84
  build_ntlmssp_auth_blob+0xbc/0x34c
  sess_auth_rawntlmssp_authenticate+0xac/0x248
  CIFS_SessSetup+0xf0/0x178
  cifs_setup_session+0x4c/0x84
  cifs_get_smb_ses+0x2c8/0x314
  cifs_mount+0x38c/0x76c
  cifs_do_mount+0x98/0x440
  mount_fs+0x20/0xc0
  vfs_kern_mount+0x58/0x138
  do_mount+0x1e8/0xccc
  SyS_mount+0x88/0xd4
  syscall_common+0x30/0x54

Fix this by locking the srv_mutex around the code which uses these
hmac(md5) structures.  All the other secmech algos already have similar
locking.

Fixes: 95dc8dd1 ("Limit allocation of crypto mechanisms to dialect which requires")
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

adfeb3e0 ("cifs: Make echo interval tunable") added a comparison of
vol->echo_interval to server->echo_interval as a criterium to
match_server(), but:

 (1) A default value is set for server->echo_interval but not for
 vol->echo_interval, meaning these can never match if the echo_interval
 option is not specified.

 (2) vol->echo_interval is in seconds but server->echo_interval is in
 jiffies, meaning these can never match even if the echo_interval option
 is specified.

This broke TCP session reuse since match_server() can never return 1.
Fix it.

Fixes: adfeb3e0 ("cifs: Make echo interval tunable")
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

When opening a file with O_CREAT flag, check to see if the file opened
is an existing directory.

This prevents the directory from being opened which subsequently causes
a crash when the close function for directories cifs_closedir() is called
which frees up the file->private_data memory while the file is still
listed on the open file list for the tcon.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reported-by: NXiaoli Feng <xifeng@redhat.com>

We should be able to use the same helper functions used for SMB 2.1 and
later versions.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

POSIX allows files with trailing spaces or a trailing period but
SMB3 does not, so convert these using the normal Services For Mac
mapping as we do for other reserved characters such as
	: < > | ? *
This is similar to what Macs do for the same problem over SMB3.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <steve.french@primarydata.com>
Acked-by: NPavel Shilovsky <pshilovsky@samba.org>

Azure server blocks clients that open a socket and don't do anything on it.
In our reconnect scenarios, we can reconnect the tcp session and
detect the socket is available but we defer the negprot and SMB3 session
setup and tree connect reconnection until the next i/o is requested, but
this looks suspicous to some servers who expect SMB3 negprog and session
setup soon after a socket is created.

In the echo thread, reconnect SMB3 sessions and tree connections
that are disconnected.  A later patch will replay persistent (and
resilient) handle opens.

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <steve.french@primarydata.com>
Acked-by: NPavel Shilovsky <pshilovsky@samba.org>

calc_lanman_hash() could return -ENOMEM or other errors, we should check
that everything went fine before using the calculated key.
Signed-off-by: NLuis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated
statically and its size is an "empirical" 5*sizeof(struct
_AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value
comes from or if it was ever appropriate, but it is currently
insufficient: the user and domain name in UTF16 could take 1kB by
themselves. Because of that, build_ntlmssp_auth_blob() might corrupt
memory (out-of-bounds write). The size of ntlmssp_blob in
SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE)
+ 500).

This patch allocates the blob dynamically in
build_ntlmssp_auth_blob().
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>

Currently in build_ntlmssp_auth_blob(), when converting the domain
name to UTF16, CIFS_MAX_USERNAME_LEN limit is used. It should be
CIFS_MAX_DOMAINNAME_LEN. This patch fixes this.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Right now, we send the tgid cross the wire. What we really want to send
though is a hashed fl_owner_t since samba treats this field as a generic
lockowner.

It turns out that because we enforce and release locks locally before
they are ever sent to the server, this patch makes no difference in
behavior. Still, setting OFD locks on the server using the process
pid seems wrong, so I think this patch still makes sense.
Signed-off-by: NJeff Layton <jlayton@poochiereds.net>
Signed-off-by: NSteve French <smfrench@gmail.com>
Acked-by: NPavel Shilovsky <pshilovsky@samba.org>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>

preparation for similar switch in ->setxattr() (see the next commit for
rationale).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove some obsolete comments in the cifs inode_operations
structs that were pointed out by Stephen Rothwell.

CC: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <steve.french@primarydata.com>

The session key is the default keyring set for request_key operations.
This session key is revoked when the user owning the session logs out.
Any long running daemon processes started by this session ends up with
revoked session keyring which prevents these processes from using the
request_key mechanism from obtaining the krb5 keys.

The problem has been reported by a large number of autofs users. The
problem is also seen with multiuser mounts where the share may be used
by processes run by a user who has since logged out. A reproducer using
automount is available on the Red Hat bz.

The patch creates a new keyring which is used to cache cifs spnego
upcalls.

Red Hat bz: 1267754
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Reported-by: NScott Mayhew <smayhew@redhat.com>
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Wrong return code was being returned on SMB3 rmdir of
non-empty directory.

For SMB3 (unlike for cifs), we attempt to delete a directory by
set of delete on close flag on the open. Windows clients set
this flag via a set info (SET_FILE_DISPOSITION to set this flag)
which properly checks if the directory is empty.

With this patch on smb3 mounts we correctly return
 "DIRECTORY NOT EMPTY"
on attempts to remove a non-empty directory.
Signed-off-by: NSteve French <steve.french@primarydata.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>

Signed-off-by: NSteven French <steve.french@primarydata.com>

Only server which map unknown users to guest will allow
access using a non-null NTLMv2_Response.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Only server which map unknown users to guest will allow
access using a non-null LMChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913Signed-off-by: NStefan Metzmacher <metze@samba.org>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

See [MS-NLMP] 3.2.5.1.2 Server Receives an AUTHENTICATE_MESSAGE from the Client:

   ...
   Set NullSession to FALSE
   If (AUTHENTICATE_MESSAGE.UserNameLen == 0 AND
      AUTHENTICATE_MESSAGE.NtChallengeResponse.Length == 0 AND
      (AUTHENTICATE_MESSAGE.LmChallengeResponse == Z(1)
       OR
       AUTHENTICATE_MESSAGE.LmChallengeResponse.Length == 0))
       -- Special case: client requested anonymous authentication
       Set NullSession to TRUE
   ...

Only server which map unknown users to guest will allow
access using a non-null NTChallengeResponse.

For Samba it's the "map to guest = bad user" option.

BUG: https://bugzilla.samba.org/show_bug.cgi?id=11913

CC: Stable <stable@vger.kernel.org>
Signed-off-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

We currently do not check if any delimiter exists before the prefix
path in cifs_compose_mount_options(). Consequently when building the
devname using cifs_build_devname() we can end up with multiple
delimiters separating the UNC and the prefix path.

An issue was reported by the customer mounting a folder within a DFS
share from a Netapp server which uses McAfee antivirus. We have
narrowed down the cause to the use of double backslashes in the file
name used to open the file. This was determined to be caused because of
additional delimiters as a result of the bug.

In addition to changes in cifs_build_devname(), we also fix
cifs_parse_devname() to ignore any preceding delimiter for the prefix
path.

The problem was originally reported on RHEL 6 in RHEL bz 1252721. This
is the upstream version of the fix. The fix was confirmed by looking at
the packet capture of a DFS mount.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

CIFS may be used as lower layer of overlayfs and accessing f_path.dentry can
lead to a crash.

Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Signed-off-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The kiocb already has the new position, so use that.  The only interesting
case is AIO, where we currently don't bother updating ki_pos.  We're about
to free the kiocb after we're done, so we might as well update it to make
everyone's life simpler.

While we're at it also return the bytes written argument passed in if
we were successful so that the boilerplate error switch code in the
callers can go away.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This will allow us to do per-I/O sync file writes, as required by a lot
of fileservers or storage targets.

XXX: Will need a few additional audits for O_DSYNC
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Including blkdev_direct_IO and dax_do_io.  It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use xattr handlers for resolving attribute names.  The amount of setup
code required on cifs is nontrivial, so use the same get and set
functions for all handlers, with switch statements for the different
types of attributes in them.

The set_EA handler can handle NULL values, so we don't need a separate
removexattr function anymore.  Remove the cifs_dbg statements related to
xattr name resolution; they don't add much.  Don't build xattr.o when
CONFIG_CIFS_XATTR is not defined.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If cifs_removexattr finds a "user." or "os2." xattr name prefix, it
skips 5 bytes, one byte too many for "os2.".
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The two values ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT are meant to be
enumerations, not bits in a bit mask.  Use '==' instead of '&' to check
for these values.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Use strcmp(str, name) instead of strncmp(str, name, strlen(name)) for
checking if str and name are the same (as opposed to name being a prefix
of str) in the gexattr and setxattr inode operations.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

sock_owned_by_user should not be used without socket lock held. It seems
to be a common practice to check .owned before lock reclassification, so
provide a little help to abstract this check away.

Cc: linux-cifs@vger.kernel.org
Cc: linux-bluetooth@vger.kernel.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a facility whereby proposed new links to be added to a keyring can be
vetted, permitting them to be rejected if necessary.  This can be used to
block public keys from which the signature cannot be verified or for which
the signature verification fails.  It could also be used to provide
blacklisting.

This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE.

To this end:

 (1) A function pointer is added to the key struct that, if set, points to
     the vetting function.  This is called as:

	int (*restrict_link)(struct key *keyring,
			     const struct key_type *key_type,
			     unsigned long key_flags,
			     const union key_payload *key_payload),

     where 'keyring' will be the keyring being added to, key_type and
     key_payload will describe the key being added and key_flags[*] can be
     AND'ed with KEY_FLAG_TRUSTED.

     [*] This parameter will be removed in a later patch when
     	 KEY_FLAG_TRUSTED is removed.

     The function should return 0 to allow the link to take place or an
     error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the
     link.

     The pointer should not be set directly, but rather should be set
     through keyring_alloc().

     Note that if called during add_key(), preparse is called before this
     method, but a key isn't actually allocated until after this function
     is called.

 (2) KEY_ALLOC_BYPASS_RESTRICTION is added.  This can be passed to
     key_create_or_update() or key_instantiate_and_link() to bypass the
     restriction check.

 (3) KEY_FLAG_TRUSTED_ONLY is removed.  The entire contents of a keyring
     with this restriction emplaced can be considered 'trustworthy' by
     virtue of being in the keyring when that keyring is consulted.

 (4) key_alloc() and keyring_alloc() take an extra argument that will be
     used to set restrict_link in the new key.  This ensures that the
     pointer is set before the key is published, thus preventing a window
     of unrestrictedness.  Normally this argument will be NULL.

 (5) As a temporary affair, keyring_restrict_trusted_only() is added.  It
     should be passed to keyring_alloc() as the extra argument instead of
     setting KEY_FLAG_TRUSTED_ONLY on a keyring.  This will be replaced in
     a later patch with functions that look in the appropriate places for
     authoritative keys.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

none of that stuff can ever be called for NULL or negative
dentry.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and neither can ever be NULL
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

just do ITER_BVEC recvmsg
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>