Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

Fix a gcc4 build error (incomplete element type) in the pxa SharpSL
PM code.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Jared Hulbert

The following patch changes the bus arbiter controller settings
for the Intel PXA27x Application Processor Family.  Up to 5%
better video performance.  It parks the bus on the core while not
in use and sets the arbitration for other bus items.  The patch
only applies changes to the Intel Mainstone development platform.

This patch is not compatible with preproduction Intel PXA27x
silicon.

This patch is based on the Intel Linux Preview Kit released to the
public on 25 Feb. 2005 found at
ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/.
Signed-off-by: NJustin A Treon <justin_treon@yahoo.com>
Signed-off-by: NJared Hulbert <jaredeh@gmail.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

The expansion bus on the IXP46x NPU can be configured for either 32MiB or
16MiB windows and changing the configuration causes the base address for
each chip select for each region to change. Because of this, we cannot
hardcode the physical base as we currently do. This patch checks the
expansion bus configuration registers at runtime to determine the
appropriate window size. Note that this requires that the bootloader
already configured the device sizes appropriately, but I feel that is
valid assumption to make as the bootloader must configure and access
the flash window, the output display (LCD, LEDs, etc) window, and
other expansion bus devices.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Dan Williams

Convert old-style serial devices to platform devices so that printk's are visible during the boot process.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Sascha Hauer

- remove unnecessary mappings
- rename mx1ads_device to cs89x0_device, because
  that's what it is
- fix io/irq resource for cs89x0 device
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

The SL-Cxx00 devices have a power control register in SCOOP that is
shared by both CF and MMC/SD card slots. The CF reset code was resetting
this register leading to various lockups as the MMC power was suddenly
lost. This patch handles the CPR register in a more sensitive manner.

It also removes some unneeded collie specific calls as the reset code
handles this.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

ARM doesn't use ACPI so ARM's apm implementation has no need to depend
on PM_LEGACY. This patch removes that dependency.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

This patch moves a large chunk of the sharpsl_pm driver to
arch/arm/common so that it can be reused on other devices such as the
SL-5500 (collie). It also abstracts some functions from the core into
the machine and platform specific parts of the driver to aid reuse.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Richard Purdie

Add platform code to enable the ohci device on the pxa27x based
Sharp Zaurus Cxx00 devices.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

Add NAS 100d to machine build list and update to new 2.6.15 options.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>

---
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Rod Whitby

PAGE_SHIFT is undeclared in include/asm-arm/arch-ixp4xx/memory.h, identified by the following kernel compilation error:

CC [M] sound/core/memory.o
In file included from include/asm/memory.h:27,
from include/asm/io.h:28,
from sound/core/memory.c:24:
include/asm/arch/memory.h: In function `__arch_adjust_zones':
include/asm/arch/memory.h:28: error: `PAGE_SHIFT' undeclared (first use
in this function)

This patch replaces my previous attempt at fixing this problem (Patch 3214/1) and is based on the following feedback:

Russell King wrote:
> The error you see came up on SA1100.  The best solution was to move
> the __arch_adjust_zones() function out of line.  I suggest ixp4xx
> does the same.

I have moved the function out of line into arch/arm/mach-ixp4xx/common-pci.c as suggested.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

This patch removes referneces to gpio_isr_line_clear() from the
NAS 100d platform implementation.

Depends on 3192/1 and 3215/1
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Rod Whitby

This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product.  The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card.

Work on porting the latest 2.6.x kernel to this device is being done by
the NSLU2-Linux project (the same team who maintains the port to the
Linksys NSLU2 device).  In particular, the majority of this patch was
authored by Alessandro Zummo, based on the work done for MACH_NSLU2
support by the NSLU2-Linux core team of developers.

MACH_NAS100D (as implemented by this patch) can be enabled in jumbo
ixp4xx kernels without any affect on the other machines supported by
that kernel.

This patch applies cleanly against 2.6.15-rc7 and should be trivial to
apply to later kernel versions. It does not depend upon any other
patches.

Modified files (and number of lines inserted):
 arch/arm/mach-ixp4xx/Kconfig           |    8
 arch/arm/mach-ixp4xx/Makefile          |    1
 include/asm-arm/arch-ixp4xx/hardware.h |    1
 include/asm-arm/arch-ixp4xx/irqs.h     |    9
 include/asm-arm/arch-ixp4xx/nas100d.h  |   75
 arch/arm/mach-ixp4xx/nas100d-pci.c     |   77
 arch/arm/mach-ixp4xx/nas100d-power.c   |   69
 arch/arm/mach-ixp4xx/nas100d-setup.c   |  133

-- Rod Whitby (NSLU2-Linux project lead)
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

Other than interrupt masking purposes, this API is only used when
configuring interrupt lines and this patch moves that functionality
directly into the ixp4xx_set_irq_type() implementation as board level
PCI code should not need to worry about those details.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

These are empty, unnecessary functions, so remove them.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since we now only build arch/arm/kernel/dma.c on machine types
which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS
to 0 to indicate this - this definition becomes superfluous.
Remove it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ISA_DMA_API tells the rest of the kernel if the ISA DMA API is
available.  Select this symbol only on machine types which make
use of the ISA DMA API.

Make building of arch/arm/kernel/dma.c depend on this symbol -
if a machine does not support the ISA DMA API, it's pointless
building this file.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There's no need to have DMA initialised at the same time as
interrupts.  Move it to a core_initcall().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The old __address element in struct scatterlist remained from older
kernels because the ARM DMA emulation code made use of it.  Move
this field into struct dma_struct, and convert DMA emulation code
to setup a SG entry as required.

Also, convert DMA emulation code to use the new DMA API rather
than the PCI DMA API.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Allow the compiler to optimise the bus_to_virt(virt_to_bus())
transformation in the ARM ISA DMA interface.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

CLPS711x, EPXA10DB and Integrator contained a dma.c file which has never
been built.  Remove these redundant files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It seems that clk_use() and clk_unuse() are additional complexity
which isn't required anymore.  Remove them from the clock framework
to avoid the additional confusion which they cause, and update all
ARM machine types except for OMAP.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/entry-armv.S has contained a comment suggesting
that asm/hardware.h and asm/arch/irqs.h should be moved into the
asm/arch/entry-macro.S include.  So move the includes to these
two files as required.

Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h
includes which use those facilities, and remove asm/io.h from
kernel/process.c.

Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm
and arch/arm/mach-footbridge.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We are coding the kernel link address into the makefiles, which is
invisibly dependent on PAGE_OFFSET.  If PAGE_OFFSET is changed, the
makefiles also need to be changed.

Make adjustments such that the makefiles encode just the offset from
PAGE_OFFSET for the kernel link address, and use PAGE_OFFSET in the
linker scripts directly.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This should fix multi-threaded core-files

Signed-off-by: stsp@aknet.ru
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sonny has noticed hotplug CPU on ppc64 is broken in 2.6.15-*. One of the
problems is that htab_initialize_secondary is called when a cpu is being
brought up, but it is marked __init.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, we do not pass the correct start_pfn to e820_hole_size, to
calculate holes.  Following patch fixes that.

The bug results in incorrect number of node_present_pages for each pgdat
and causes ugly output in /sys and probably VM inbalances.
Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Sighed-off-by: NShair Fultheim <shai@scalex86.org>
Sighed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix UML compilation when SKAS mode is disabled. Indeed, we were compiling
SKAS-only object files, which failed due to some SKAS-only headers being
excluded from the search path.

Thanks to the bug report from Pekka J Enberg.

Acked-by: Pekka J Enberg <penberg (at) cs ! helsinki ! fi>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Today, when compiling UML, I got warnings for two used unexported symbols:
readdir64 and truncate64. Indeed, my glibc headers are aliasing readdir to
readdir64 and truncate to truncate64 (and so on).

I'm then adding additional exports. Since I've no idea if the symbols where
always provided in the supported glibc's, I've added weak definitions too.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't use printk() where "current_thread_info()" is crap.

Until when we switch to running on init_stack, current_thread_info() evaluates
to crap. Printk uses "current" at times (in detail, &current is evaluated with
CONFIG_DEBUG_SPINLOCK to check the spinlock owner task).

And this leads to random segmentation faults.

Exactly, what happens is that &current = *(current_thread_info()), i.e. round
down $esp and dereference the value. I.e. access the stack below $esp, which
causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's definition is wrong (-1 means "no limit" not 999),
only the Sparc SunOS/Solaris compat code uses it, so
let's just kill it off completely from limits.h and
all referencing code.

Noticed by Ulrich Drepper.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It turns out that commit f9bd170a
broke the cascade from XICS to i8259 on pSeries machines; specifically
we ended up not ever doing the EOI on the XICS for the cascade.  The
result was that interrupts from the serial ports (and presumably any
other devices using ISA interrupts) didn't get through.  This fixes
it and also simplifies the code, by doing the EOI on the XICS in the
xics_get_irq routine after reading and acking the interrupt on the
i8259.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It was a stupid workaround for the "static inline" vs.
"extern inline" issues of long ago, and it is what causes
schedule() to be inlined like crazy into kernel/sched.c
when -Os is specified.

MIPS and S390 should probably do the same.

Now CC_OPTIMIZE_FOR_SIZE can be safely used on sparc64
once more.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now needs to include the type 1 functions ("direct") too.

Reported by Pavel Roskin <proski@gnu.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

The CPM2 interrupt handler does not return success to the IRQ subsystem, which
causes it to kill the IRQ line after 100,000 interrupts.
Signed-off-by: NEdson Seabra <Edson.Seabra@cyclades.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>