提交 945b9579 编写于 作者: R Richard Purdie 提交者: Russell King

[ARM] 3230/1: Sharp Scoop: Fix Shared Power Control Issues

Patch from Richard Purdie

The SL-Cxx00 devices have a power control register in SCOOP that is
shared by both CF and MMC/SD card slots. The CF reset code was resetting
this register leading to various lockups as the MMC power was suddenly
lost. This patch handles the CPR register in a more sensitive manner.

It also removes some unneeded collie specific calls as the reset code
handles this.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 53b7c2b2
......@@ -33,7 +33,6 @@ void reset_scoop(struct device *dev)
SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100; // 00
SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000; // 04
SCOOP_REG(sdev->base,SCOOP_CPR) = 0x0000; // 0C
SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000; // 10
SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000; // 18
SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF; // 14
......@@ -154,6 +153,7 @@ int __init scoop_probe(struct platform_device *pdev)
SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
reset_scoop(&pdev->dev);
SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000;
SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
......
......@@ -127,10 +127,12 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
cpr &= ~0x0002;
if (device == SPITZ_PWR_SD)
cpr &= ~0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
} else {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
}
}
}
......
......@@ -36,9 +36,18 @@
struct scoop_pcmcia_config *platform_scoop_config;
#define SCOOP_DEV platform_scoop_config->devs
static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
{
struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr];
reset_scoop(scoopdev->dev);
/* Shared power controls need to be handled carefully */
if (platform_scoop_config->power_ctrl)
platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr);
else
write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000);
scoopdev->keep_vs = NO_KEEP_VS;
scoopdev->keep_rd = 0;
}
......@@ -208,26 +217,17 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
sharpsl_pcmcia_init_reset(skt);
/* Enable interrupt */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
sharpsl_pcmcia_init_reset(skt);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册