- 26 1月, 2008 15 次提交
-
-
由 Aidan Thornton 提交于
The HVR-900 requires the MTS version of the xc3028 firmware in order to get any sound. The below patch selects this firmware variant on HVR-900 cards, as well as splitting the HVR-950 into its own entry (since I don't know if it uses the MTS variant and it will have to be split off eventually anyway). Signed-off-by: NAidan Thornton <makosoft@googlemail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
With the conversion to the vidio_ioctl2, tvnorms array is not required anymore. Also, removed some code from V4L1 time (VIDEO_MODE_foo), specied at the non-used video_decoder.h. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Hauppauge firmwares can be decoded using tveeprom. This patch adds HVR-900 as a tveeprom client. It also adds xc3028 tuner entry to tveeprom. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Tuner-type were correctly filled only by the hint function. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
Adds autodetection support for the Cinergy200 USB and the VGear PocketTV. Whenever a usb device with generic empia em2800 usb ids is detected the device gets scanned for connected i2c devices. If the device list matches an em2800 device in the device list the model id gets changed accordingly. Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
attached patch adds support for the vgear pockettv. It seems to require a write to another register for audio to work. I checked my old cinergydrv and we did the same register write there. I therefore enabled it for all em2800 based devices. Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds a function to allow trying to detect boards that shares the generic IDs. The current detection method is based at eeprom checksum. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Television is now default; - Add HVR950 name at the entry. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds USB ID for HVR-950. It also adds the callback for handling firmware loading. Thanks to Markus Reichberger for the reset commands. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028. Some work is still may be required to make sure that non-tm6000 drivers will be capable of using tuner-xc2028. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 03 5月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 6月, 2006 3 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - make the following needlessly global functions static: - em28xx-core.c: em28xx_accumulator_set() - em28xx-core.c: em28xx_capture_area_set() - em28xx-core.c: em28xx_scaler_set() - em28xx-core.c: em28xx_isocIrq() - remove the following unused EXPORT_SYMBOL's: - em28xx-cards.c: em28xx_boards - em28xx-cards.c: em28xx_bcount - em28xx-cards.c: em28xx_id_table Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
- Use new routing input defines in em28xx-cards.c - Fix S-Video settings for tvp5150-based cards (input was copied from saa7115 based cards and worked only because S-Video was selected in the default: case) - Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c - Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c - Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c - Add new media/tvp5150.h with the routing defines. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 02 4月, 2006 1 次提交
-
-
由 Hans Verkuil 提交于
Renamed various msp3400 routing defines to be more consistent and less confusing. Esp. the MSP_DSP_OUT defines were confusing since it is really a DSP input. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 3月, 2006 2 次提交
-
-
由 Hans Verkuil 提交于
- implement VIDIOC_INT_S_AUDIO_ROUTING for msp3400 and tvaudio - use the new command in bttv, pvrusb2 and em28xx. - remove the now obsolete MSP_SET_MATRIX from msp3400 (yeah!) - remove the obsolete VIDIOC_S_AUDIO from msp3400. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Moved msp3400.h to msp3400-driver.h. Created media/msp3400.h with the new routing defines and lots of comments. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 2月, 2006 5 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Current xc3028 support is still experimental, requiring more work to be sent to mainstream. It will be kept only at mercurial tree on http://linuxtv.org/hg until fixed. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Current xc3028 support is still experimental, requiring more work to be sent to mainstream. So, it was marked inside some defines, in order to be removed by gentree.pl stript. Script also updated to remove it. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Fixed amux hauppauge hvr900/terratec hybrid xs Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Fixed xc3028 firmware extractor for terratec's emBDA.sys firmware Fixed delay in firmwareupload, now terratec's firmware also works Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Added support for xc3028 to v4l which adds support for: * Terratec Hybrid XS (analogue) * Hauppauge HVR 900 (analogue) Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 07 2月, 2006 3 次提交
-
-
由 Markus Rechberger 提交于
Adding support for Terratec Prodigy XS Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
Changed description of KWorld PVR TV 2800RF Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Markus Rechberger 提交于
- Added terratec hybrid xs product/vendorid - Added gpio audio initialization for kworld pvr 2800rf Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 1月, 2006 1 次提交
-
-
由 Markus Rechberger 提交于
- Hauppauge HVR 900 Composite support Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Created a new ioctl to control I2S speed. Old calls to an inadequate V4L2 API replaced. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 09 11月, 2005 8 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Em28xx cleanups and fixes. - Some cleanups and audio amux adjust. - em28xx will allways try, by default, the biggest size alt. - Fixes audio mux code. - Fixes some logs. - Adds support for digital output for WinTV USB2 board. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Renamed common structures to em28xx Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Module em2820 renamed to em28xx and moved to V4L dir. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Added Pinnacle Dazzle DVC 90 Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Rechberger 提交于
- Fixed settings for MSI Vox USB 2.0 (saa7114 is missing atm) Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Rechberger 提交于
- Modified settings for MSI VOX USB 2.0 Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Fixed log for tveeprom on em28xx cards. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mauro Carvalho Chehab 提交于
- Whitespace Cleanups. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-