mvebu clock changes for v3.14

 - mvebu: add the core divider clock driver
 - sparse cleanup

arm: Xilinx Zynq clk patches for v3.14

- Add support for fclk-enable feature

In some use cases Zynq's FPGA clocks are used as static clock
generators for IP in the FPGA part of the SOC for which no Linux driver
exists and would control those clocks. To avoid automatic
gating of these clocks in such cases a new property - fclk-enable - is
added to the clock controller's DT description to accomodate such use
cases. It's value is a bitmask, where a set bit results in enabling
the corresponding FCLK through the clkc.

FPGA clocks are handled following the rules below:

If an FCLK is not enabled by bootloaders, that FCLK will be disabled in
Linux. Drivers can enable and control it through the CCF as usual.

If an FCLK is enabled by bootloaders AND the corresponding bit in the
'fclk-enable' DT property is set, that FCLK will be enabled by the clkc,
resulting in an off by one reference count for that clock. Ensuring it
will always be running.
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Extra semicolon is redundant. Remove it.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'vtwm_pll_ops' is local to this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'of_cpu_clk_setup' is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clk_sp810_timerclken_of_get is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

'div_reg' is a pointer. Assign NULL instead of 0.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

tegra_clk_periph_nodiv_ops is used only in this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Local variables used only in this file are made static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

clk_frac_ops is local to this file. Make it static.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add a driver for SILabs 570, 571, 598, 599 programmable oscillators.
The devices generate low-jitter clock signals and are reprogrammable via
an I2C interface.
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Adding clocks from a kernel module can cause a NULL pointer
dereference if the parent of a clock is added after the clock is
added. This happens because __clk_init() iterates over the list
of orphans and reparents the orphans to the clock being
registered before creating the debugfs entry for the clock.
Create the debugfs entry first before reparenting the orphans.

Unable to handle kernel NULL pointer dereference at virtual address 00000028
pgd = ef3e4000
[00000028] *pgd=bf810831
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: mmcc_8960(+)
CPU: 0 PID: 52 Comm: modprobe Not tainted 3.12.0-rc2-00023-g1021a28-dirty #659
task: ef319200 ti: ef3a6000 task.ti: ef3a6000
PC is at lock_rename+0x24/0xc4
LR is at debugfs_rename+0x34/0x208
pc : [<c0317238>]    lr : [<c047dfe4>]    psr: 00000013
sp : ef3a7b88  ip : ef3a7ba8  fp : ef3a7ba4
r10: ef3d51cc  r9 : ef3bc680  r8 : ef3d5210
r7 : ef3bc640  r6 : eee287e0  r5 : eee287e0  r4 : 00000000
r3 : ef3bc640  r2 : 00000000  r1 : eee287e0  r0 : 00000000
Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5787d  Table: af3e406a  DAC: 00000015
Process modprobe (pid: 52, stack limit = 0xef3a6240)
Stack: (0xef3a7b88 to 0xef3a8000)
7b80:                   ef3bc640 ee4047e0 00000000 eee287e0 ef3a7bec ef3a7ba8
7ba0: c047dfe4 c0317220 ef3bc680 ef3d51cc ef3a7bdc ef3a7bc0 c06e29d0 c0268784
7bc0: c08946e8 ef3d5210 00000000 ef3bc700 ef3d5290 ef3d5210 ef3bc680 ef3d51cc
7be0: ef3a7c0c ef3a7bf0 c05b9e9c c047dfbc 00000000 00000000 ef3d5210 ef3d5290
7c00: ef3a7c24 ef3a7c10 c05baebc c05b9e30 00000001 00000001 ef3a7c64 ef3a7c28
7c20: c05bb124 c05bae9c bf000cd8 ef3bc7c0 000000d0 c0ff129c bf001774 00000002
7c40: ef3bc740 ef3d5290 ef0f9a10 bf001774 bf00042c 00000061 ef3a7c8c ef3a7c68
7c60: c05bb480 c05baed8 bf001774 ef3d5290 ef0f9a10 bf001774 ef38bc10 ef0f9a00
7c80: ef3a7cac ef3a7c90 c05bb5a8 c05bb3a0 bf001774 00000062 ef0f9a10 ef38bc18
7ca0: ef3a7cec ef3a7cb0 bf00010c c05bb56c 00000000 ef38ba00 00000000 ef3d60d0
7cc0: ef3a7cdc c0fefc24 ef0f9a10 c0a091c0 bf000d24 00000000 bf0029f0 bf006000
7ce0: ef3a7cfc ef3a7cf0 c05156c0 bf000040 ef3a7d2c ef3a7d00 c0513f5c c05156a8
7d00: ef3a7d2c ef0f9a10 ef0f9a10 bf000d24 ef0f9a44 c09ca588 00000000 bf006000
7d20: ef3a7d4c ef3a7d30 c05142b8 c0513ecc ef0fd25c 00000000 bf000d24 c0514214
7d40: ef3a7d74 ef3a7d50 c0512030 c0514220 ef0050a8 ef0fd250 ef0050f8 bf000d24
7d60: ef37c100 c09ed150 ef3a7d84 ef3a7d78 c05139c8 c0511fd8 ef3a7
7d80: c051344c c05139a8 bf000864 c09ca588 ef3a7db4 bf000d24 bf002
7da0: c09ca588 00000000 ef3a7dcc ef3a7db8 c05149dc c0513360 ef3a7
7dc0: ef3a7ddc ef3a7dd0 c0515914 c0514960 ef3a7dec ef3a7de0 bf006
7de0: ef3a7e74 ef3a7df0 c0208800 bf00600c ef3a7e1c ef3a7e00 c04c5
7e00: ffffffff c09d46c4 00000000 bf0029a8 ef3a7e34 ef3a7e20 c024c
7e20: ffffffff c09d46c4 ef3a7e5c ef3a7e38 c024e2fc c024ce40 00000
7e40: ef3a7f48 bf0029b4 bf0029a8 271aeb1c ef3a7f48 bf0029a8 00000001 ef383c00
7e60: bf0029f0 00000001 ef3a7f3c ef3a7e78 c028fac4 c0208718 bf0029b4 00007fff
7e80: c028cd58 000000d2 f0065000 00000000 ef3a7ebc 00000000 00000000 bf0029b4
7ea0: 00000000 bf0029ac bf0029b4 ef3a6000 ef3a7efc c08bf128 00000000 00000000
7ec0: 00000000 00000000 00000000 00000000 6e72656b 00006c65 00000000 00000000
7ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7f00: 00000000 00000000 00000000 271aeb1c ef3a7f2c 00016376 b6f38008 001d3774
7f20: 00000080 c020f968 ef3a6000 00000000 ef3a7fa4 ef3a7f40 c02904dc c028e178
7f40: c020f898 010ccfa8 f0065000 00016376 f0073f60 f0073d7d f007a1e8 00002b24
7f60: 000039e4 00000000 00000000 00000000 0000002f 00000030 00000019 00000016
7f80: 00000012 00000000 00000000 010de1b2 b6f38008 010ccfa8 00000000 ef3a7fa8
7fa0: c020f6c0 c0290434 010de1b2 b6f38008 b6f38008 00016376 001d3774 00000000
7fc0: 010de1b2 b6f38008 010ccfa8 00000080 010de1b2 bedb6f90 010de1c9 0001d8dc
7fe0: 0000000c bedb674c 0001ce30 000094c4 60000010 b6f38008 00000008 0000001d
[<c0317238>] (lock_rename+0x24/0xc4) from [<c047dfe4>] (debugfs_rename+0x34/0x208)
[<c047dfe4>] (debugfs_rename+0x34/0x208) from [<c05b9e9c>] (clk_debug_reparent+0x78/0xc0)
[<c05baebc>] (__clk_reparent+0x2c/0x3c) from [<c05bb124>] (__clk_init+0x258/0x4c8)
[<c05bb124>] (__clk_init+0x258/0x4c8) from [<c05bb480>] (_clk_register+0xec/0x1cc)
[<c05bb480>] (_clk_register+0xec/0x1cc) from [<c05bb5a8>] (devm_clk_register+0x48/0x7c)
[<c05bb5a8>] (devm_clk_register+0x48/0x7c) from [<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960])
[<bf00010c>] (msm_mmcc_8960_probe+0xd8/0x190 [mmcc_8960]) from [<c05156c0>] (platform_drv_probe+0x24/0x28)
[<c05156c0>] (platform_drv_probe+0x24/0x28) from [<c0513f5c>] (driver_probe_device+0x9c/0x354)
[<c0513f5c>] (driver_probe_device+0x9c/0x354) from [<c05142b8>] (__driver_attach+0xa4/0xa8)
[<c05142b8>] (__driver_attach+0xa4/0xa8) from [<c0512030>] (bus_for_each_dev+0x64/0x98)
[<c0512030>] (bus_for_each_dev+0x64/0x98) from [<c05139c8>] (driver_attach+0x2c/0x30)
[<c05139c8>] (driver_attach+0x2c/0x30) from [<c051344c>] (bus_add_driver+0xf8/0x2a8)
[<c051344c>] (bus_add_driver+0xf8/0x2a8) from [<c05149dc>] (driver_register+0x88/0x104)
[<c05149dc>] (driver_register+0x88/0x104) from [<c0515914>] (__platform_driver_register+0x58/0x6c)
[<c0515914>] (__platform_driver_register+0x58/0x6c) from [<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960])
[<bf006018>] (msm_mmcc_8960_driver_init+0x18/0x24 [mmcc_8960]) from [<c0208800>] (do_one_initcall+0xf4/0x1b8)
[<c0208800>] (do_one_initcall+0xf4/0x1b8) from [<c028fac4>] (load_module+0x1958/0x22bc)
[<c028fac4>] (load_module+0x1958/0x22bc) from [<c02904dc>] (SyS_init_module+0xb4/0x120)
[<c02904dc>] (SyS_init_module+0xb4/0x120) from [<c020f6c0>] (ret_fast_syscall+0x0/0x48)
Code: e1500001 e1a04000 e1a05001 0a000021 (e5903028)
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Merge tag 'clk-hisilicon' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into clk-next-hisilicon

MSTP clocks are gate clocks controlled through a register that handles
up to 32 clocks. The register is often sparsely populated.

Those clocks are found on Renesas ARM SoCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

DIV6 clocks are divider gate clocks controlled through a single
register. The divider is expressed on 6 bits, hence the name, and can
take values from 1/1 to 1/64.

Those clocks are found on Renesas ARM SoCs.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The R-Car Gen2 SoCs (R8A7790 and R8A7791) have several clocks that are
too custom to be supported in a generic driver. Those clocks can be
divided in two categories:

- Fixed rate clocks with multiplier and divisor set according to boot
  mode configuration

- Custom divider clocks with SoC-specific divider values

This driver supports both.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Add missing CLK_SET_RATE_PARENT flag for gate clock.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

The flags on dividers should be CLK_DIVIDER_HIWORD_MASK, not
CLK_MUX_HIWORD_MASK.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Fixes cpll control and lock register offset values for Exynos5420 SoC.
Signed-off-by: NChander Kashyap <chander.kashyap@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

Enable common clock driver of Hi3620 SoC. clkgate-seperated driver is
used to support the clock gate that enable/disable/status registers
are seperated.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Merge branch 'clk-tegra-next' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next-tegra

Allwinner sunXi SoCs clock changes

Those are mostly random fixes, except for one patch to the composite
clock that adds support for automatic reparenting.

Conflicts:
	drivers/clk/sunxi/clk-sunxi.c

In case of error, the function __clk_lookup() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>

clk_round_rate() can be used by drivers to determine whether or not a
frequency is supported by the clock. The current Tegra clock driver
outputs an error message and a stacktrace when the requested rate isn't
supported. That's fine for clk_set_rate(), but it's confusing when all
the driver does is query whether or not a frequency is supported.
Signed-off-by: NThierry Reding <treding@nvidia.com>

The function socfpga_clk_init() can support clocks that do not have a divider
register, but a fixed-divider that can be read from DTS. Therefore, the "reg"
property is not a failing condition for socfpga_clk_init().
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The required properties are not named "div" and "mult",
but rather "clock-div" and "clock-mult".
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

[Maybe the third time will be the charm. -Alex]

If CONFIG_COMMON_CLK_DEBUG is defined, clk_debug_create_one() is
called to populate a debugfs directory with a few entries that are
common for all clock types.

If an error happens after creating the first one debugfs_remove() is
called on the clock's directory.  The problem with this is that no
cleanup is done on the debugfs files already created in that
directory, so the directory never actually gets removed.   This
problem is silently ignored.

Fix this by calling debugfs_remove_recursive() instead.  Reset the
clk->dentry field to null afterward, to ensure it can't be mistaken
as a valid pointer.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

The low-power DSI clocks are used during host-driven transactions on the
DSI bus. Documentation recommends that they be children of PLLP and run
at a frequency of at least 52 MHz.
Signed-off-by: NThierry Reding <treding@nvidia.com>

This clock is needed to ensure the FUSE registers can be accessed
without freezing the system.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>

The clock for the PWM controller is slightly different from other
peripheral clocks on Tegra30. The clock source mux field start at
bit position 28 rather than 30.
Signed-off-by: NThierry Reding <treding@nvidia.com>

There are two GPUs on Tegra30 and each of them uses a separate clock, so
the secondary clock needs to be initialized in order for the gr3d module
to work properly.
Signed-off-by: NThierry Reding <treding@nvidia.com>

Add disp1 and disp2 clocks to the clock initialization table. These
clocks are required for display and HDMI support.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Adding suspend/resume function for tegra_cpu_car_ops. We only save and
restore the setting of the clock of CoreSight. Other clocks still need
to be taken care by clock driver.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Acked-by: NStephen Warren <swarren@nvidia.com>

Hook the functions for CPU hotplug support. After the CPU is hot
unplugged, the flow controller will handle to clock gate the CPU clock.
But still need to implement an empty function to avoid warning message.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: NJoseph Lo <josephl@nvidia.com>

Implement clock support for Tegra124.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>

Tegra124 introduces a number of new peripheral clocks. This patch adds those
to the common peripheral clock code.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>

Tegra124 introduces a number of a new clocks. Introduce the corresponding
the IDs for them.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>