Remove the now unnecessary memset too.
Signed-off-by: NJoe Perches <joe@perches.com>
Mike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Function pci_enable_msix_exact() is a variation of
pci_enable_msix_range() that allows a device driver
to request a particular number of MSI-X interrupts,
rather than any number within a specified range.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

Store the pointer to the page there, so we can always safely
reference it from end_io context where ->bio may have been
cleared.
Signed-off-by: NJens Axboe <axboe@fb.com>

This was used in the olden days, back when onions were proper
yellow. Basically it mapped to the current buffer to be
transferred. With highmem being added more than a decade ago,
most drivers map pages out of a bio, and rq->buffer isn't
pointing at anything valid.

Convert old style drivers to just use bio_data().

For the discard payload use case, just reference the page
in the bio.
Signed-off-by: NJens Axboe <axboe@fb.com>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

When enabling MSI-X interrupts fails due to lack of memory
the call to pci_disable_msix() is missed and the device is
left with MSI-X interrupts enabled while the driver assumes
otherwise. This update fixes the described misbehaviour and
cleans up the code of skd_release_msix() function.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

When enabling MSI-X, interrupts are requested for SKD_MAX_MSIX_COUNT
entries in skdev->msix_entries array, while the number of actually
allocated entries is skdev->msix_count. This might lead to an out of
boundary access in case number of allocated entries is less than
SKD_MAX_MSIX_COUNT. This update fixes the described misbehaviour.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

Mark functions skd_skmsg_state_to_str() and skd_skreq_state_to_str() as
static in skd_main.c because they are not used outside this file.

This eliminates the following warnings in skd_main.c:
drivers/block/skd_main.c:5272:13: warning: no previous prototype for ‘skd_skmsg_state_to_str’ [-Wmissing-prototypes]
drivers/block/skd_main.c:5284:13: warning: no previous prototype for ‘skd_skreq_state_to_str’ [-Wmissing-prototypes]
Signed-off-by: NRashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reorder placement of skd_construct(), skd_cons_sg_list(), skd_destruct()
and skd_free_sg_list() functions. Then remove no longer needed function
prototypes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev and skdev->pdev->bus are always different than NULL in
skd_do_inq_page_da() so simplify the code accordingly.

Also cache skdev->pdev value in pdev variable while at it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev is set to pdev twice in skd_pci_probe(), first time
through skd_construct() call and the second time directly in
the function. Remove the second assignment as it is not needed.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use <asm/unaligned.h> instead of <asm-generic/unaligned.h>.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is not a SCSI host driver so remove SCSI subsystem specific
includes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Register block device in skd_pci_probe() instead of in skd_init() so it
is registered only if some devices are present (currently it is always
registered when the driver is loaded). Please note that this change
depends on the fact that register_blkdev(0, ...) never returns 0.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* change priority level from KERN_INFO to KERN_ERR
* add "skd: " prefix
* do minor CodingStyle fixes

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

register_blkdev() is called before pci_register_driver() in skd_init()
so unregister_blkdev() should be called after pci_unregister_driver()
in skd_exit(). Fix it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove skd_flush_cmd structure and skd_flush_slab.
Remove skd_end_request wrapper around skd_end_request_blk.
Remove skd_requeue_request, use blk_requeue_request directly.
Cleanup some comments (remove "bio" info) and whitespace.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just call the block functions directly, don't wrap them
in skd helpers. With only one queueing model enabled, there's
no point in doing that.

Also kill the ->start_time and ->bio from the skd_request_context,
we don't use those anymore.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The skd driver has a selectable rq or bio based queueing model.
For 3.14, we want to turn this into a single blk-mq interface
instead. With the immutable biovecs being merged in 3.13, the
bio model would need patches to even work. So rip it out, with
a conversion pending for blk-mq in the next release.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix to return -ENOMEM in the skd construct error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replaced DPRINTK() and VPRINTK() with pr_debug().
Signed-off-by: NRamprasad C <ramprasad.chinthekindi@hgst.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes checkpatch.pl errors for assignment in if condition.
It also removes unused readq / readl function calls.

As Andrew had disabled the compilation of drivers for 32 bit,
I have modified format specifiers in few VPRINTKs to avoid warnings
during 64 bit compilation.
Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Reviewed-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Signed-off-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>

Folded patch, contributions to clean up this driver from:

Jens Axboe
Dan Carpenter
Andrew Morton
Signed-off-by: NJens Axboe <axboe@kernel.dk>