提交 f721bb0d 编写于 作者: A Akhil Bhansali 提交者: Jens Axboe

skd: Fix checkpatch ERRORS and removed unused functions

This patch fixes checkpatch.pl errors for assignment in if condition.
It also removes unused readq / readl function calls.

As Andrew had disabled the compilation of drivers for 32 bit,
I have modified format specifiers in few VPRINTKs to avoid warnings
during 64 bit compilation.
Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Reviewed-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
上级 8c49a77c
......@@ -420,14 +420,10 @@ static inline void skd_reg_write32(struct skd_device *skdev, u32 val,
if (likely(skdev->dbg_level < 2)) {
writel(val, skdev->mem_map[1] + offset);
barrier();
readl(skdev->mem_map[1] + offset);
barrier();
} else {
barrier();
writel(val, skdev->mem_map[1] + offset);
barrier();
readl(skdev->mem_map[1] + offset);
barrier();
VPRINTK(skdev, "offset %x = %x\n", offset, val);
}
}
......@@ -438,14 +434,10 @@ static inline void skd_reg_write64(struct skd_device *skdev, u64 val,
if (likely(skdev->dbg_level < 2)) {
writeq(val, skdev->mem_map[1] + offset);
barrier();
readq(skdev->mem_map[1] + offset);
barrier();
} else {
barrier();
writeq(val, skdev->mem_map[1] + offset);
barrier();
readq(skdev->mem_map[1] + offset);
barrier();
VPRINTK(skdev, "offset %x = %016llx\n", offset, val);
}
}
......@@ -1656,18 +1648,36 @@ static int skd_ioctl_sg_io(struct skd_device *skdev, fmode_t mode,
goto out;
}
if ((rc = skd_sg_io_get_and_check_args(skdev, &sksgio)) ||
(rc = skd_sg_io_obtain_skspcl(skdev, &sksgio)) ||
(rc = skd_sg_io_prep_buffering(skdev, &sksgio)) ||
(rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_TO_DEV)))
rc = skd_sg_io_get_and_check_args(skdev, &sksgio);
if (rc)
goto out;
rc = skd_sg_io_obtain_skspcl(skdev, &sksgio);
if (rc)
goto out;
rc = skd_sg_io_prep_buffering(skdev, &sksgio);
if (rc)
goto out;
rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_TO_DEV);
if (rc)
goto out;
if ((rc = skd_sg_io_send_fitmsg(skdev, &sksgio)) ||
(rc = skd_sg_io_await(skdev, &sksgio)))
rc = skd_sg_io_send_fitmsg(skdev, &sksgio);
if (rc)
goto out;
if ((rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_FROM_DEV)) ||
(rc = skd_sg_io_put_status(skdev, &sksgio)))
rc = skd_sg_io_await(skdev, &sksgio);
if (rc)
goto out;
rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_FROM_DEV);
if (rc)
goto out;
rc = skd_sg_io_put_status(skdev, &sksgio);
if (rc)
goto out;
rc = 0;
......@@ -4556,11 +4566,10 @@ static int skd_cons_skmsg(struct skd_device *skdev)
int rc = 0;
u32 i;
VPRINTK(skdev, "skmsg_table kzalloc, struct %u, count %u total %lu\n",
VPRINTK(skdev, "skmsg_table kzalloc, struct %lu, count %u total %lu\n",
sizeof(struct skd_fitmsg_context),
skdev->num_fitmsg_context,
(unsigned long) sizeof(struct skd_fitmsg_context) *
skdev->num_fitmsg_context);
sizeof(struct skd_fitmsg_context) * skdev->num_fitmsg_context);
skdev->skmsg_table = kzalloc(sizeof(struct skd_fitmsg_context)
*skdev->num_fitmsg_context, GFP_KERNEL);
......@@ -4611,7 +4620,7 @@ static int skd_cons_skreq(struct skd_device *skdev)
int rc = 0;
u32 i;
VPRINTK(skdev, "skreq_table kzalloc, struct %u, count %u total %u\n",
VPRINTK(skdev, "skreq_table kzalloc, struct %lu, count %u total %lu\n",
sizeof(struct skd_request_context),
skdev->num_req_context,
sizeof(struct skd_request_context) * skdev->num_req_context);
......@@ -4623,7 +4632,7 @@ static int skd_cons_skreq(struct skd_device *skdev)
goto err_out;
}
VPRINTK(skdev, "alloc sg_table sg_per_req %u scatlist %u total %u\n",
VPRINTK(skdev, "alloc sg_table sg_per_req %u scatlist %lu total %lu\n",
skdev->sgs_per_request, sizeof(struct scatterlist),
skdev->sgs_per_request * sizeof(struct scatterlist));
......@@ -4668,7 +4677,7 @@ static int skd_cons_skspcl(struct skd_device *skdev)
int rc = 0;
u32 i, nbytes;
VPRINTK(skdev, "skspcl_table kzalloc, struct %u, count %u total %u\n",
VPRINTK(skdev, "skspcl_table kzalloc, struct %lu, count %u total %lu\n",
sizeof(struct skd_special_context),
skdev->n_special,
sizeof(struct skd_special_context) * skdev->n_special);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册