- 14 1月, 2014 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit d1ba277e. Tejun writes: I'm sorry but can you please revert the whole series? get_active() waiting while a node is deactivated has potential to lead to deadlock and that deactivate/reactivate interface is something fundamentally flawed and that cgroup will have to work with the remove_self() like everybody else. IOW, I think the first posting was correct. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 88533f99. Tejun writes: I'm sorry but can you please revert the whole series? get_active() waiting while a node is deactivated has potential to lead to deadlock and that deactivate/reactivate interface is something fundamentally flawed and that cgroup will have to work with the remove_self() like everybody else. IOW, I think the first posting was correct. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 1月, 2014 1 次提交
-
-
由 Tejun Heo 提交于
895a068a ("kernfs: make kernfs_get_active() block if the node is deactivated but not removed") added "struct kernfs_root *root = kernfs_root(kn);" at the head of the function; however, the parameter @kn is checked for later implying that the function may be called with NULL. This means that we may end up invoking kernfs_root() with NULL which will oops. None of the existing users invokes removal with NULL @kn, so this bug doesn't actually trigger. We can relocate kernfs_root() invocation after NULL check; however, allowing NULL param tends to cause more confusion than actually helping anything. As there's no existing user, let's remove the spurious NULL check. This bug was detected by smatch. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 1月, 2014 15 次提交
-
-
由 Russell King 提交于
Subsystems such as ALSA, DRM and others require a single card-level device structure to represent a subsystem. However, firmware tends to describe the individual devices and the connections between them. Therefore, we need a way to gather up the individual component devices together, and indicate when we have all the component devices. We do this in DT by providing a "superdevice" node which specifies the components, eg: imx-drm { compatible = "fsl,drm"; crtcs = <&ipu1>; connectors = <&hdmi>; }; The superdevice is declared into the component support, along with the subcomponents. The superdevice receives callbacks to locate the subcomponents, and identify when all components are present. At this point, we bind the superdevice, which causes the appropriate subsystem to be initialised in the conventional way. When any of the components or superdevice are removed from the system, we unbind the superdevice, thereby taking the subsystem down. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
All device_schedule_callback_owner() users are converted to use device_remove_file_self(). Remove now unused {sysfs|device}_schedule_callback_owner(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
driver-core now supports synchrnous self-deletion of attributes and the asynchrnous removal mechanism is scheduled for removal. Use it instead of device_schedule_callback(). * Conversions in arch/s390/pci/pci_sysfs.c and drivers/s390/block/dcssblk.c are straightforward. * drivers/s390/cio/ccwgroup.c is a bit more tricky because ccwgroup_notifier() was (ab)using device_schedule_callback() to purely obtain a process context to kick off ungroup operation which may block from a notifier callback. Rename ccwgroup_ungroup_callback() to ccwgroup_ungroup() and make it take ccwgroup_device * instead. The new function is now called directly from ccwgroup_ungroup_store(). ccwgroup_notifier() chain is updated to explicitly bounce through ccwgroup_device->ungroup_work. This also removes possible failure from memory pressure. Only compile-tested. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
driver-core now supports synchrnous self-deletion of attributes and the asynchrnous removal mechanism is scheduled for removal. Use it instead of device_schedule_callback(). This makes "delete" behave synchronously. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
driver-core now supports synchrnous self-deletion of attributes and the asynchrnous removal mechanism is scheduled for removal. Use it instead of device_schedule_callback(). This makes "remove" behave synchronously. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
Sometimes it's necessary to implement a node which wants to delete nodes including itself. This isn't straightforward because of kernfs active reference. While a file operation is in progress, an active reference is held and kernfs_remove() waits for all such references to drain before completing. For a self-deleting node, this is a deadlock as kernfs_remove() ends up waiting for an active reference that itself is sitting on top of. This currently is worked around in the sysfs layer using sysfs_schedule_callback() which makes such removals asynchronous. While it works, it's rather cumbersome and inherently breaks synchronicity of the operation - the file operation which triggered the operation may complete before the removal is finished (or even started) and the removal may fail asynchronously. If a removal operation is immmediately followed by another operation which expects the specific name to be available (e.g. removal followed by rename onto the same name), there's no way to make the latter operation reliable. The thing is there's no inherent reason for this to be asynchrnous. All that's necessary to do this synchronous is a dedicated operation which drops its own active ref and deactivates self. This patch implements kernfs_remove_self() and its wrappers in sysfs and driver core. kernfs_remove_self() is to be called from one of the file operations, drops the active ref and deactivates using __kernfs_deactivate_self(), removes the self node, and restores active ref to the dead node using __kernfs_reactivate_self() so that the ref is balanced afterwards. __kernfs_remove() is updated so that it takes an early exit if the target node is already fully removed so that the active ref restored by kernfs_remove_self() after removal doesn't confuse the deactivation path. This makes implementing self-deleting nodes very easy. The normal removal path doesn't even need to be changed to use kernfs_remove_self() for the self-deleting node. The method can invoke kernfs_remove_self() on itself before proceeding the normal removal path. kernfs_remove() invoked on the node by the normal deletion path will simply be ignored. This will replace sysfs_schedule_callback(). A subtle feature of sysfs_schedule_callback() is that it collapses multiple invocations - even if multiple removals are triggered, the removal callback is run only once. An equivalent effect can be achieved by testing the return value of kernfs_remove_self() - only the one which gets %true return value should proceed with actual deletion. All other instances of kernfs_remove_self() will wait till the enclosing kernfs operation which invoked the winning instance of kernfs_remove_self() finishes and then return %false. This trivially makes all users of kernfs_remove_self() automatically show correct synchronous behavior even when there are multiple concurrent operations - all "echo 1 > delete" instances will finish only after the whole operation is completed by one of the instances. v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing and sysfs_remove_file_self() had incorrect return type. Fix it. Reported by kbuild test bot. v3: Updated to use __kernfs_{de|re}activate_self(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
This patch implements four functions to manipulate deactivation state - deactivate, reactivate and the _self suffixed pair. A new fields kernfs_node->deact_depth is added so that concurrent and nested deactivations are handled properly. kernfs_node->hash is moved so that it's paired with the new field so that it doesn't increase the size of kernfs_node. A kernfs user's lock would normally nest inside active ref but during removal the user may want to perform kernfs_remove() while holding the said lock, which would introduce a reverse locking dependency. This function can be used to break such reverse dependency by allowing deactivation step to performed separately outside user's critical section. This will also be used implement kernfs_remove_self(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
Currently, kernfs_get_active() fails if the target node is deactivated. This is fine as a node always gets removed after deactivation; however, we're gonna add reactivation so the assumption won't hold. It'd be incorrect for kernfs_get_active() to fail for a node which was deactivated only temporarily. This patch makes kernfs_get_active() block if the node is deactivated but not removed. If the node gets reactivated (not yet implemented), it will be retried and succeed. If the node gets removed, it will be woken up and fail. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were added because there were operations which should be performed outside kernfs_mutex after adding and removing kernfs_nodes. The necessary operations were recorded in kernfs_addrm_cxt and performed by kernfs_addrm_finish(); however, after the recent changes which relocated deactivation and unmapping so that they're performed directly during removal, the only operation kernfs_addrm_finish() performs is kernfs_put(), which can be moved inside the removal path too. This patch moves the kernfs_put() of the base ref to __kernfs_remove() and remove kernfs_addrm_cxt and kernfs_addrm_start/finish(). * kernfs_add_one() is updated to grab and release the parent's active ref and kernfs_mutex itself. kernfs_get/put_active() and kernfs_addrm_start/finish() invocations around it are removed from all users. * __kernfs_remove() puts an unlinked node directly instead of chaining it to kernfs_addrm_cxt. Its callers are updated to grab and release kernfs_mutex instead of calling kernfs_addrm_start/finish() around it. v2: Updated to fit the v2 restructuring of removal path. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
kernfs_unmap_bin_file() is supposed to unmap all memory mappings of the target file before kernfs_remove() finishes; however, it currently is being called from kernfs_addrm_finish() and has the same race problem as the original implementation of deactivation when there are multiple removers - only the remover which snatches the node to its addrm_cxt->removed list is guaranteed to wait for its completion before returning. It can be fixed by moving kernfs_unmap_bin_file() invocation from kernfs_addrm_finish() to __kernfs_remove(). The function may be called multiple times but that shouldn't do any harm. We end up dropping kernfs_mutex in the removal loop and the node may be removed inbetween by someone else. kernfs_unlink_sibling() is updated to test whether the node has already been removed and return accordingly. __kernfs_remove() in turn performs post-unlinking cleanup only if it actually unlinked the node. KERNFS_HAS_MMAP test is moved out of the unmap function into __kernfs_remove() so that we don't unlock kernfs_mutex unnecessarily. While at it, drop the now meaningless "bin" qualifier from the function name. v2: Rewritten to fit the v2 restructuring of removal path. HAS_MMAP test relocated. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
The recursive nature of kernfs_remove() means that, even if kernfs_remove() is not allowed to be called multiple times on the same node, there may be race conditions between removal of parent and its descendants. While we can claim that kernfs_remove() shouldn't be called on one of the descendants while the removal of an ancestor is in progress, such rule is unnecessarily restrictive and very difficult to enforce. It's better to simply allow invoking kernfs_remove() as the caller sees fit as long as the caller ensures that the node is accessible. The current behavior in such situations is broken. Whoever enters removal path first takes the node off the hierarchy and then deactivates. Following removers either return as soon as it notices that it's not the first one or can't even find the target node as it has already been removed from the hierarchy. In both cases, the following removers may finish prematurely while the nodes which should be removed and drained are still being processed by the first one. This patch restructures so that multiple removers, whether through recursion or direction invocation, always follow the following rules. * When there are multiple concurrent removers, only one puts the base ref. * Regardless of which one puts the base ref, all removers are blocked until the target node is fully deactivated and removed. To achieve the above, removal path now first deactivates the subtree, drains it and then unlinks one-by-one. __kernfs_deactivate() is called directly from __kernfs_removal() and drops and regrabs kernfs_mutex for each descendant to drain active refs. As this means that multiple removers can enter __kernfs_deactivate() for the same node, the function is updated so that it can handle multiple deactivators of the same node - only one actually deactivates but all wait till drain completion. The restructured removal path guarantees that a removed node gets unlinked only after the node is deactivated and drained. Combined with proper multiple deactivator handling, this guarantees that any invocation of kernfs_remove() returns only after the node itself and all its descendants are deactivated, drained and removed. v2: Draining separated into a separate loop (used to be in the same loop as unlink) and done from __kernfs_deactivate(). This is to allow exposing deactivation as a separate interface later. Root node removal was broken in v1 patch. Fixed. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
KERNFS_REMOVED is used to mark half-initialized and dying nodes so that they don't show up in lookups and deny adding new nodes under or renaming it; however, its role overlaps those of deactivation and removal from rbtree. It's necessary to deny addition of new children while removal is in progress; however, this role considerably intersects with deactivation - KERNFS_REMOVED prevents new children while deactivation prevents new file operations. There's no reason to have them separate making things more complex than necessary. KERNFS_REMOVED is also used to decide whether a node is still visible to vfs layer, which is rather redundant as equivalent determination can be made by testing whether the node is on its parent's children rbtree or not. This patch removes KERNFS_REMOVED. * Instead of KERNFS_REMOVED, each node now starts its life deactivated. This means that we now use both atomic_add() and atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN. The compiler generates an overflow warnings when negating INT_MIN as the negation can't be represented as a positive number. Nothing is actually broken but let's bump BIAS by one to avoid the warnings for archs which negates the subtrahend.. * KERNFS_REMOVED tests in add and rename paths are replaced with kernfs_get/put_active() of the target nodes. Due to the way the add path is structured now, active ref handling is done in the callers of kernfs_add_one(). This will be consolidated up later. * kernfs_remove_one() is updated to deactivate instead of setting KERNFS_REMOVED. This removes deactivation from kernfs_deactivate(), which is now renamed to kernfs_drain(). * kernfs_dop_revalidate() now tests RB_EMPTY_NODE(&kn->rb) instead of KERNFS_REMOVED and KERNFS_REMOVED test in kernfs_dir_pos() is dropped. A node which is removed from the children rbtree is not included in the iteration in the first place. This means that a node may be visible through vfs a bit longer - it's now also visible after deactivation until the actual removal. This slightly enlarged window difference doesn't make any difference to the userland. * Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with checks on the active ref. * Some comment style updates in the affected area. v2: Reordered before removal path restructuring. kernfs_active() dropped and kernfs_get/put_active() used instead. RB_EMPTY_NODE() used in the lookup paths. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
There currently are two mechanisms gating active ref lockdep annotations - KERNFS_LOCKDEP flag and KERNFS_ACTIVE_REF type mask. The former disables lockdep annotations in kernfs_get/put_active() while the latter disables all of kernfs_deactivate(). While KERNFS_ACTIVE_REF also behaves as an optimization to skip the deactivation step for non-file nodes, the benefit is marginal and it needlessly diverges code paths. Let's drop KERNFS_ACTIVE_REF and use KERNFS_LOCKDEP in kernfs_deactivate() too. While at it, add a test helper kernfs_lockdep() to test KERNFS_LOCKDEP flag so that it's more convenient and the related code can be compiled out when not enabled. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
kernfs_node->u.completion is used to notify deactivation completion from kernfs_put_active() to kernfs_deactivate(). We now allow multiple racing removals of the same node and the current removal scheme is no longer correct - kernfs_remove() invocation may return before the node is properly deactivated if it races against another removal. The removal path will be restructured to address the issue. To help such restructure which requires supporting multiple waiters, this patch replaces kernfs_node->u.completion with kernfs_root->deactivate_waitq. This makes deactivation event notifications share a per-root waitqueue_head; however, the wait path is quite cold and this will also allow shaving one pointer off kernfs_node. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tejun Heo 提交于
When kernfs_seq_start() fails to obtain an active reference, it returns ERR_PTR(-ENODEV). kernfs_seq_stop() is then invoked with the error pointer value; however, it still proceeds to invoke kernfs_put_active() on the node leading to unbalanced put. If kernfs_seq_stop() is called even after active ref failure, it should skip invocation of @ops->seq_stop() and put_active. Unfortunately, this is a bit complicated because active ref failure isn't the only thing which may fail with ERR_PTR(-ENODEV). @ops->seq_start/next() may also fail with the error value and kernfs_seq_stop() doesn't have a way to tell apart those failures. Work it around by factoring out the active part of kernfs_seq_stop() into kernfs_seq_stop_active() and invoking it directly if @ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating kernfs_seq_stop() to skip kernfs_seq_stop_active() on ERR_PTR(-ENODEV). This is a bit nasty but ensures that the active put is skipped iff get_active failed in kernfs_seq_start(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 1月, 2014 4 次提交
-
-
由 Ben Hutchings 提交于
We expect to read firmware blobs with a single call to kernel_read(), which returns int. Therefore the size must be within the range of int, not long. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bart Van Assche 提交于
Avoid that bus_unregister() triggers a use-after-free with CONFIG_DEBUG_KOBJECT_RELEASE=y. This patch avoids that the following sequence triggers a kernel crash with memory poisoning enabled: * bus_register() * driver_register() * driver_unregister() * bus_unregister() The above sequence causes the bus private data to be freed from inside the bus_unregister() call although it is not guaranteed in that function that the reference count on the bus private data has dropped to zero. As an example, with CONFIG_DEBUG_KOBJECT_RELEASE=y the ${bus}/drivers kobject is still holding a reference on bus->p->subsys.kobj via its parent pointer at the time the bus private data is freed. Fix this by deferring freeing the bus private data until the last kobject_put() call on bus->p->subsys.kobj. The kernel oops triggered by the above sequence and with memory poisoning enabled and that is fixed by this patch is as follows: general protection fault: 0000 [#1] PREEMPT SMP CPU: 3 PID: 2711 Comm: kworker/3:32 Tainted: G W O 3.13.0-rc4-debug+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events kobject_delayed_cleanup task: ffff880037f866d0 ti: ffff88003b638000 task.ti: ffff88003b638000 Call Trace: [<ffffffff81263105>] ? kobject_get_path+0x25/0x100 [<ffffffff81264354>] kobject_uevent_env+0x134/0x600 [<ffffffff8126482b>] kobject_uevent+0xb/0x10 [<ffffffff81262fa2>] kobject_delayed_cleanup+0xc2/0x1b0 [<ffffffff8106c047>] process_one_work+0x217/0x700 [<ffffffff8106bfdb>] ? process_one_work+0x1ab/0x700 [<ffffffff8106c64b>] worker_thread+0x11b/0x3a0 [<ffffffff8106c530>] ? process_one_work+0x700/0x700 [<ffffffff81074b70>] kthread+0xf0/0x110 [<ffffffff81074a80>] ? insert_kthread_work+0x80/0x80 [<ffffffff815673bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81074a80>] ? insert_kthread_work+0x80/0x80 Code: 89 f8 48 89 e5 f6 82 c0 27 63 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 27 63 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80 RIP [<ffffffff81267ed0>] strlen+0x0/0x30 RSP <ffff88003b639c70> ---[ end trace 210f883ef80376aa ]--- Signed-off-by: NBart Van Assche <bvanassche@acm.org> Acked-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bart Van Assche 提交于
Avoid that sparse reports the following warning on __fw_free_buf(): drivers/base/firmware_class.c:230:9: warning: context imbalance in '__fw_free_buf' - unexpected unlock Signed-off-by: NBart Van Assche <bvanassche@acm.org> Acked-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bart Van Assche 提交于
Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 1月, 2014 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit eee03164. Jeff writes: I have no objections to reverting it. There were concerns from Al Viro that it'd be tough to get right by callers and I had assumed it got dropped after that. I had planned on using it in my btrfs sysfs exports patchset but came up with a better way. Cc: Jeff Mahoney <jeffm@suse.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 12月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
We want these fixes here to handle some merge issues. Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 12月, 2013 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Much smaller batch of fixes this week. Biggest one is a revert of an OMAP display change that removed some non-DT pinmux code that was still needed for 3.13 to get DSI displays to work. There's also a fix that resolves some misdescribed GPIO controller resources on shmobile. The rest are mostly smaller fixes, a couple of MAINTAINERS updates, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: Revert "ARM: OMAP2+: Remove legacy mux code for display.c" MAINTAINERS: Add keystone clock drivers MAINTAINERS: Add keystone git tree information ARM: s3c64xx: dt: Fix boot failure due to double clock initialization ARM: shmobile: r8a7790: Fix GPIO resources in DTS irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull firewire fixlet from Stefan Richter: "A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12. Buggy targets which could malfunction when being subjected to this command are already sufficiently protected by a scsi_level check in sd + SCSI core" * tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: bring back WRITE SAME support
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor items this time around, the most notable being a FILEIO backend change to enforce hw_max_sectors based upon the current block_size to address a bug where large sized I/Os (> 1M) where being rejected" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure target: Remove extra percpu_ref_init target/file: Update hw_max_sectors based on current block_size iser-target: Move INIT_WORK setup into isert_create_device_ib_res iscsi-target: Fix incorrect np->np_thread NULL assignment qla2xxx: Fix schedule_delayed_work() for target timeout calculations iser-target: fix error return code in isert_create_device_ib_res() iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set target: Remove write-only stats fields and lock from struct se_node_acl iscsi-target: return -EINVAL on oversized configfs parameter
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull AIO leak fixes from Ben LaHaise: "I've put these two patches plus Linus's change through a round of tests, and it passes millions of iterations of the aio numa migratepage test, as well as a number of repetitions of a few simple read and write tests. The first patch fixes the memory leak Kent introduced, while the second patch makes aio_migratepage() much more paranoid and robust" * git://git.kvack.org/~bcrl/aio-next: aio/migratepages: make aio migrate pages sane aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
-
由 Linus Torvalds 提交于
Since commit 36bc08cc ("fs/aio: Add support to aio ring pages migration") the aio ring setup code has used a special per-ring backing inode for the page allocations, rather than just using random anonymous pages. However, rather than remembering the pages as it allocated them, it would allocate the pages, insert them into the file mapping (dirty, so that they couldn't be free'd), and then forget about them. And then to look them up again, it would mmap the mapping, and then use "get_user_pages()" to get back an array of the pages we just created. Now, not only is that incredibly inefficient, it also leaked all the pages if the mmap failed (which could happen due to excessive number of mappings, for example). So clean it all up, making it much more straightforward. Also remove some left-overs of the previous (broken) mm_populate() usage that was removed in commit d6c355c7 ("aio: fix race in ring buffer page lookup introduced by page migration support") but left the pointless and now misleading MAP_POPULATE flag around. Tested-and-acked-by: NBenjamin LaHaise <bcrl@kvack.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 12月, 2013 2 次提交
-
-
由 Benjamin LaHaise 提交于
The arbitrary restriction on page counts offered by the core migrate_page_move_mapping() code results in rather suspicious looking fiddling with page reference counts in the aio_migratepage() operation. To fix this, make migrate_page_move_mapping() take an extra_count parameter that allows aio to tell the code about its own reference count on the page being migrated. While cleaning up aio_migratepage(), make it validate that the old page being passed in is actually what aio_migratepage() expects to prevent misbehaviour in the case of races. Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
-
由 Benjamin LaHaise 提交于
e34ecee2 reworked the percpu reference counting to correct a bug trinity found. Unfortunately, the change lead to kioctxes being leaked because there was no final reference count to put. Add that reference count back in to fix things. Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org
-
- 21 12月, 2013 8 次提交
-
-
由 Linus Torvalds 提交于
Commit 1bf49dd4 ("./Makefile: export initial ramdisk compression config option") started setting the INITRD_COMPRESS environment variable depending on which decompression models the kernel had available. That is completely broken. For example, we by default have CONFIG_RD_LZ4 enabled, and are able to decompress such an initrd, but the user tools to *create* such an initrd may not be availble. So trying to tell dracut to generate an lz4-compressed image just because we can decode such an image is completely inappropriate. Cc: J P <ppandit@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs bugfixes from Ben Myers: "This contains fixes for some asserts related to project quotas, a memory leak, a hang when disabling group or project quotas before disabling user quotas, Dave's email address, several fixes for the alignment of file allocation to stripe unit/width geometry, a fix for an assertion with xfs_zero_remaining_bytes, and the behavior of metadata writeback in the face of IO errors. Details: - fix memory leak in xfs_dir2_node_removename - fix quota assertion in xfs_setattr_size - fix quota assertions in xfs_qm_vop_create_dqattach - fix for hang when disabling group and project quotas before disabling user quotas - fix Dave Chinner's email address in MAINTAINERS - fix for file allocation alignment - fix for assertion in xfs_buf_stale by removing xfsbdstrat - fix for alignment with swalloc mount option - fix for "retry forever" semantics on IO errors" * tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs: xfs: abort metadata writeback on permanent errors xfs: swalloc doesn't align allocations properly xfs: remove xfsbdstrat error xfs: align initial file allocations correctly MAINTAINERS: fix incorrect mail address of XFS maintainer xfs: fix infinite loop by detaching the group/project hints from user dquot xfs: fix assertion failure at xfs_setattr_nonsize xfs: fix false assertion at xfs_qm_vop_create_dqattach xfs: fix memory leak in xfs_dir2_node_removename
-
由 Olof Johansson 提交于
Commit 597d795a ('mm: do not allocate page->ptl dynamically, if spinlock_t fits to long') restructures some allocators that are compiled even if USE_SPLIT_PTLOCKS arn't used. It results in compilation failure: mm/memory.c:4282:6: error: 'struct page' has no member named 'ptl' mm/memory.c:4288:12: error: 'struct page' has no member named 'ptl' Add in the missing ifdef. Fixes: 597d795a ('mm: do not allocate page->ptl dynamically, if spinlock_t fits to long') Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fix from Vineet Gupta: "Fix busted syscall table due to unistd header inclusion issue" * tag 'arc-fixes-for-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 ptrace fix from Catalin Marinas. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events
-
由 Luck, Tony 提交于
Some pstore backing devices use on board flash as persistent storage. These have limited numbers of write cycles so it is a poor idea to use them from high frequency operations. Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'dmaengine-fixes-3.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine fixes from Dan Williams: - deprecation of net_dma to be removed in 3.14 - crash regression fix in pl330 from the dmaengine_unmap rework - crash regression fix for any channel running raid ops without CONFIG_ASYNC_TX_DMA from dmaengine_unmap - memory leak regression in mv_xor from dmaengine_unmap - build warning regressions in mv_xor, fsldma, ppc4xx, txx9, and at_hdmac from dmaengine_unmap - sleep in atomic regression in dma_async_memcpy_pg_to_pg - new fix in mv_xor for handling channel initialization failures * tag 'dmaengine-fixes-3.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net_dma: mark broken dma: pl330: ensure DMA descriptors are zero-initialised dmaengine: fix sleep in atomic dmaengine: mv_xor: fix oops when channels fail to initialise dma: mv_xor: Use dmaengine_unmap_data for the self-tests dmaengine: fix enable for high order unmap pools dma: fix build warnings in txx9 dmatest: fix build warning on mips dma: fix fsldma build warnings dma: fix build warnings in ppc4xx dmaengine: at_hdmac: remove unused function dma: mv_xor: remove mv_desc_get_dest_addr()
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "The PPC folks had a large amount of changes queued for 3.13, and now they are fixing the bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Don't drop low-order page address bits powerpc: book3s: kvm: Don't abuse host r2 in exit path powerpc/kvm/booke: Fix build break due to stack frame size warning KVM: PPC: Book3S: PR: Enable interrupts earlier KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu KVM: PPC: Book3S: PR: Don't clobber our exit handler id powerpc: kvm: fix rare but potential deadlock scene KVM: PPC: Book3S HV: Take SRCU read lock around kvm_read_guest() call KVM: PPC: Book3S HV: Make tbacct_lock irq-safe KVM: PPC: Book3S HV: Refine barriers in guest entry/exit KVM: PPC: Book3S HV: Fix physical address calculations
-