提交 93579aee 编写于 作者: L Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Much smaller batch of fixes this week.

  Biggest one is a revert of an OMAP display change that removed some
  non-DT pinmux code that was still needed for 3.13 to get DSI displays
  to work.

  There's also a fix that resolves some misdescribed GPIO controller
  resources on shmobile.  The rest are mostly smaller fixes, a couple of
  MAINTAINERS updates, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
  MAINTAINERS: Add keystone clock drivers
  MAINTAINERS: Add keystone git tree information
  ARM: s3c64xx: dt: Fix boot failure due to double clock initialization
  ARM: shmobile: r8a7790: Fix GPIO resources in DTS
  irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
  ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
上级 ba8b844f 95fcfa70
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -1008,6 +1008,8 @@ M: Santosh Shilimkar <santosh.shilimkar@ti.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
F: drivers/clk/keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
......
......@@ -87,9 +87,9 @@
interrupts = <1 9 0xf04>;
};
gpio0: gpio@ffc40000 {
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc40000 0 0x2c>;
reg = <0 0xe6050000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 4 0x4>;
#gpio-cells = <2>;
......@@ -99,9 +99,9 @@
interrupt-controller;
};
gpio1: gpio@ffc41000 {
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc41000 0 0x2c>;
reg = <0 0xe6051000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 5 0x4>;
#gpio-cells = <2>;
......@@ -111,9 +111,9 @@
interrupt-controller;
};
gpio2: gpio@ffc42000 {
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc42000 0 0x2c>;
reg = <0 0xe6052000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 6 0x4>;
#gpio-cells = <2>;
......@@ -123,9 +123,9 @@
interrupt-controller;
};
gpio3: gpio@ffc43000 {
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc43000 0 0x2c>;
reg = <0 0xe6053000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 7 0x4>;
#gpio-cells = <2>;
......@@ -135,9 +135,9 @@
interrupt-controller;
};
gpio4: gpio@ffc44000 {
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc44000 0 0x2c>;
reg = <0 0xe6054000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 8 0x4>;
#gpio-cells = <2>;
......@@ -147,9 +147,9 @@
interrupt-controller;
};
gpio5: gpio@ffc45000 {
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc45000 0 0x2c>;
reg = <0 0xe6055000 0 0x50>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4>;
#gpio-cells = <2>;
......
......@@ -101,13 +101,51 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
u32 reg;
if (dsi_id == 0) {
enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
pipd_mask = OMAP4_DSI1_PIPD_MASK;
pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
} else if (dsi_id == 1) {
enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
pipd_mask = OMAP4_DSI2_PIPD_MASK;
pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
} else {
return -ENODEV;
}
reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
reg &= ~enable_mask;
reg &= ~pipd_mask;
reg |= (lanes << enable_shift) & enable_mask;
reg |= (lanes << pipd_shift) & pipd_mask;
omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
return 0;
}
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
return omap4_dsi_mux_pads(dsi_id, lane_mask);
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
omap4_dsi_mux_pads(dsi_id, 0);
}
static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)
......
......@@ -8,8 +8,6 @@
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
......@@ -48,15 +46,9 @@ static void __init s3c64xx_dt_map_io(void)
panic("SoC is not S3C64xx!");
}
static void __init s3c64xx_dt_init_irq(void)
{
of_clk_init(NULL);
samsung_wdt_reset_of_init();
irqchip_init();
};
static void __init s3c64xx_dt_init_machine(void)
{
samsung_wdt_reset_of_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
......@@ -79,7 +71,6 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
/* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
.dt_compat = s3c64xx_dt_compat,
.map_io = s3c64xx_dt_map_io,
.init_irq = s3c64xx_dt_init_irq,
.init_machine = s3c64xx_dt_init_machine,
.restart = s3c64xx_dt_restart,
MACHINE_END
......@@ -245,7 +245,9 @@ static void __init lager_init(void)
{
lager_add_standard_devices();
phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7790-ether-ff:01",
lager_ksz8041_fixup);
}
static const char * const lager_boards_compat_dt[] __initconst = {
......
......@@ -149,8 +149,9 @@ static void intc_irqpin_read_modify_write(struct intc_irqpin_priv *p,
static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p,
int irq, int do_mask)
{
int bitfield_width = 4; /* PRIO assumed to have fixed bitfield width */
int shift = (7 - irq) * bitfield_width; /* PRIO assumed to be 32-bit */
/* The PRIO register is assumed to be 32-bit with fixed 4-bit fields. */
int bitfield_width = 4;
int shift = 32 - (irq + 1) * bitfield_width;
intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_PRIO,
shift, bitfield_width,
......@@ -159,8 +160,9 @@ static void intc_irqpin_mask_unmask_prio(struct intc_irqpin_priv *p,
static int intc_irqpin_set_sense(struct intc_irqpin_priv *p, int irq, int value)
{
/* The SENSE register is assumed to be 32-bit. */
int bitfield_width = p->config.sense_bitfield_width;
int shift = (7 - irq) * bitfield_width; /* SENSE assumed to be 32-bit */
int shift = 32 - (irq + 1) * bitfield_width;
dev_dbg(&p->pdev->dev, "sense irq = %d, mode = %d\n", irq, value);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部