By taking the ui__lock so that no other screen updates take place while
waiting for the user.

That was happening when handling an invalid --vmlinux parameter in 'perf
top --tui', with the screen refresh routine repainting the screen and
removing the warning window.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing a SEGV. An empty list could happen when not being able to resolve
symbols, for instance when --vmlinux invalid-file is used.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Needed because we were only showing the title in ui_browser__show,
not in ui_browser__run, and in the run loop we may be calling other
browsers that would then change the title, when we go back to the
previous browser, we need to redraw the title.

We could have done this as the Newt help line, with pop, etc, but I
don't think its worth, doing it explicitely, when needed (some browsers
may not use the title area at all) seems enough/more flexible.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The left key was exiting 'perf top --tui' when it really shouldn't, it
was too easy to leave the live annotation window and then press one too
many <- and get out of the tool altogether.

Do just like the report TUI does, ignore the left key for exit and also
ask the user when pressing ESC if that is really what is wanted.
Reported-by: NMike Galbraith <efault@gmx.de>
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In both --tui and --stdio, in 'annotate', 'top', 'report' when trying to
annotate a kernel symbol having just access to a kallsyms file, that
doesn't have the DWARF info needed for annotation.
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

There is no point in us having different code paths for nmi and !nmi
here, so remove the !nmi one.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patches ensures that we do not end up calling
perf_cgroup_from_task() when there is no cgroup event.
This avoids potential RCU and locking issues.

The change in perf_cgroup_set_timestamp() ensures we
check against ctx->nr_cgroups. It also avoids calling
perf_clock() tiwce in a row. It also ensures we do need
to grab ctx->lock before calling the function.

We drop update_cgrp_time() from task_clock_event_read()
because it is not needed. This also avoids having to
deal with perf_cgroup_from_task().

Thanks to Peter Zijlstra for his help on this.
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d5e76b8.815bdf0a.7ac3.774f@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110222205312.GA18474@joi.lan>
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This is not a problem when we're not at the bottom of the active symbols
list, so was not noticed, but at the end of the screen it falls apart.

Fix it by adjusting the ui_browser indexes according to the new number
of entries in the rb_tree and by seeking from the start of the rb_tree
to find the new symbol at the top of the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now one has just to press the right key, 'a' or Enter on the main 'perf
top --tui' screen to live annotate the symbol under the cursor.

The annotate window starts centered on the hottest line (the one with
most samples so far) then TAB and shift+TAB can be used to go to the
prev/next hot line.

Pressing 'H' at any point will center again the screen on the hottest
line.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While fixing an error propagating problem in f809b25 I added two
redundant checks.

I did that because I didn't expect the checks to be on the while and for
loop condition expression, where they are tested before we run the loop,
where the 'ret' variable is set.

So remove it from there and leave it just after it is actually set,
eliminating unneded tests.
Reported-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The kernel refuses mmapping an event with the inherit flag set for
something that is systemwide (cpu == -1), and the evsel layer got this
reversed at some point, fix it.

The symtom was that the --pid and --tid parameters for 'perf record' and
'perf top' returned with -EINVAL, like:

 # /tmp/build-perf/perf record -v -fo/tmp/perf.data -p 1042
   Warning:  ... trying to fall back to cpu-clock-ticks

   Fatal: failed to mmap with 22 (Invalid argument)
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There are two hunks in this patch that stops probe processing as soon as one
error is found, breaking out of loops, the other fix an error propagation that
should return a negative error number but instead was returning the result of
"ret < 0", which is 1 and thus made several error checks fail because they test
agains < 0.

The problem could be triggered by asking for a variable that was optimized out,
fact that should stop the whole probe processing but instead was segfaulting
while installing broken probes:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
Add new events:
  probe:perf_mmap      (on perf_mmap:55 with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55 with user_lock_limit)
Segmentation fault (core dumped)
[root@emilia ~]# perf probe -l
  probe:perf_mmap      (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
[root@emilia ~]#

After the fix:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
  Error: Failed to add events. (-2)
[root@emilia ~]#

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 unnecessary uname calls
 `sh -c'
 BUILT_INS and QUIET_BUILT_IN

    They have no effect, and the `fixup-builtins' and `check-builtins.sh'
    scripts don't even exist.

 RUNTIME_PREFIX

    It's currently never anything but unset, and it's apparently
    only meaningful when Microsoft Windows is the operating system
    (according to the source for git).

 TEST_PROGRAMS
 EXTRA_PROGRAMS
 unused SHELL_PATH_SQ portions
 unused test for V=2
 useless exports

    Only when `V' is undefined (that is, only when the value of `V'
    is empty) is `export V' performed, which just has the effect of
    placing the empty-valued variable `V' in the environment.

    The only other script to make use of `V' is `Documentation/Makefile',
    which only checks whether `V' is undefined (that is, whether the value
    of `V' is empty); hence, the `export V' has no effect whatsoever.

    Similarly, `export QUIET_GEN' is useless because it will only have
    a non-empty value when `V' has an empty-value, and when `V' has
    an empty-value, `QUIET_GEN' is always explicitly set in every
    script in which it is used.

    `DESTDIR' is only ever defined by the user via the environment
    or the command line, both of which are automatically exported
    to sub-make processes. Furthermore, no non-make sub-scripts
    make use of `DESTDIR' as an environment variable.

    No other scripts use `perfexec_instdir'.

 unused QUIET_SUBDIR{0,1}
 TAR and RPMBUILD
 PTHREAD_LIBS
 Maintainer's dist rules and commands
 distclean target
 Test suite coverage testing
 PRINT_DIR and NO_SUBDIR
 `configure' target
 NO_CURL
 @@PERF_VERSION@@ substitution

    Without the sed command, all of the rule's commands can be reduced
    to a single line that copies a file and sets the permissions properly
    in the process.

 `make test' echo line
 template_instdir
 PERF-BUILD-OPTIONS
 double-colon rules

    The use of double-colon rules seems misguided or vestigial git.

 Essentially hard-coded $(SCRIPTS) expansion
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 NO_C99_FORMAT
 CURLDIR and EXPATDIR
 NO_DEFLATE_BOUND
 CC_LD_DYNPATH and NO_R_TO_GCC_LINKER
 NO_PERL_MAKEMAKER
 INTERNAL_QSORT
 NO_EXTERNAL_GREP
 NO_PERL
 SCRIPT_PERL
 PERL_PATH_SQ
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While it makes sense that this tool could be used on
other platforms at least to parse data, there doesn't
appear to be any real support for such usage.

This commit squashes several commits that remove:

 SNPRINTF_RETURNS_BOGUS
 FREAD_READS_DIRECTORIES
 NO_D_{INO,TYPE}_IN_DIRENT
 NO_STRCASESTR
 NO_MEMMEM
 NO_STRTOUMAX and NO_STRTOULL
 NO_SETENV
 NO_UNSETENV
 NO_MKDTEMP
 NEEDS_LIBICONV
 NEEDS_SOCKET
 NO_MMAP
 NO_PTHREADS
 NO_PREAD
 NO_TRUSTABLE_FILEMODE
 NO_IPV6 and NO_SOCKADDR_STORAGE
 NO_ICONV and OLD_ICONV
 NO_NSEC, USE_NSEC, and USE_ST_TIMESPEC
 NO_ST_BLOCKS_IN_STRUCT_STAT
 NO_FINK and NO_DARWIN_PORTS
 NO_SYS_SELECT_H
 NO_HSTRERROR
 DIR_HAS_BSD_GROUP_SEMANTICS and FORCE_DIR_SET_GID
 NEEDS_NSL, NO_UINTMAX_T, NO_INET_{N,P}TON
 COMPAT_{CFLAGS,OBJS}
 Executable extension `X'
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 NO_SYMLINK_HEAD
 NO_SVN_TESTS
 NO_FAST_WORKING_DIRECTORY
 USE_STDEV
 SHA1/SSL cruft
 makefile rules
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With no caller left, the function and the DIE_NMIWATCHDOG
enumerator can both go away.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <4D5D521C0200007800032702@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

This reverts commit 5e38ca8f.

Breaks the build of several !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
architectures.

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Message-ID: <20110217171823.GB17058@elte.hu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The man page has the details, here are some examples:

[root@emilia ~]# perf list *fault*  *:*wait*

List of pre-defined events (to be used in -e):
  page-faults OR faults                      [Software event]
  minor-faults                               [Software event]
  major-faults                               [Software event]
  alignment-faults                           [Software event]
  emulation-faults                           [Software event]

  radeon:radeon_fence_wait_begin             [Tracepoint event]
  radeon:radeon_fence_wait_end               [Tracepoint event]
  writeback:wbc_writeback_wait               [Tracepoint event]
  writeback:wbc_balance_dirty_wait           [Tracepoint event]
  writeback:writeback_congestion_wait        [Tracepoint event]
  writeback:writeback_wait_iff_congested     [Tracepoint event]
  sched:sched_wait_task                      [Tracepoint event]
  sched:sched_process_wait                   [Tracepoint event]
  sched:sched_stat_wait                      [Tracepoint event]
  sched:sched_stat_iowait                    [Tracepoint event]
  syscalls:sys_enter_epoll_wait              [Tracepoint event]
  syscalls:sys_exit_epoll_wait               [Tracepoint event]
  syscalls:sys_enter_epoll_pwait             [Tracepoint event]
  syscalls:sys_exit_epoll_pwait              [Tracepoint event]
  syscalls:sys_enter_rt_sigtimedwait         [Tracepoint event]
  syscalls:sys_exit_rt_sigtimedwait          [Tracepoint event]
  syscalls:sys_enter_waitid                  [Tracepoint event]
  syscalls:sys_exit_waitid                   [Tracepoint event]
  syscalls:sys_enter_wait4                   [Tracepoint event]
  syscalls:sys_exit_wait4                    [Tracepoint event]
  syscalls:sys_enter_waitpid                 [Tracepoint event]
  syscalls:sys_exit_waitpid                  [Tracepoint event]
[root@emilia ~]#
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

[root@emilia ~]# perf report --stdio
The perf.data file has no samples!
[root@emilia ~]#

The TUI shows a popup warning message with the same message.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While testing the --filter option I noticed that we were writing lots of
unneeded stuff to the perf.data header when the filter ioctl fails, so
move the atexit(atexit_header) call to after we create the counters
successfully.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#
Reported-by: NStephane Eranian <eranian@google.com>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core

This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).

This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.

This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.

$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011

 Performance counter stats for 'date':

            568600 cycles:u
           2779715 cycles:k

        0.001908182  seconds time elapsed

Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d9 "Add cgroup support" ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 023695d9 cset added a new file, util/cgroup.c, that is referenced from
util/evsel.c, so it needs to be present in util/setup.py so that the python
shared object binding works, fixing this:

[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/python/
[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
  File "./tools/perf/python/twatch.py", line 16, in <module>
    import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: close_cgroup

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show filename which contains a target function with the function name on
"--lines" mode, because perf-probe just shows the first function even if
there are many same-name functions.

Originally adopted by Franck Bui-Huu's patch which shows file name
instead of function name. I've just modified it to show both of function
name and file name, because of completeness of output.

 E.g.)
 $ perf probe -L t_show
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/ftrace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
      2         struct ftrace_iterator *iter = m->private;
 ...

 $ perf probe -L t_show@trace/trace.c
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/trace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
                struct tracer *t = v;
 ...
Original-patch-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110210090816.1809.43426.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since "perf probe --add" supports function@filename syntax, --line
option should also support it.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <20110210090810.1809.26913.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf makefile is nicely complete except for

a) an uninstall option
b) a 'make help' description

This patch implements b)
it also comments out other non-working makefile targets
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not just for the percentage number, to see the hot lines more easily.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just like done on symbol__inc_addr_samples to catch misparsed offsets
from objdump.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The ui operations so far were used by just one thread, but 'perf top
--tui' now has two threads updating the screen, so we need to use a
mutex to avoid garbling the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There is no need to re-initialize the hrtimer every time we start it,
so don't do that (shaves a few cycles). Also, since we know hrtimers
run at a fixed rate (nanoseconds) we can pre-compute the desired
frequency at which they tick. This avoids us having to go through the
whole adaptive frequency feedback logic (shaves another few cycles).
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1297448589.5226.47.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By pre-computing the maximum number of samples per tick we can avoid a
multiplication and a conditional since MAX_INTERRUPTS >
max_samples_per_tick.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds support for AMD family 15h core counters. There are
major changes compared to family 10h. First, there is a new perfctr
msr range for up to 6 counters. Northbridge counters are separate
now. This patch only adds support for core counters. Second, certain
events may only be scheduled on certain counters. For this we need to
extend the event scheduling and constraints.

We use cpu feature flags to calculate family 15h msr address offsets.
This way we later can implement a faster ALTERNATIVE() version for
this.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110215135210.GB5874@erda.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of storing the base addresses we can store the counter's msr
addresses directly in config_base/event_base of struct hw_perf_event.
This avoids recalculating the address with each msr access. The
addresses are configured one time. We also need this change to later
modify the address calculation.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch allows the reservation of perfctrs with new msr addresses
introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc).
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>