commit 1db4909e76f64a85f4aaa187f0f683f5c85a471d upstream.

Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.

This patch fixes the issue by the following approach:

1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs

2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj

3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.

This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit e01ad46d53b59720c6ae69963ee1756506954c85 upstream.

When we try to increate the nr_hw_queues, we may fail due to
shortage of memory or other reason, then blk_mq_realloc_hw_ctxs stops
and some entries in q->queue_hw_ctx are left with NULL. However,
because queue map has been updated with new nr_hw_queues, some cpus
have been mapped to hw queue which just encounters allocation failure,
thus blk_mq_map_queue could return NULL. This will cause panic in
following blk_mq_map_swqueue.

To fix it, when increase nr_hw_queues fails, fallback to previous
nr_hw_queues and post warning. At the same time, driver's .map_queues
usually use completion irq affinity to map hw and cpu, fallback
nr_hw_queues will cause lack of some cpu's map to hw, so use default
blk_mq_map_queues to do that.

Reported-by: syzbot+83e8cbe702263932d9d4@syzkaller.appspotmail.com
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 34d11ffac1f56c3895dad32153abd6814452dc77 upstream.

When the hw queues and mq_map are updated, a hctx could be mapped
to a different numa node. At this moment, we need to realloc the
hctx. If fail to do that, go on using previous hctx.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 477e19dedc9d3e1f4443a1d4ae00572a988120ea upstream.

blk-mq debugfs and sysfs entries need to be removed before updating
queue map, otherwise, we get get wrong result there. This patch fixes
it and remove the redundant debugfs and sysfs register/unregister
operations during __blk_mq_update_nr_hw_queues.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

If one process context is stucked in wait_on_buffer(), lock_buffer(),
lock_page() and wait_on_page_writeback() and wait_on_bit_io(), it's
hard to tell ture reason, for example, whether this page is under io,
or this page is just locked too long by other process context.

Normally io request has multiple bios, and every bio contains multiple
pages which will hold data to be read from or written to device, so here
we record page info or bio info in task_struct while process calls
lock_page(), lock_buffer(), wait_on_page_writeback(), wait_on_buffer()
and wait_on_bit_io(), we add a new proce interface:
[lege@localhost linux]$ cat /proc/4516/wait_res
1 ffffd0969f95d3c0 4295369599 4295381596

Above info means that thread 4516 is waitting on a page, address is
ffffd0969f95d3c0, and has waited for 11997ms.

First field denotes the page address process is waitting on.
Second field denotes the wait moment and the third denotes current moment.

In practice, if we found a process waitting on one page for too long time,
we can get page's address by reading /proc/$pid/wait_page, and search this
page address in all block devices' /sys/kernel/debug/block/${devname}/rq_hang,
if search operation hits one, we can get the request and know why this io
request hangs that long.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

Background:
  We do not have a dependable block layer interface to determine whether
block device has io requests which have not been completed for somewhat
long time. Currently we have 'in_flight' interface, it counts the number
of I/O requests that have been issued to the device driver but have
not yet completed, and it does not include I/O requests that are in the
queue but not yet issued to the device driver, which means it will not
count io requests that have been stucked in block layer.
  Also say that there are steady io requests issued to device driver,
'in_flight' maybe always non-zero, but you could not determine whether
there is one io request which has not been completed for too long.

Solution:
  To find io requests which have not been completed for too long, here
add 3 new inferfaces:
  /sys/block/vdb/queue/hang_threshold
If one io request's running time has been greater than this value, count
this io as hang.

  /sys/block/vdb/hang
Show read/write io requests' hang counter.

  /sys/kernel/debug/block/vdb/rq_hang
Show all hang io requests's detailed info, like below:
  ffff97db96301200 {.op=WRITE, .cmd_flags=SYNC, .rq_flags=STARTED|
ELVPRIV|IO_STAT|STATS, .state=in_flight, .tag=30, .internal_tag=169,
.start_time_ns=140634088407, .io_start_time_ns=140634102958,
.current_time=146497371953, .bio = ffff97db91e8e000,
.bio_pages = { ffffd096a0602540 }, .bio = ffff97db91e8ec00,
.bio_pages = { ffffd096a070eec0 }, .bio = ffff97db91e8f600,
.bio_pages = { ffffd096a0424cc0 }, .bio = ffff97db91e8f300,
.bio_pages = { ffffd096a0600a80 }}

With above info, we can easily see this request's latency distribution,
and see next patch for bio_pages's usage.

Note, /sys/kernel/debug/block/vdb/rq_hang only exists in blk-mq device driver
and needs CONFIG_BLK_DEBUG_FS enabled.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 4800bf7bc8c725e955fcbc6191cc872f43f506d3 upstream.

A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
fall into an endless loop in the discard code. The test is creating
a device that is exactly 2^32 sectors in size to test mkfs boundary
conditions around the 32 bit sector overflow region.

mkfs issues a discard for the entire device size by default, and
hence this throws a sector count of 2^32 into
blkdev_issue_discard(). It takes the number of sectors to discard as
a sector_t - a 64 bit value.

The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard")
takes this sector count and casts it to a 32 bit value before
comapring it against the maximum allowed discard size the device
has. This truncates away the upper 32 bits, and so if the lower 32
bits of the sector count is zero, it starts issuing discards of
length 0. This causes the code to fall into an endless loop, issuing
a zero length discards over and over again on the same sector.

Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard")
Tested-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>

Killed pointless WARN_ON().
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit ba5d73851e71847ba7f7f4c27a1a6e1f5ab91c79 upstream.

Cleanup __blkdev_issue_discard() a bit:

- remove local variable of 'end_sect'
- remove code block of 'fail'

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Tested-by: NRui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

commit 399254aaf4892113c806816f7e64cf40c804d46d upstream.

If bio_iov_iter_get_pages() is called on an iov_iter that is flagged
with NO_REF, then we don't need to add a page reference for the pages
that we add.

Add BIO_NO_PAGE_REF to track this in the bio, so IO completion knows
not to drop a reference to these pages.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 6d0c48aede85e38316d0251564cab39cbc2422f6 upstream.

For an ITER_BVEC, we can just iterate the iov and add the pages
to the bio directly. For now, we grab a reference to those pages,
and release them normally on IO completion. This isn't really needed
for the normal case of O_DIRECT from/to a file, but some of the more
esoteric use cases (like splice(2)) will unconditionally put the
pipe buffer pages when the buffers are released. Until we can manage
that case properly, ITER_BVEC pages are treated like normal pages
in terms of reference counting.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d04c406f29d9f4dbcb5eb5aa79ce0445c7e9d652 upstream.

This prevents a HIPRI bio from being submitted through a stacking
driver that does not support polling and thus won't poll for I/O
completion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 529262d56dbebe6a26df5d2fd24cc0e1bc8579e5 upstream.

This was intended to support users like nvme multipath, but is just
getting in the way and adding another indirect call.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 0a1b8b87d064a47fad9ec475316002da28559207 upstream.

blk_poll() has always kept spinning until it found an IO. This is
fine for SYNC polling, since we need to find one request we have
pending, but in preparation for ASYNC polling it can be beneficial
to just check if we have any entries available or not.

Existing callers are converted to pass in 'spin == true', to retain
the old behavior.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 1052b8ac5282daf35df331edcbdb645839d17e6a upstream.

If we want to support async IO polling, then we have to allow finding
completions that aren't just for the one we are looking for. Always pass
in -1 to the mq_ops->poll() helper, and have that return how many events
were found in this poll loop.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 64845a1ddd655574886eb48e9a5eaeeb9b05bf0d upstream.

Define get_current_ioprio() as an inline helper to obtain the caller
I/O priority from its task I/O context. Use this helper in
blk_init_request_from_bio() to set a request ioprio.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 85f4d4b65fdd67f1d6dc9eeb1d91923cef07eb6a upstream.

We currently only really support sync poll, ie poll with 1 IO in flight.
This prepares us for supporting async poll.

Note that the returned value isn't necessarily 100% accurate. If poll
races with IRQ completion, we assume that the fact that the task is now
runnable means we found at least one entry. In reality it could be more
than 1, or not even 1. This is fine, the caller will just need to take
this into account.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 00e23707442a75b404392cef1405ab4fd498de6b upstream.

Use accessor functions to access an iterator's type and direction.  This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

This fixes the following format build warning:
  block/blk-iocost.c: In function 'ioc_stat_prfill':
  block/blk-iocost.c:2506:17: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 9 has type 'long int' [-Wformat=]
Reported-by: Nkbuild test robot <lkp@intel.com>
Fixes: 0670363c ("alinux: iocost: add ioc_gq stat")
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Add a stat file to monitor the ioc_gq stat.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Currently in blk_throtl_bio(), if one bio exceeds its throtl_grp's bps
or iops limit, this bio will be queued throtl_grp's throtl_service_queue,
then obviously mm subsys will submit more pages, even underlying device
can not handle these io requests, also this will make large amount of pages
entering writeback prematurely, later if some process writes some of these
pages, it will wait for long time.

I have done some tests: one process does buffered writes on a 1GB file,
and make this process's blkcg max bps limit be 10MB/s, I observe this:
	#cat /proc/meminfo  | grep -i back
	Writeback:        900024 kB
	WritebackTmp:          0 kB

I think this Writeback value is just too big, indeed many bios have been
queued in throtl_grp's throtl_service_queue, if one process try to write
the last bio's page in this queue, it will call wait_on_page_writeback(page),
which must wait the previous bios to finish and will take long time, we
have also see 120s hung task warning in our server.

 INFO: task kworker/u128:0:30072 blocked for more than 120 seconds.
       Tainted: G            E 4.9.147-013.ali3000_015_test.alios7.x86_64 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 kworker/u128:0  D    0 30072      2 0x00000000
 Workqueue: writeback wb_workfn (flush-8:16)
  ffff882ddd066b40 0000000000000000 ffff882e5cad3400 ffff882fbe959e80
  ffff882fa50b1a00 ffffc9003a5a3768 ffffffff8173325d ffffc9003a5a3780
  00ff882e5cad3400 ffff882fbe959e80 ffffffff81360b49 ffff882e5cad3400
 Call Trace:
  [<ffffffff8173325d>] ? __schedule+0x23d/0x6d0
  [<ffffffff81360b49>] ? alloc_request_struct+0x19/0x20
  [<ffffffff81733726>] schedule+0x36/0x80
  [<ffffffff81736c56>] schedule_timeout+0x206/0x4b0
  [<ffffffff81036c69>] ? sched_clock+0x9/0x10
  [<ffffffff81363073>] ? get_request+0x403/0x810
  [<ffffffff8110ca10>] ? ktime_get+0x40/0xb0
  [<ffffffff81732f8a>] io_schedule_timeout+0xda/0x170
  [<ffffffff81733f90>] ? bit_wait+0x60/0x60
  [<ffffffff81733fab>] bit_wait_io+0x1b/0x60
  [<ffffffff81733b28>] __wait_on_bit+0x58/0x90
  [<ffffffff811b0d91>] ? find_get_pages_tag+0x161/0x2e0
  [<ffffffff811aff62>] wait_on_page_bit+0x82/0xa0
  [<ffffffff810d47f0>] ? wake_atomic_t_function+0x60/0x60
  [<ffffffffa02fc181>] mpage_prepare_extent_to_map+0x2d1/0x310 [ext4]
  [<ffffffff8121ff65>] ? kmem_cache_alloc+0x185/0x1a0
  [<ffffffffa0305a2f>] ? ext4_init_io_end+0x1f/0x40 [ext4]
  [<ffffffffa0300294>] ext4_writepages+0x404/0xef0 [ext4]
  [<ffffffff81508c64>] ? scsi_init_io+0x44/0x200
  [<ffffffff81398a0f>] ? fprop_fraction_percpu+0x2f/0x80
  [<ffffffff811c139e>] do_writepages+0x1e/0x30
  [<ffffffff8127c0f5>] __writeback_single_inode+0x45/0x320
  [<ffffffff8127c942>] writeback_sb_inodes+0x272/0x600
  [<ffffffff8127cf6b>] wb_writeback+0x10b/0x300
  [<ffffffff8127d884>] wb_workfn+0xb4/0x380
  [<ffffffff810b85e9>] ? try_to_wake_up+0x59/0x3e0
  [<ffffffff810a5759>] process_one_work+0x189/0x420
  [<ffffffff810a5a3e>] worker_thread+0x4e/0x4b0
  [<ffffffff810a59f0>] ? process_one_work+0x420/0x420
  [<ffffffff810ac026>] kthread+0xe6/0x100
  [<ffffffff810abf40>] ? kthread_park+0x60/0x60
  [<ffffffff81738499>] ret_from_fork+0x39/0x50

To fix this issue, we can simply limit throtl_service_queue's max queued
bios, currently we limit it to throtl_grp's bps_limit or iops limit, if it
still exteeds, we just sleep for a while.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Now we have counters for wait_time and service_time, but no completed
ios, so the average latency can not be measured.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

This patch does the code cleanup because the seq_show handlers for tg
counters are the same. No functional changes.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Add 2 interfaces to stat io throttle information:
  blkio.throttle.total_io_queued
  blkio.throttle.total_bytes_queued

These interfaces are used for monitoring throttled io/bytes and
analyzing if delay has relation with io throttle.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

io throtl stats will blkg_get at the beginning of throttle and then
blkg_put at the new introduced bi_tg_end_io. This will cause blkg to be
freed if end_io is called twice like dm-thin, which will save origin
end_io first, and call its overwrite end_io and then the saved end_io.
After that, access blkg is invalid and finally BUG:

[ 4417.235048] BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0
[ 4417.236475] IP: [<ffffffff812e7c71>] throtl_update_dispatch_stats+0x21/0xb0
[ 4417.237865] PGD 98395067 PUD 362e1067 PMD 0
[ 4417.239232] Oops: 0000 [#1] SMP
......
[ 4417.274070] Call Trace:
[ 4417.275407]  [<ffffffff812ea93d>] blk_throtl_bio+0xfd/0x630
[ 4417.276760]  [<ffffffff810b3613>] ? wake_up_process+0x23/0x40
[ 4417.278079]  [<ffffffff81094c04>] ? wake_up_worker+0x24/0x30
[ 4417.279387]  [<ffffffff81095772>] ? insert_work+0x62/0xa0
[ 4417.280697]  [<ffffffff8116c2c7>] ? mempool_free_slab+0x17/0x20
[ 4417.282019]  [<ffffffff8116c6c9>] ? mempool_free+0x49/0x90
[ 4417.283326]  [<ffffffff812c9acf>] generic_make_request_checks+0x16f/0x360
[ 4417.284637]  [<ffffffffa0340d97>] ? thin_map+0x227/0x2c0 [dm_thin_pool]
[ 4417.285951]  [<ffffffff812c9ce7>] generic_make_request+0x27/0x130
[ 4417.287240]  [<ffffffffa0230b3d>] __map_bio+0xad/0x100 [dm_mod]
[ 4417.288503]  [<ffffffffa023257e>] __clone_and_map_data_bio+0x15e/0x240 [dm_mod]
[ 4417.289778]  [<ffffffffa02329ea>] __split_and_process_bio+0x38a/0x500 [dm_mod]
[ 4417.291062]  [<ffffffffa0232c91>] dm_make_request+0x131/0x1a0 [dm_mod]
[ 4417.292344]  [<ffffffff812c9da2>] generic_make_request+0xe2/0x130
[ 4417.293626]  [<ffffffff812c9e61>] submit_bio+0x71/0x150
[ 4417.294909]  [<ffffffff8121ab1d>] ? bio_alloc_bioset+0x20d/0x360
[ 4417.296195]  [<ffffffff81215acb>] _submit_bh+0x14b/0x220
[ 4417.297484]  [<ffffffff81215bb0>] submit_bh+0x10/0x20
[ 4417.298744]  [<ffffffffa016d8d8>] jbd2_journal_commit_transaction+0x6c8/0x19a0 [jbd2]
[ 4417.300014]  [<ffffffff810135b8>] ? __switch_to+0xf8/0x4c0
[ 4417.301268]  [<ffffffffa01731e9>] kjournald2+0xc9/0x270 [jbd2]
[ 4417.302524]  [<ffffffff810a0fd0>] ? wake_up_atomic_t+0x30/0x30
[ 4417.303753]  [<ffffffffa0173120>] ? commit_timeout+0x10/0x10 [jbd2]
[ 4417.304950]  [<ffffffff8109ffef>] kthread+0xcf/0xe0
[ 4417.306107]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
[ 4417.307255]  [<ffffffff81647f18>] ret_from_fork+0x58/0x90
[ 4417.308349]  [<ffffffff8109ff20>] ? kthread_create_on_node+0x140/0x140
......

Now we introduce a new bio flag BIO_THROTL_STATED to make sure
blkg_get/put only get called once for the same bio.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Add blkio.throttle.io_service_time and blkio.throttle.io_wait_time to
get per-cgroup io delay statistics.
io_service_time represents the time spent after io throttle to io
completion, while io_wait_time represents the time spent on throttle
queue.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Indeed tool iostat's await is not good enough, which is somewhat sketchy
and could not show request's latency on device driver's side.

Here we add a new counter to track io request's d2c time, also with this
patch, we can extend iostat to show this value easily.

Note:
I had checked how iostat is implemented, it just reads fields it needs,
so iostat won't be affected by this change, so does tsar.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 79d08f89bb1b5c2c1ff90d9bb95497ab9e8aa7e0 upstream

'bio->bi_iter.bi_size' is 'unsigned int', which at most hold 4G - 1
bytes.

Before 07173c3ec276 ("block: enable multipage bvecs"), one bio can
include very limited pages, and usually at most 256, so the fs bio
size won't be bigger than 1M bytes most of times.

Since we support multi-page bvec, in theory one fs bio really can
be added > 1M pages, especially in case of hugepage, or big writeback
with too many dirty pages. Then there is chance in which .bi_size
is overflowed.

Fixes this issue by using bio_full() to check if the added segment may
overflow .bi_size.
Signed-off-by: NHui Zhu <teawaterz@linux.alibaba.com>
Cc: Liu Yiding <liuyd.fnst@cn.fujitsu.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec276 ("block: enable multipage bvecs")
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8b37bc277fb459fa100808880a9d4e0641fff444 upstream.

There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 41591a51f00d2dc7bb9dc6e9bedf56c5cf6f2392 upstream.

This code causes a static analysis warning:

    block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'

We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish().  IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Function ioc_rqos_throttle() may called inside queue_lock.
We should unlock the queue_lock before entering sleep.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 9d179b865449b351ad5cb76dbea480c9170d4a27 upstream.

blkcg_activate_policy() has the following bugs.

* cf09a8ee19ad ("blkcg: pass @q and @blkcg into
  blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
  blkcg_activate_policy() ends up using pd's allocated for the root
  blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
  can be passed in pd's which are allocated for the root blkcg.

  For blk-iocost, this means that ->pd_init_fn() can write beyond the
  end of the allocated object as it determines the length of the flex
  array at the end based on the blkcg's nesting level.

* Each pd is initialized as they get allocated.  If alloc fails, the
  policy will get freed with pd's initialized on it.

* After the above partial failure, the partial pds are not freed.

This patch fixes all the above issues by

* Restructuring blkcg_activate_policy() so that alloc and init passes
  are separate.  Init takes place only after all allocs succeeded and
  on failure all allocated pds are freed.

* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 71c814077de60b2e7415dac6f5c4e98f59d521fd upstream.

When blkcg_activate_policy() is creating blkg_policy_data for existing
blkgs, it did in the wrong order - descendants first.  Fix it.  None
of the existing controllers seem affected by this.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

When the QoS targets are met and nothing is being throttled, there's
no way to tell how saturated the underlying device is - it could be
almost entirely idle, at the cusp of saturation or anywhere inbetween.
Given that there's no information, it's best to keep vrate as-is in
this state.  Before 7cd806a9a953 ("iocost: improve nr_lagging
handling"), this was the case - if the device isn't missing QoS
targets and nothing is being throttled, busy_level was reset to zero.

While fixing nr_lagging handling, 7cd806a9a953 ("iocost: improve
nr_lagging handling") broke this.  Now, while the device is hitting
QoS targets and nothing is being throttled, vrate keeps getting
adjusted according to the existing busy_level.

This led to vrate keeping climing till it hits max when there's an IO
issuer with limited request concurrency if the vrate started low.
vrate starts getting adjusted upwards until the issuer can issue IOs
w/o being throttled.  From then on, QoS targets keeps getting met and
nothing on the system needs throttling and vrate keeps getting
increased due to the existing busy_level.

This patch makes the following changes to the busy_level logic.

* Reset busy_level if nr_shortages is zero to avoid the above
  scenario.

* Make non-zero nr_lagging block lowering nr_level but still clear
  positive busy_level if there's clear non-saturation signal - QoS
  targets are met and nr_shortages is non-zero.  nr_lagging's role is
  preventing adjusting vrate upwards while there are long-running
  commands and it shouldn't keep busy_level positive while there's
  clear non-saturation signal.

* Restructure code for clarity and add comments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NAndy Newell <newella@fb.com>
Fixes: 7cd806a9a953 ("iocost: improve nr_lagging handling")
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7afcccafa59fb63b58f863a6c5e603a34625955b upstream.

The default hard disk param sets latency targets at 50ms.  As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.

This is excessively low.  A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.

Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7cd806a9a953f234b9865c30028f47fd738ce375 upstream.

Some IOs may span multiple periods.  As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate.  nr_lagging tracks these IOs to
avoid those situations.  Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.

This has the following two problems.

* When latency target percentiles aren't set, vrate adjustment should
  only be governed by queue depth depletion; however, the current code
  keeps nr_lagging active which pulls in latency results and can keep
  down vrate unexpectedly.

* When lagging condition is detected, it resets the entire negative
  busy_level.  This turned out to be way too aggressive on some
  devices which sometimes experience extended latencies on a small
  subset of commands.  In addition, a lagging IO will be accounted as
  latency target miss on completion anyway and resetting busy_level
  amplifies its impact unnecessarily.

This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 25d41e4aadb0788b4fae8a8fca90f437b9ebd727 upstream.

vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero.  busy_level turning to zero can sometimes
be as interesting an event.  This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Bios are not associated with blkg before entering iocost controller.
do it in ioc_rqos_throttle() as well as ioc_rqos_merge().

Considering that there are so many chances to create blkg before
ioc_rqos_merge(), we just lookup the blkg here and if blkg are not
exist, just return rather than create it.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

To support cgroup v1.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 7c1ee704a1d6450f92372d57f5b76a458b51c1d4 upstream.

Report debt and rename del_ms row to delay for consistency.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>