Make all the irq_domain_ops structures in powerpc 'static const'
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>

Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each revmap type
can do its own setup and the user doesn't need to keep track of how
each revmap type handles the arguments.

This patch also adds a host_data argument to the generators.  There are
cases where the host_data pointer will be needed before the function returns.
ie. the legacy map calls the .map callback for each irq before returning.

v2: - Add void *host_data argument to irq_domain_add_*() functions
    - fixed failure to compile
    - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>

This patch drops the powerpc-specific irq_host structures and uses the common
irq_domain strucutres defined in linux/irqdomain.h.  It also fixes all
the users to use the new structure names.

Renaming irq_host to irq_domain has been discussed for a long time, and this
patch is a step in the process of generalizing the powerpc virq code to be
usable by all architecture.

An astute reader will notice that this patch actually removes the irq_host
structure instead of renaming it.  This is because the irq_domain structure
already exists in include/linux/irqdomain.h and has the needed data members.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>

The only function of memblock_analyze() is now allowing resize of
memblock region arrays.  Rename it to memblock_allow_resize() and
update its users.

* The following users remain the same other than renaming.

  arm/mm/init.c::arm_memblock_init()
  microblaze/kernel/prom.c::early_init_devtree()
  powerpc/kernel/prom.c::early_init_devtree()
  openrisc/kernel/prom.c::early_init_devtree()
  sh/mm/init.c::paging_init()
  sparc/mm/init_64.c::paging_init()
  unicore32/mm/init.c::uc32_memblock_init()

* In the following users, analyze was used to update total size which
  is no longer necessary.

  powerpc/kernel/machine_kexec.c::reserve_crashkernel()
  powerpc/kernel/prom.c::early_init_devtree()
  powerpc/mm/init_32.c::MMU_init()
  powerpc/mm/tlb_nohash.c::__early_init_mmu()  
  powerpc/platforms/ps3/mm.c::ps3_mm_add_memory()
  powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups()
  sh/kernel/machine_kexec.c::reserve_crashkernel()

* x86/kernel/e820.c::memblock_x86_fill() was directly setting
  memblock_can_resize before populating memblock and calling analyze
  afterwards.  Call memblock_allow_resize() before start populating.

memblock_can_resize is now static inside memblock.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>

* early_init_devtree(): Total memory size is aligned to PAGE_SIZE;
  however, alignment isn't enforced if memory_limit is explicitly
  specified.  Simplify the logic and always apply PAGE_SIZE alignment.

* MMU_init(): memblock regions is truncated by directly modifying
  memblock.memory.cnt.  This is incomplete (reserved array is not
  truncated) and unnecessarily low level hindering further memblock
  improvments.  Use memblock_enforce_memory_limit() instead.

* wii_memory_fixups(): Unnecessarily low level direct manipulation of
  memblock regions.  The same result can be achieved using properly
  abstracted operations.  Reimplement using memblock API.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>

It turns out that there are only 2 in-tree platforms which use MPICs
which are not "primary":  IBM Cell and PowerMac.  To reduce the
complexity of the typical board setup code, invert the MPIC_PRIMARY bit
into MPIC_SECONDARY.
Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Almost all PowerPC platforms use a standard "open-pic" device node so
the mpic_alloc() function now accepts NULL for the device-node.  This
will cause it to perform a default search with of_find_matching_node().
Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The MPIC code can already perform an automatic OF address translation
step as part of mpic_alloc(), but several boards need to use that base
address when they perform mpic_assign_isu().

The easiest solution is to save the computed physical address into the
"struct mpic" for later use by the board code.
Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

So that we can clean up the header files and not be relying
on implicit includes from device.h ---> module.h
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NVitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

These all just clear chip or chipdata fields, which will be done
by the generic code when we call irq_free_descs.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

First step in eliminating irq_map[] table entirely
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Scripted with coccinelle.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use the proper accessors instead of open access to irq_desc.
Converted with coccinelle.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We check for a valid handler before calling ppc_md.machine_kexec_prepare
so we can just remove these empty handlers.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix memblock API change fallout in the WII code.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: linux-mm@kvack.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4C8B2AFA.2000705@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

via following scripts

      FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

      sed -i \
        -e 's/lmb/memblock/g' \
        -e 's/LMB/MEMBLOCK/g' \
        $FILES

      for N in $(find . -name lmb.[ch]); do
        M=$(echo $N | sed 's/lmb/memblock/g')
        mv $N $M
      done

and remove some wrong change like lmbench and dlmb etc.

also move memblock.c from lib/ to mm/
Suggested-by: NIngo Molnar <mingo@elte.hu>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

discontiguous => discontinuous
coealesce => coalesce
Signed-off-by: NThomas Weber <weber@corscience.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix the following build failures:

arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_map':
arch/powerpc/platforms/embedded6xx/flipper-pic.c:105: error: implicit declaration of function 'get_irq_desc'

arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_map':
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:98: error: implicit declaration of function 'get_irq_desc'

These failures are caused by the changes introduced in commit
"powerpc: Remove get_irq_desc()". The reason these drivers were not
updated is that they weren't merged yet.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix the following build failures:

arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_irq_cascade':
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:135: error: passing argument 1 of 'spin_lock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:137: error: passing argument 1 of 'spin_unlock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:145: error: passing argument 1 of 'spin_lock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:149: error: passing argument 1 of 'spin_unlock' from incompatible pointer type

These failures are caused by the changes introduced in commit
"genirq: Convert irq_desc.lock to raw_spinlock". The reason this driver
was not updated is that it wasn't merged yet.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The retry logic in ug_putc() is broken.

If the TX fifo is not ready and the counter runs out it will have a
value of -1 and no transfer should be attempted. Also, a counter
with a value of 0 means that the TX fifo got ready in the last try
and the transfer should be attempted.
Reported-by: N"Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: N"Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Enable the flag that allows a platform to ioremap memory marked
as reserved.

This is currently needed on the Nintendo Wii video game console
due to the workaround introduced in "wii: use both mem1 and mem2 as ram".

This will no longer be needed when proper discontig memory support
for 32-bit PowerPC is added to the kernel.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The Nintendo Wii video game console has two discontiguous RAM regions:
- MEM1: 24MB @ 0x00000000
- MEM2: 64MB @ 0x10000000

Unfortunately, the kernel currently does not support discontiguous RAM
memory regions on 32-bit PowerPC platforms.

This patch adds a series of workarounds to allow the use of the second
memory region (MEM2) as RAM by the kernel.
Basically, a single range of memory from the beginning of MEM1 to the
end of MEM2 is reported to the kernel, and a memory reservation is
created for the hole between MEM1 and MEM2.

With this patch the system is able to use all the available RAM and not
just ~27% of it.

This will no longer be needed when proper discontig memory support
for 32-bit PowerPC is added to the kernel.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add support for using the USB Gecko adapter as an early debugging
console on the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add platform support for the Nintendo Wii video game console.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add support for the dual interrupt controller included in the "Hollywood"
chipset of the Nintendo Wii video game console.
This interrupt controller serves both the Broadway processor (as a cascade)
and the Starlet processor, and is used to manage interrupts for the
non-classic hardware.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add platform support for the Nintendo GameCube video game console.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add support for the interrupt controller included in the "Flipper"
chipset of the Nintendo GameCube video game console.
The same interrupt controller is also present in the "Hollywood" chipset
of the Nintendo Wii.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add support for using the USB Gecko adapter via the udbg facility on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add a config option GAMECUBE_COMMON to be used as a dependency for all
options common to the Nintendo GameCube and Wii video game consoles.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

 - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
   on 6xx which is what they want anyway.

 - A new symbol, PPC_BOOK3S, is defined that represent compliance with
   the "Server" variant of the architecture. This is set when either 6xx
   or PPC64 is set and open the door for future BOOK3E 64-bit.

 - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
   PPC64 && PPC_BOOK3S

 - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
   used to control the use of prom_init.c
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Defining flash partition table in platform code is deprecated, and due to
recent changes linkstation and storcenter do not compile any more with
their default configurations because of undefined references to
physmap_set_partitions(). Instead of fixing them by using the correct
kernel configuration macro in preprocessor conditional, remove partition
table definitions altogether. Instead add support for partition definition
on the command-line and in device tree to the default configurations.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Default ops are implicit now.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The i2c bus defn is broken on linkstation / kurobox machines since at
least 2.6.27. Fix it. Also remove CONFIG_SERIAL_OF_PLATFORM, which, if
enabled, breaks the serial console after the
"console handover: boot [udbg0] -> real [ttyS1]" message.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Most of the platforms were printing the size of the memory
in their show_cpuinfo implementations. This moves that to
the common show_cpuinfo, so that all 32-bit platforms will
now print the size of memory.  I also update the code
to deal with the fact that total_memory is now a phys_addr_t.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For many of the embedded boards, "model" and "Machine" are printing
the same thing; remove the redundant code and allow the generic
show_cpuinfo to print the model information.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 5 of 5: add the Kconfig entry for the C2K board.
Signed-off-by: NRemi Machet <rmachet@slac.stanford.edu>
Signed-off-by: NPaul Mackerras <paulus@samba.org>