Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 16 2月, 2012 6 次提交
    • G
      irq_domain/powerpc: constify irq_domain_ops · 9f70b8eb
      由 Grant Likely 提交于 
      Make all the irq_domain_ops structures in powerpc 'static const'
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      9f70b8eb
    • G
      irq_domain: constify irq_domain_ops · a18dc81b
      由 Grant Likely 提交于 
      Make irq_domain_ops pointer a constant to make it safer for multiple
instances to share the same ops pointer and change the irq_domain code
so that it does not modify the ops.

v4: Fix mismatched type reference in powerpc code
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      a18dc81b
    • G
      irq_domain: Add support for base irq and hwirq in legacy mappings · 1bc04f2c
      由 Grant Likely 提交于 
      Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq)
so that a controller driver can allocate a fixed range of irq_descs and use
a simple calculation to translate back and forth between linux and hw irq
numbers.  This is needed to use an irq_domain with many of the ARM interrupt
controller drivers that manage their own irq_desc allocations.  Ultimately
the goal is to migrate those drivers to use the linear revmap, but doing it
this way allows each driver to be converted separately which makes the
migration path easier.

This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use
(first_irq-first_hwirq) as the offset between hwirq and linux irq number,
and adds checks to make sure that the hwirq number does not exceed range
assigned to the controller.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      1bc04f2c
    • G
      irq_domain: Replace irq_alloc_host() with revmap-specific initializers · a8db8cf0
      由 Grant Likely 提交于 
      Each revmap type has different arguments for setting up the revmap.
This patch splits up the generator functions so that each revmap type
can do its own setup and the user doesn't need to keep track of how
each revmap type handles the arguments.

This patch also adds a host_data argument to the generators.  There are
cases where the host_data pointer will be needed before the function returns.
ie. the legacy map calls the .map callback for each irq before returning.

v2: - Add void *host_data argument to irq_domain_add_*() functions
    - fixed failure to compile
    - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      a8db8cf0
    • G
      irq_domain: Move irq_domain code from powerpc to kernel/irq · cc79ca69
      由 Grant Likely 提交于 
      This patch only moves the code.  It doesn't make any changes, and the
code is still only compiled for powerpc.  Follow-on patches will generalize
the code for other architectures.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      cc79ca69
    • G
      irq_domain/powerpc: Eliminate virq_is_host() · 6d9285b0
      由 Grant Likely 提交于 
      There is only one user, and it is trivial to open-code.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      6d9285b0
  3. 15 2月, 2012 2 次提交
    • G
      irq_domain/powerpc: eliminate irq_map; use irq_alloc_desc() instead · 4bbdd45a
      由 Grant Likely 提交于 
      This patch drops the powerpc-specific irq_map table and replaces it with
directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating
and freeing irq_desc structures.

This patch is a preparation step for generalizing the powerpc-specific virq
infrastructure to become irq_domains.

As part of this change, the irq_big_lock is changed to a mutex from a raw
spinlock.  There is no longer any need to use a spin lock since the irq_desc
allocation code is now responsible for the critical section of finding
an unused range of irq numbers.

The radix lookup table is also changed to store the irq_data pointer instead
of the irq_map entry since the irq_map is removed.  This should end up being
functionally equivalent since only allocated irq_descs are ever added to the
radix tree.

v5: - Really don't ever allocate virq 0.  The previous version could still
      do it if hint == 0
    - Respect irq_virq_count setting for NOMAP.  Some NOMAP domains cannot
      use virq values above irq_virq_count.
    - Use numa_node_id() when allocating irq_descs.  Ideally the API should
      obtain that value from the caller, but that touches a lot of call sites
      so will be deferred to a follow-on patch.
    - Fix irq_find_mapping() to include irq numbers lower than
      NUM_ISA_INTERRUPTS.  With the switch to irq_alloc_desc*(), the lowest
      possible allocated irq is now returned by arch_probe_nr_irqs().
v4: - Fix incorrect access to irq_data structure in debugfs code
    - Don't ever allocate virq 0
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      4bbdd45a
    • G
      irq_domain/powerpc: Use common irq_domain structure instead of irq_host · bae1d8f1
      由 Grant Likely 提交于 
      This patch drops the powerpc-specific irq_host structures and uses the common
irq_domain strucutres defined in linux/irqdomain.h.  It also fixes all
the users to use the new structure names.

Renaming irq_host to irq_domain has been discussed for a long time, and this
patch is a step in the process of generalizing the powerpc virq code to be
usable by all architecture.

An astute reader will notice that this patch actually removes the irq_host
structure instead of renaming it.  This is because the irq_domain structure
already exists in include/linux/irqdomain.h and has the needed data members.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>
Tested-by: NOlof Johansson <olof@lixom.net>
      bae1d8f1
  5. 25 1月, 2012 4 次提交
  7. 18 1月, 2012 7 次提交
    • R
      powerpc/85xx: Add dr_mode property in USB nodes · 621c4b99
      由 Ramneek Mehresh 提交于 
      Add usb2 controller node for P1020RDB, P2020RDB, P2020DS, P1021MDS
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      621c4b99
    • R
      powerpc/85xx: Enable USB2 controller node for P1020RDB · 70a0ac66
      由 Ramneek Mehresh 提交于 
      Enable USB2 controller node for P1020RDB. USB2 controller is used only
when board boots from SPI or SD as it is muxed with eLBC
Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      70a0ac66
    • J
      powerpc/85xx: Fix cmd12 bug and add the chip compatible for eSDHC · f8b5a318
      由 Jerry Huang 提交于 
      According to latest kernel, the auto-cmd12 property should be
"sdhci,auto-cmd12", and according to the SDHC binding and the workaround for
the special chip, add the chip compatible for eSDHC: "fsl,p1022-esdhc",
"fsl,mpc8536-esdhc", "fsl,p1020-esdhc", "fsl,p2020-esdhc" and
"fsl,p1010-esdhc".
Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      f8b5a318
    • E
      audit: inline audit_syscall_entry to reduce burden on archs · b05d8447
      由 Eric Paris 提交于 
      Every arch calls:

if (unlikely(current->audit_context))
	audit_syscall_entry()

which requires knowledge about audit (the existance of audit_context) in
the arch code.  Just do it all in static inline in audit.h so that arch's
can remain blissfully ignorant.
Signed-off-by: NEric Paris <eparis@redhat.com>
      b05d8447
    • E
      Audit: push audit success and retcode into arch ptrace.h · d7e7528b
      由 Eric Paris 提交于 
      The audit system previously expected arches calling to audit_syscall_exit to
supply as arguments if the syscall was a success and what the return code was.
Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things
by converting from negative retcodes to an audit internal magic value stating
success or failure.  This helper was wrong and could indicate that a valid
pointer returned to userspace was a failed syscall.  The fix is to fix the
layering foolishness.  We now pass audit_syscall_exit a struct pt_reg and it
in turns calls back into arch code to collect the return value and to
determine if the syscall was a success or failure.  We also define a generic
is_syscall_success() macro which determines success/failure based on if the
value is < -MAX_ERRNO.  This works for arches like x86 which do not use a
separate mechanism to indicate syscall failure.

We make both the is_syscall_success() and regs_return_value() static inlines
instead of macros.  The reason is because the audit function must take a void*
for the regs.  (uml calls theirs struct uml_pt_regs instead of just struct
pt_regs so audit_syscall_exit can't take a struct pt_regs).  Since the audit
function takes a void* we need to use static inlines to cast it back to the
arch correct structure to dereference it.

The other major change is that on some arches, like ia64, MIPS and ppc, we
change regs_return_value() to give us the negative value on syscall failure.
THE only other user of this macro, kretprobe_example.c, won't notice and it
makes the value signed consistently for the audit functions across all archs.

In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old
audit code as the return value.  But the ptrace_64.h code defined the macro
regs_return_value() as regs[3].  I have no idea which one is correct, but this
patch now uses the regs_return_value() function, so it now uses regs[3].

For powerpc we previously used regs->result but now use the
regs_return_value() function which uses regs->gprs[3].  regs->gprs[3] is
always positive so the regs_return_value(), much like ia64 makes it negative
before calling the audit code when appropriate.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion]
Acked-by: Tony Luck <tony.luck@intel.com> [for ia64]
Acked-by: Richard Weinberger <richard@nod.at> [for uml]
Acked-by: David S. Miller <davem@davemloft.net> [for sparc]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
      d7e7528b
    • J
      arch/powerpc/sysdev/fsl_pci.c: add missing iounmap · 0cf572dc
      由 Julia Lawall 提交于 
      Add missing iounmap in error handling code, in a case where the function
already preforms iounmap on some other execution path.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
statement S,S1;
int ret;
@@
e = \(ioremap\|ioremap_nocache\)(...)
... when != iounmap(e)
if (<+...e...+>) S
... when any
    when != iounmap(e)
*if (...)
   { ... when != iounmap(e)
     return ...; }
... when any
iounmap(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      0cf572dc
    • M
      powerpc: fix compile error with 85xx/p1022_ds.c · ba8438fb
      由 Michael Neuling 提交于 
      Current linux-next compiled with mpc85xx_defconfig causes this:
 arch/powerpc/platforms/85xx/p1022_ds.c:341:14: error: 'udbg_progress' undeclared here (not in a function)

Add include to fix this.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
      ba8438fb
  9. 15 1月, 2012 1 次提交
    • S
      Kbuild: Use dtc's -d (dependency) option · 7c431851
      由 Stephen Warren 提交于 
      This hooks dtc into Kbuild's dependency system.

Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous
lack of this feature recently caused me to have very confusing "git
bisect" results.

For ARM, it's obvious what to add to $(targets). I'm not familiar enough
with other architectures to know what to add there. Powerpc appears to
already add various .dtb files into $(targets), but the other archs may
need something added to $(targets) to work.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
[mmarek: Dropped arch/c6x part to avoid merging commits from the middle
of the merge window]
Signed-off-by: NMichal Marek <mmarek@suse.cz>
      7c431851
  11. 13 1月, 2012 4 次提交
  13. 11 1月, 2012 2 次提交
  15. 07 1月, 2012 4 次提交
  17. 05 1月, 2012 10 次提交