Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] mnt_expire is protected by namespace_sem, no need for vfsmount_lock
  [PATCH] do shrink_submounts() for all fs types
  [PATCH] sanitize locking in mark_mounts_for_expiry() and shrink_submounts()
  [PATCH] count ghost references to vfsmounts
  [PATCH] reduce stack footprint in namespace.c

The Coverity checker spotted that we leak the storage allocated to 'name' in
int driver_add_kobj().  The leak looks legit to me - this is the code :

int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
                    const char *fmt, ...)
{
        va_list args;
        char *name;
        int ret;

        va_start(args, fmt);
        name = kvasprintf(GFP_KERNEL, fmt, args);
        ^^^^^^^^ This dynamically allocates space...

        va_end(args);

        if (!name)
                return -ENOMEM;

        return kobject_add(kobj, &drv->p->kobj, "%s", name);
	^^^^^^^^ This neglects to free the space allocated
}

Inside kobject_add() a copy of 'name' will be made and used.  As far as I can
see, Coverity is correct in flagging this as a leak, but I'd like some
configmation before the patch is applied.

This should fix it.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

write_err is an unsigned long used with set_bit() so should not be passed
around as unsigned int.

http://bugzilla.kernel.org/show_bug.cgi?id=10271Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/memstick/host/tifm_ms.c: In function 'tifm_ms_data_event':
drivers/memstick/host/tifm_ms.c:185: warning: 'p_off' may be used uninitialized in this function

Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

# reboot
...
[   42.351266] Flash device refused suspend due to active operation (state 0)
[   42.358195] Unable to handle kernel NULL pointer dereference at virtual address 00000078
[   42.360060] pgd = c7d9c000
[   42.362769] [00000078] *pgd=a7d8d031, *pte=00000000, *ppte=00000000
[   42.372902] Internal error: Oops: 17 [#1]
[   42.376911] Modules linked in:
[   42.379980] CPU: 0    Not tainted  (2.6.25-rc2-10642-ge8f2594-dirty #73)
[   42.380000] PC is at physmap_flash_shutdown+0x28/0x54
...
[   42.380000] Backtrace:
[   42.380000] [<c0130c1c>] (physmap_flash_shutdown+0x0/0x54) from [<c01207c0>] (platform_drv_shutdown+0x20/0x24)
[   42.380000]  r5:28121969 r4:c0229e08
[   42.380000] [<c01207a0>] (platform_drv_shutdown+0x0/0x24) from [<c011cd40>] (device_shutdown+0x60/0x88)
[   42.380000] [<c011cce0>] (device_shutdown+0x0/0x88) from [<c003e8a4>] (kernel_restart_prepare+0x2c/0x3c)
[   42.380000]  r4:00000000
[   42.380000] [<c003e878>] (kernel_restart_prepare+0x0/0x3c) from [<c003ea00>] (kernel_restart+0x14/0x48)
[   42.380000] [<c003e9ec>] (kernel_restart+0x0/0x48) from [<c003fdc0>] (sys_reboot+0xe8/0x1f8)
[   42.380000]  r4:01234567
[   42.380000] [<c003fcd8>] (sys_reboot+0x0/0x1f8) from [<c001aa00>] (ret_fast_syscall+0x0/0x2c)
[   42.380000]  r7:00000058 r6:00000004 r5:00000001 r4:00000000
[   42.380000] Code: 0a000009 e7953004 e1a00003 e1a0e00f (e593f078)
[   42.650051] ---[ end trace 6d6c26a0fc3141de ]---
Segmentation fault
INIT: no more processes left in this runlevel

While looping for mtd[i]s, we should stop at the mtd[i] == NULL.

This patch also removes unnecessary "if (info)" checks:
suspend/resume/shutdown ops are executed only if probe() is succeeded, so info
is guaranteed to be !NULL.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix regression in dm-crypt introduced in commit
3a7f6c99 ("dm crypt: use async crypto").

If write requests need to be split into pieces, the code must not process them
in parallel because the crypto context cannot be shared.  So there can be
parallel crypto operations on one part of the write, but only one write bio
can be processed at a time.

This is not optimal and the workqueue code needs to be optimized for parallel
processing, but for now it solves the problem without affecting the
performance of synchronous crypto operation (most of current dm-crypt users).

http://bugzilla.kernel.org/show_bug.cgi?id=10242
http://bugzilla.kernel.org/show_bug.cgi?id=10207Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prasanna has taken a new job. Update the MAINTAINERS file
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

blackfin video driver: fix bug when opening/reading/mmaping BF54x and BF52x framebuffer simultaneously

http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3974

opening/reading/mmaping BF54x and BF52x framebuffer simultaneously triggers
BUG: failure at mm/nommu.c:470/add_nommu_vma() Add VM_SHARED to the default
vm_flags
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Allocate pseudo_palette together with fbinfo
- Code cleanup
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 3c0a654e and
fixes kernel bug #10245:

	http://bugzilla.kernel.org/show_bug.cgi?id=10245

The HP Compaq nc6120 has the same PCI sub-device ID as the nx6110, and the
SMBus is used by ACPI for thermal management on the nc6120, so Linux should
not attach a native driver to it.  This means that this quirk is unsafe and
has to be removed.

I also added a comment to help developers realize that adding new IDs to this
SMBus unhiding quirk table should be done only with great care, and in
particular only after checking that ACPI is not making use of the SMBus.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Tomasz Koprowski <tomek@koprowski.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Neither of the headers actually compiles when included from userpsace nor
should it be made available as userspace tools should be using the libraries
or at least headers from e2fsprogs.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Will replace open-coded variants elsewhere.  Done in the same
style as the 32-bit versions.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jiri Benc <jbenc@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patch allows ixp4xx-beeper to be loaded by udev
automatically when compiled as a module with kernel versions 2.4.24 and
greater.

This patch is required because 43cc71ee
("platform: prefix MODALIAS with "platform:"") changed the modalias
string to have the extra prefix.

LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4

 looking at device '/devices/platform/ixp4xx-beeper.4':
   KERNEL=="ixp4xx-beeper.4"
   SUBSYSTEM=="platform"
   DRIVER==""
   ATTR{modalias}=="platform:ixp4xx-beeper"

udev therefore tries to modprobe platform:ixp4xx-beeper instead of
ixp4xx-beeper.

LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4
...
import_uevent_var: import into environment: 'PHYSDEVBUS=platform'
import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper'
main: looking at device '/devices/platform/ixp4xx-beeper.4' from
subsystem 'platform'
wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus'
appeared after 0 loops
main: run: 'socket:/org/kernel/udev/monitor'
main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper'

With this patch, depmod adds an alias line (see below) to
modules.alias which allows modprobe to load the right module.

alias platform:ixp4xx-beeper ixp4xx-beeper
Signed-off-by: NGordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This version brings proper quote tracking across lines, and brings the
handling of comments into the same mechanism ensuring nesting is correctly
handled.  It brings the usual flurry of fixes for false positives.  It also
brings a number of new checks.  The most contentious change will likely be
the checks for NR_CPUS as this throws some new warnings in kernel/sched.c.

Of note:
 - all new quote tracking across lines
 - all new comment tracking
 - new more direct, less ambigious wording for some warnings
 - recommends mutexes and completions over semaphores
 - recommends strict_strto* over simple_strto*
 - report on direct use of NR_CPUS

Andy Whitcroft (22):
      Version: 0.16
      string quote tracking should cross line boundaries
      check spacing round -> correctly across newlines
      checks for linux/ against asm/ include files should be warnings
      standardise on 'required' and 'prohibited'
      take the first end of condition when parsing statements
      values: cope with unbalanced brackets
      preprocessor #elif is not a function
      preprocessor #if should not trigger trailing statement checks
      test: allow us to limit output to a single error
      recommend real mutexes over semaphores
      asm checks should mirror those for __asm__
      warn on semaphores being used in place of completions
      trailing ; on control structure should ignore do {} while ();
      recommend strict_strtoX over simple_strtoX
      redo comment handling as a quote type
      use of NR_CPUS is normally wrong
      consistant spacing should only be about spaces
      if brace check suppression should only apply to the top-levels
      use tr/// to align spacing for operators
      move to using four parameter form of substr
      check and report modifications to include/asm
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mar 23 09:06:31 opensuse103 kernel: Installing 9P2000 support
Mar 23 09:06:31 opensuse103 kernel: sys_init_module: '9pnet_fd'->init suspiciously returned 1, it should follow 0/-E convention
Mar 23 09:06:31 opensuse103 kernel: sys_init_module: loading module anyway...
Mar 23 09:06:31 opensuse103 kernel: Pid: 5323, comm: modprobe Not tainted 2.6.25-rc6-git7-default #1
Mar 23 09:06:31 opensuse103 kernel:  [<c013c253>] sys_init_module+0x172b/0x17c9
Mar 23 09:06:31 opensuse103 kernel:  [<c0108a6a>] sys_mmap2+0x62/0x77
Mar 23 09:06:31 opensuse103 kernel:  [<c01059c4>] sysenter_past_esp+0x6d/0xa9
Mar 23 09:06:31 opensuse103 kernel:  =======================

Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@opteron.(none)>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <devzero@web.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Silence two kerneldoc warnings.

Warning(kernel/audit.c:1276): No description found for parameter 'string'
Warning(kernel/audit.c:1276): No description found for parameter 'len'

[also fix a typo for bonus points]
Signed-off-by: NDave Jones <davej@codemonkey.org.uk>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kafs doesn't check if the cell already exists - so if you do an echo "add
newcell.org 1.2.3.4" >/proc/fs/afs/cells it will try to create this cell
again.  kobject will also complain about a double registration.  To prevent
such problems, return -EEXIST in that case.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a MAINTAINERS record for AFS.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current nobh_write_end() implementation ignore partial writes(copied < len)
case if page was fully mapped and simply mark page as Uptodate, which is
totally wrong because area [pos+copied, pos+len) wasn't updated explicitly in
previous write_begin call.  It simply contains garbage from pagecache and
result in data leakage.

#TEST_CASE_BEGIN:
~~~~~~~~~~~~~~~~
In fact issue triggered by classical testcase
	open("/mnt/test", O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
	ftruncate(3, 409600)                    = 0
	writev(3, [{"a", 1}, {NULL, 4095}], 2)  = 1
##TESTCASE_SOURCE:
~~~~~~~~~~~~~~~~~
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <errno.h>
int main(int argc, char **argv)
{
	int fd,  ret;
	void* p;
	struct iovec iov[2];
	fd = open(argv[1], O_RDWR|O_CREAT|O_TRUNC, 0666);
	ftruncate(fd, 409600);
	iov[0].iov_base="a";
	iov[0].iov_len=1;
	iov[1].iov_base=NULL;
	iov[1].iov_len=4096;
	ret = writev(fd, iov, sizeof(iov)/sizeof(struct iovec));
	printf("writev  = %d, err = %d\n", ret, errno);
	return 0;
}
##TESTCASE RESULT:
~~~~~~~~~~~~~~~~~~
[root@ts63 ~]# mount | grep mnt2
/dev/mapper/test on /mnt2 type ext2 (rw,nobh)
[root@ts63 ~]#  /tmp/writev /mnt2/test
writev  = 1, err = 0
[root@ts63 ~]# hexdump -C /mnt2/test

00000000  61 65 62 6f 6f 74 00 00  f0 b9 b4 59 3a 00 00 00  |aeboot.....Y:...|
00000010  20 00 00 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000020  df df df df df df df df  df df df df df df df df  |................|
00000030  3a 00 00 00 2a 00 00 00  21 00 00 00 00 00 00 00  |:...*...!.......|
00000040  60 c0 8c 00 00 00 00 00  40 4a 8d 00 00 00 00 00  |`.......@J......|
00000050  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000060  74 69 6d 65 20 64 64 20  69 66 3d 2f 64 65 76 2f  |time dd if=/dev/|
00000070  6c 6f 6f 70 30 20 20 6f  66 3d 2f 64 65 76 2f 6e  |loop0  of=/dev/n|
skip..
00000f50  00 00 00 00 00 00 00 00  31 00 00 00 00 00 00 00  |........1.......|
00000f60  6d 6b 66 73 2e 65 78 74  33 20 2f 64 65 76 2f 76  |mkfs.ext3 /dev/v|
00000f70  7a 76 67 2f 74 65 73 74  20 2d 62 34 30 39 36 00  |zvg/test -b4096.|
00000f80  a0 fe 8c 00 00 00 00 00  21 00 00 00 00 00 00 00  |........!.......|
00000f90  23 31 32 30 35 39 35 30  34 30 34 00 3a 00 00 00  |#1205950404.:...|
00000fa0  20 00 8d 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000fb0  d0 cf 8c 00 00 00 00 00  10 d0 8c 00 00 00 00 00  |................|
00000fc0  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000fd0  6d 6f 75 6e 74 20 2f 64  65 76 2f 76 7a 76 67 2f  |mount /dev/vzvg/|
00000fe0  74 65 73 74 20 20 2f 76  7a 20 2d 6f 20 64 61 74  |test  /vz -o dat|
00000ff0  61 3d 77 72 69 74 65 62  61 63 6b 00 00 00 00 00  |a=writeback.....|
00001000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

As you can see file's page contains garbage from pagecache instead of zeros.
#TEST_CASE_END

Attached patch:
- Add sanity check BUG_ON in order to prevent incorrect usage by caller,
  This is function invariant because page can has buffers and in no zero
  *fadata pointer at the same time.
- Always attach buffers to page is it is partial write case.
- Always switch back to generic_write_end if page has buffers.
  This is reasonable because if page already has buffer then generic_write_begin
  was called previously.
Signed-off-by: NDmitri Monakhov <dmonakhov@openvz.org>
Reviewed-by: NNick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call mm_free_cgroup earlier.  Otherwise a reference due to lazy mm switching
can prevent cgroup removal.
Signed-off-by: NYAMAMOTO Takashi <yamamoto@valinux.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Discourage people from inappropriately using in_atomic()
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/drm/ati_pcigart.c: In function 'drm_ati_pcigart_init':
drivers/char/drm/ati_pcigart.c:125: warning: format '%08X' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'

Cc: Dave Airlie <airlied@linux.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This has been forgotten in commit f5bbdacc ("[MTD] NAND Modularize
read function") and nobody compiled the driver.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I believe http://bugzilla.kernel.org/show_bug.cgi?id=10318 is a false
positive.  There's no way in which networking will be using highmem pages
here, so it won't be taking the KM_USER0 kmap slot, so there's no point in
performing these checks.

Cc: Pawel Staszewski <pstaszewski@artcom.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
 [ Really sad.  We lose almost all real-life coverage of the debug tests
   with this patch. Now it will only report problems for the cases where
   people actually end up using a HIGHMEM page, not when they just _might_
   use one.    - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because of a typo in iwch_accept_cr(), the cxgb3 connection handling
code programs the hardware IRD (incoming RDMA read queue depth) with
the value that is passed in for the ORD (outgoing RDMA read queue
depth).  In particular this means that if an application passes in IRD
> 0 and ORD = 0 (which is a completely sane and valid thing to do for
an app that expects only incoming RDMA read requests), then the
hardware will end up programmed with IRD = 0 and the app will fail in
a mysterious way.

Fix this by using "ep->ird" instead of "ep->ord" in the intended place.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix missed hardware breakpoints across multiple threads

Revert commit 1192aeb9 ("ACPI:
drivers/acpi: elide a non-zero test on a result that is never 0")
because it turns out that thermal_cooling_device_register() does
actually return NULL if CONFIG_THERMAL is turned off (then the routine
turns into a dummy inline routine in the header files that returns NULL
unconditionally).

This was found with randconfig testing, causing a crash during bootup:

  initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51()
  Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c()
  BUG: unable to handle kernel NULL pointer dereference at 00000000
  IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in:

  Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14)
  EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0
  EIP is at acpi_fan_add+0x7d/0xfd
  EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007
  ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc
   DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000)
  Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda
         b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584
         b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558
  Call Trace:
   [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb
   [<783005d7>] ? driver_probe_device+0x82/0xfc
   [<783007f6>] ? __driver_attach+0x3a/0x70
   [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60
   [<7830048c>] ? driver_attach+0x14/0x16
   [<783007bc>] ? __driver_attach+0x0/0x70
   [<7830006a>] ? bus_add_driver+0x9d/0x1b0
   [<783008c3>] ? driver_register+0x47/0xa3
   [<7813db00>] ? timespec_to_ktime+0x9/0xc
   [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c
   [<78878592>] ? acpi_fan_init+0xd/0x2c
   [<78863656>] ? kernel_init+0xac/0x1f9
   [<788635aa>] ? kernel_init+0x0/0x1f9
   [<78114563>] ? kernel_thread_helper+0x7/0x10
   =======================
  Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e
  EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc
  ---[ end trace 778e504de7e3b1e3 ]---
  Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in the powerpc DABR (data access breakpoint) handling,
which can result in us missing breakpoints if several threads are trying
to break on the same address.

The circumstances are that do_page_fault() calls do_dabr(), this clears
the DABR (sets it to 0) and sets up the signal which will report to
userspace that the DABR was hit. The do_signal() code will restore the DABR
value on the way out to userspace.

If we reschedule before calling do_signal(), __switch_to() will check the
cached DABR value and compare it to the new thread's value, if they match
we don't set the DABR in hardware.

So if two threads have the same DABR value, and we schedule from one to
the other after taking the interrupt for the first thread hitting the DABR,
the second thread will run without the DABR set in hardware.

The cleanest fix is to move the cache update into set_dabr(), that way we
can't forget to do it.
Reported-by: NJan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit 3811dbf6.

The masking was not at all useless, and it was sensible.  We handle
GFP_ZERO in the caller, and passing it down to any page allocator logic
is buggy and wrong.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: comment documentation update.
  lguest: Don't need comment terminator before disk section.
  lguest: lguest.txt documentation fix
  lguest: Add puppies which where previously missing.
  virtio_pci: unregister virtio device at device remove

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and take it out of ->umount_begin() instances.  Call with all locks
already taken (by do_umount()) and leave calling release_mounts() to
caller (it will do release_mounts() anyway, so we can just put into
the same list).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and fix a race on access of ->mnt_share et.al. without namespace_sem
in the latter.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

make propagate_mount_busy() exclude references from the vfsmounts
that had been isolated by umount_tree() and are just waiting for
release_mounts() to dispose of their ->mnt_parent/->mnt_mountpoint.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

A lot of places misuse struct nameidata when they need struct path.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Mention the config options for the Virtio drivers and move the Virtualization
menu to the toplevel.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>