提交 f5bbdacc 编写于 作者: T Thomas Gleixner 提交者: David Woodhouse

[MTD] NAND Modularize read function

Split the core of the read function out and implement
seperate handling functions for software and hardware
ECC.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 9577f44a
......@@ -968,12 +968,14 @@ static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, unsign
return 0;
}
static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *isnull)
{
int i, ret = 0;
struct nand_chip *this = mtd->priv;
struct doc_priv *doc = this->priv;
void __iomem *docptr = doc->virtadr;
uint8_t calc_ecc[6];
volatile u_char dummy;
int emptymatch = 1;
......
......@@ -976,256 +976,224 @@ static int nand_verify_pages(struct mtd_info *mtd, struct nand_chip *chip, int p
#endif
/**
* nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
*
* This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL
* and flags = 0xff
* nand_read_page_swecc - {REPLACABLE] software ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, uint8_t *buf)
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf)
{
return nand_do_read_ecc(mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff);
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->oob_buf + mtd->oobsize;
uint8_t *ecc_code = ecc_calc + mtd->oobsize;
int *eccpos = chip->autooob->eccpos;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_buf, mtd->oobsize);
if (chip->ecc.mode == NAND_ECC_NONE)
return 0;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
for (i = 0; i < chip->ecc.total; i++)
ecc_code[i] = chip->oob_buf[eccpos[i]];
eccsteps = chip->ecc.steps;
p = buf;
for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
if (stat == -1)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
}
return 0;
}
/**
* nand_do_read_ecc - [MTD Interface] Read data with ECC
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
* @oob_buf: filesystem supplied oob data buffer (can be NULL)
* @oobsel: oob selection structure
* @flags: flag to indicate if nand_get_device/nand_release_device should be preformed
* and how many corrected error bits are acceptable:
* bits 0..7 - number of tolerable errors
* bit 8 - 0 == do not get/release chip, 1 == get/release chip
* nand_read_page_hwecc - {REPLACABLE] hardware ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
*
* NAND read with ECC
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
int nand_do_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf, uint8_t *oob_buf, struct nand_oobinfo *oobsel, int flags)
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf)
{
int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
struct nand_chip *chip = mtd->priv;
uint8_t *data_poi, *oob_data = oob_buf;
uint8_t ecc_calc[32];
uint8_t ecc_code[32];
int eccmode, eccsteps;
int *oob_config, datidx;
int blockcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int eccbytes;
int compareecc = 1;
int oobreadlen;
DEBUG(MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int)from, (int)len);
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
*retlen = 0;
return -EINVAL;
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->oob_buf + mtd->oobsize;
uint8_t *ecc_code = ecc_calc + mtd->oobsize;
int *eccpos = chip->autooob->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
chip->read_buf(mtd, chip->oob_buf, mtd->oobsize);
/* Grab the lock and see if the device is available */
if (flags & NAND_GET_DEVICE)
nand_get_device(chip, mtd, FL_READING);
for (i = 0; i < chip->ecc.total; i++)
ecc_code[i] = chip->oob_buf[eccpos[i]];
/* Autoplace of oob data ? Use the default placement scheme */
if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
oobsel = chip->autooob;
eccsteps = chip->ecc.steps;
p = buf;
eccmode = oobsel->useecc ? chip->ecc.mode : NAND_ECC_NONE;
oob_config = oobsel->eccpos;
for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
/* Select the NAND device */
chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
/* First we calculate the starting page */
realpage = (int)(from >> chip->page_shift);
page = realpage & chip->pagemask;
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
if (stat == -1)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
}
return 0;
}
/* Get raw starting column */
col = from & (mtd->writesize - 1);
/**
* nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and .
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *oob = chip->oob_buf;
end = mtd->writesize;
ecc = chip->ecc.size;
eccbytes = chip->ecc.bytes;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
if ((eccmode == NAND_ECC_NONE) || (chip->options & NAND_HWECC_SYNDROME))
compareecc = 0;
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
oobreadlen = mtd->oobsize;
if (chip->options & NAND_HWECC_SYNDROME)
oobreadlen -= oobsel->eccbytes;
if (chip->ecc.prepad) {
chip->read_buf(mtd, oob, chip->ecc.prepad);
oob += chip->ecc.prepad;
}
/* Loop until all data read */
while (read < len) {
chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
chip->read_buf(mtd, oob, eccbytes);
stat = chip->ecc.correct(mtd, p, oob, NULL);
int aligned = (!col && (len - read) >= end);
/*
* If the read is not page aligned, we have to read into data buffer
* due to ecc, else we read into return buffer direct
*/
if (aligned)
data_poi = &buf[read];
if (stat == -1)
mtd->ecc_stats.failed++;
else
data_poi = chip->data_buf;
mtd->ecc_stats.corrected += stat;
/* Check, if we have this page in the buffer
*
* FIXME: Make it work when we must provide oob data too,
* check the usage of data_buf oob field
*/
if (realpage == chip->pagebuf && !oob_buf) {
/* aligned read ? */
if (aligned)
memcpy(data_poi, chip->data_buf, end);
goto readdata;
}
oob += eccbytes;
/* Check, if we must send the read command */
if (sndcmd) {
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
sndcmd = 0;
if (chip->ecc.postpad) {
chip->read_buf(mtd, oob, chip->ecc.postpad);
oob += chip->ecc.postpad;
}
}
/* get oob area, if we have no oob buffer from fs-driver */
if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
oob_data = &chip->data_buf[end];
eccsteps = chip->ecc.steps;
switch (eccmode) {
case NAND_ECC_NONE:{
/* No ECC, Read in a page */
static unsigned long lastwhinge = 0;
if ((lastwhinge / HZ) != (jiffies / HZ)) {
printk(KERN_WARNING
"Reading data from NAND FLASH without ECC is not recommended\n");
lastwhinge = jiffies;
}
chip->read_buf(mtd, data_poi, end);
break;
}
/* Calculate remaining oob bytes */
i = oob - chip->oob_buf;
if (i)
chip->read_buf(mtd, oob, i);
case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
chip->read_buf(mtd, data_poi, end);
for (i = 0, datidx = 0; eccsteps; eccsteps--, i += 3, datidx += ecc)
chip->ecc.calculate(mtd, &data_poi[datidx], &ecc_calc[i]);
break;
return 0;
}
default:
for (i = 0, datidx = 0; eccsteps; eccsteps--, i += eccbytes, datidx += ecc) {
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, &data_poi[datidx], ecc);
/* HW ecc with syndrome calculation must read the
* syndrome from flash immidiately after the data */
if (!compareecc) {
/* Some hw ecc generators need to know when the
* syndrome is read from flash */
chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
chip->read_buf(mtd, &oob_data[i], eccbytes);
/* We calc error correction directly, it checks the hw
* generator for an error, reads back the syndrome and
* does the error correction on the fly */
ecc_status = chip->ecc.correct(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]);
if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_read_ecc: "
"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
ecc_failed++;
}
} else {
chip->ecc.calculate(mtd, &data_poi[datidx], &ecc_calc[i]);
}
}
break;
}
/**
* nand_do_read - [Internal] Read data with ECC
*
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
*
* Internal function. Called with chip held.
*/
int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
int chipnr, page, realpage, col, bytes, aligned;
struct nand_chip *chip = mtd->priv;
struct mtd_ecc_stats stats;
int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
int sndcmd = 1;
int ret = 0;
uint32_t readlen = len;
uint8_t *bufpoi;
/* read oobdata */
chip->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
stats = mtd->ecc_stats;
/* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
if (!compareecc)
goto readoob;
chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
/* Pick the ECC bytes out of the oob data */
for (j = 0; j < oobsel->eccbytes; j++)
ecc_code[j] = oob_data[oob_config[j]];
realpage = (int)(from >> chip->page_shift);
page = realpage & chip->pagemask;
/* correct data, if necessary */
for (i = 0, j = 0, datidx = 0; i < chip->ecc.steps; i++, datidx += ecc) {
ecc_status = chip->ecc.correct(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
col = (int)(from & (mtd->writesize - 1));
/* Get next chunk of ecc bytes */
j += eccbytes;
while(1) {
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
/* Check, if we have a fs supplied oob-buffer,
* This is the legacy mode. Used by YAFFS1
* Should go away some day
*/
if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
int *p = (int *)(&oob_data[mtd->oobsize]);
p[i] = ecc_status;
}
/* Is the current page in the buffer ? */
if (realpage != chip->pagebuf) {
bufpoi = aligned ? buf : chip->data_buf;
if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
DEBUG(MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
ecc_failed++;
if (likely(sndcmd)) {
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
sndcmd = 0;
}
}
readoob:
/* check, if we have a fs supplied oob-buffer */
if (oob_buf) {
/* without autoplace. Legacy mode used by YAFFS1 */
switch (oobsel->useecc) {
case MTD_NANDECC_AUTOPLACE:
case MTD_NANDECC_AUTOPL_USR:
/* Walk through the autoplace chunks */
for (i = 0; oobsel->oobfree[i][1]; i++) {
int from = oobsel->oobfree[i][0];
int num = oobsel->oobfree[i][1];
memcpy(&oob_buf[oob], &oob_data[from], num);
oob += num;
}
/* Now read the page into the buffer */
ret = chip->ecc.read_page(mtd, chip, bufpoi);
if (ret < 0)
break;
case MTD_NANDECC_PLACE:
/* YAFFS1 legacy mode */
oob_data += chip->ecc.steps * sizeof(int);
default:
oob_data += mtd->oobsize;
/* Transfer not aligned data */
if (!aligned) {
chip->pagebuf = realpage;
memcpy(buf, chip->data_buf + col, bytes);
}
if (!(chip->options & NAND_NO_READRDY)) {
/*
* Apply delay or wait for ready/busy pin. Do
* this before the AUTOINCR check, so no
* problems arise if a chip which does auto
* increment is marked as NOAUTOINCR by the
* board driver.
*/
if (!chip->dev_ready)
udelay(chip->chip_delay);
else
nand_wait_ready(mtd);
}
}
readdata:
/* Partial page read, transfer data into fs buffer */
if (!aligned) {
for (j = col; j < end && read < len; j++)
buf[read++] = data_poi[j];
chip->pagebuf = realpage;
} else
read += mtd->writesize;
memcpy(buf, chip->data_buf + col, bytes);
/* Apply delay or wait for ready/busy pin
* Do this before the AUTOINCR check, so no problems
* arise if a chip which does auto increment
* is marked as NOAUTOINCR by the board driver.
*/
if (!chip->dev_ready)
udelay(chip->chip_delay);
else
nand_wait_ready(mtd);
buf += bytes;
readlen -= bytes;
if (read == len)
if (!readlen)
break;
/* For subsequent reads align to page boundary. */
......@@ -1240,24 +1208,51 @@ int nand_do_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
chip->select_chip(mtd, -1);
chip->select_chip(mtd, chipnr);
}
/* Check, if the chip supports auto page increment
* or if we have hit a block boundary.
*/
if (!NAND_CANAUTOINCR(chip) || !(page & blockcheck))
if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
sndcmd = 1;
}
/* Deselect and wake up anyone waiting on the device */
if (flags & NAND_GET_DEVICE)
nand_release_device(mtd);
*retlen = len - (size_t) readlen;
/*
* Return success, if no ECC failures, else -EBADMSG
* fs driver will take care of that, because
* retlen == desired len and result == -EBADMSG
*/
*retlen = read;
return ecc_failed ? -EBADMSG : 0;
if (ret)
return ret;
return mtd->ecc_stats.failed - stats.failed ? -EBADMSG : 0;
}
/**
* nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
* @mtd: MTD device structure
* @from: offset to read from
* @len: number of bytes to read
* @retlen: pointer to variable to store the number of read bytes
* @buf: the databuffer to put data
*
* Get hold of the chip and call nand_do_read
*/
static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf)
{
int ret;
*retlen = 0;
/* Do not allow reads past end of device */
if ((from + len) > mtd->size)
return -EINVAL;
if (!len)
return 0;
nand_get_device(mtd->priv, mtd, FL_READING);
ret = nand_do_read(mtd, from, len, retlen, buf);
nand_release_device(mtd);
return ret;
}
/**
......@@ -2417,6 +2412,10 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
*/
switch (chip->ecc.mode) {
case NAND_ECC_HW:
/* Use standard hwecc read page function ? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_hwecc;
case NAND_ECC_HW_SYNDROME:
if (!chip->ecc.calculate || !chip->ecc.correct ||
!chip->ecc.hwctl) {
......@@ -2424,6 +2423,10 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
"Hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read page function ? */
if (!chip->ecc.read_page)
chip->ecc.read_page = nand_read_page_syndrome;
if (mtd->writesize >= chip->ecc.size)
break;
printk(KERN_WARNING "%d byte HW ECC not possible on "
......@@ -2434,6 +2437,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
case NAND_ECC_SOFT:
chip->ecc.calculate = nand_calculate_ecc;
chip->ecc.correct = nand_correct_data;
chip->ecc.read_page = nand_read_page_swecc;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
break;
......@@ -2441,6 +2445,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
case NAND_ECC_NONE:
printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. "
"This is not recommended !!\n");
chip->ecc.read_page = nand_read_page_swecc;
chip->ecc.size = mtd->writesize;
chip->ecc.bytes = 0;
break;
......@@ -2459,6 +2464,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
printk(KERN_WARNING "Invalid ecc parameters\n");
BUG();
}
chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
/* Initialize state */
chip->state = FL_READY;
......
......@@ -444,7 +444,8 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha
* note: see pages 34..37 of data sheet for details.
*
*/
static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page)
static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this,
int state, int status, int page)
{
int er_stat = 0;
int rtn, retlen;
......@@ -455,39 +456,50 @@ static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, int s
this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1);
if (state == FL_ERASING) {
for (i = 0; i < 4; i++) {
if (status & 1 << (i + 1)) {
this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1), -1, -1);
rtn = this->read_byte(mtd);
this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
er_stat |= 1 << (i + 1); /* err_ecc_not_avail */
}
}
if (!(status & 1 << (i + 1)))
continue;
this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1),
-1, -1);
rtn = this->read_byte(mtd);
this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
/* err_ecc_not_avail */
if (!(rtn & ERR_STAT_ECC_AVAILABLE))
er_stat |= 1 << (i + 1);
}
} else if (state == FL_WRITING) {
unsigned long corrected = mtd->ecc_stats.corrected;
/* single bank write logic */
this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1);
rtn = this->read_byte(mtd);
this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1);
if (!(rtn & ERR_STAT_ECC_AVAILABLE)) {
er_stat |= 1 << 1; /* err_ecc_not_avail */
} else {
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1; /* if we can't check, assume failed */
} else {
/* recovery read */
/* page read */
rtn = nand_do_read_ecc(mtd, page, len, &retlen, buf, NULL, this->autooob, 1);
if (rtn) { /* if read failed or > 1-bit error corrected */
er_stat |= 1 << 1; /* ECC read failed */
}
kfree(buf);
}
/* err_ecc_not_avail */
er_stat |= 1 << 1;
goto out;
}
len = mtd->writesize;
buf = kmalloc(len, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "rtc_from4_errstat: Out of memory!\n");
er_stat = 1;
goto out;
}
/* recovery read */
rtn = nand_do_read(mtd, page, len, &retlen, buf);
/* if read failed or > 1-bit error corrected */
if (rtn || (mtd->ecc_stats.corrected - corrected) > 1) {
er_stat |= 1 << 1;
kfree(buf);
}
rtn = status;
......
......@@ -479,14 +479,14 @@ struct nand_bbt_descr {
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
extern int nand_default_bbt (struct mtd_info *mtd);
extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, uint8_t * buf, uint8_t * oob_buf,
struct nand_oobinfo *oobsel, int flags);
extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
extern int nand_default_bbt(struct mtd_info *mtd);
extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt);
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, uint8_t * buf);
/*
* Constants for oob configuration
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册