This tidies up some of the rts7751r2d mess and gets it booting
again. Update the defconfig, too.
Signed-off-by: NMasayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Tidy up the R7780RP I/O mapping routines and switch the
pata_platform resources to IORESOURCE_MEM types, killing off
the useless port->addr conversion.

This fixes up R7780RP to boot after the recent devres conversion.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This ended up causing problems for older parts (particularly ones
using PTEA). Revert this for now, it can be added back in once it's
had some more testing.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

sh was missing these, too.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some boards need this, so provide a definition.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This is used by the libc for parsing CPU capability flags passed
via the ELF auxvt, needed for run-time selection of atomic opcodes
amongst other things.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This was breaking the uClibc build, which triggered the bogus page
size error.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

We accidentally broke the inotify syscalls, fix those up again.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Convert some of the global flush users over to using the local variants
that don't need to use the global routines.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Rename the existing flush routines to local_ variants for use by
the IPI-backed global flush routines on SMP.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This option needs a default - otherwise `make allmodconfig' gets
stuck in an infinite loop.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for
CONFIG_BUG, make sure it's not built when CONFIG_BUG=n.
Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Only SH-4 needs to set _PAGE_WT when using write-through caching,
don't attempt to set it on SH-3 where it ends up being a reserved
bit.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

There were a few more things that needed fixing up, namely THREAD_SIZE
and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE
assumptions were being made.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fixups for external IPR IRQs for the SE770x FPGA.
Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update se7750_defconfig.
Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This fixes up shmin (and SH7706/SH7708) IPR support for some of the
recent API changes.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The iVDR clock enable bit happens to actually reside in a rather
different place than what is documented, so fix it up accordingly.
This fixes up SATA boot for some of the R7780RP boards that didn't
default-enable the clock in the loader.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This allows the baud rate for earlyprintk for sh4 without the
standard BIOS to be set via the command line. This uses the same
format as i386 and x86_64, which is:

	earlyprintk=serial,ttySC1,38400

The second parameter (ttySC1 above) is usually the console device
name or the io address of the serial port. I allow that to be
specified but ignore it in order to keep the format the same as
i386/x86_64.
Signed-off-by: NJamie Lenehan <lenehan@twibble.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

syscall number 300 fails while testing with latest LTP
(ltp-full-20061121.tgz) on sh.

sys_fstatat64 is called on syscall 300 (see arch/sh/kernel/syscalls.S),
and __ARCH_WANT_STAT64 is defined in include/asm-sh/unistd.h, so
following patch seems correct.
Signed-off-by: NSUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

IPR initialize proceduere update.
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

-m2 doesn't end up working particularly well when we've got a constrained
toolchain target. Switch to the same semantics used by SH-4A to attempt
to get it right. Spotted by Alex Song <songqf9@yahoo.ca>.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This rips out most of the needlessly complicated sh_bios and kgdb
trap handling, and forces it all through a common fast dispatch path.
As more debug traps are inserted, it's important to keep them in sync
for all of the parts, not just SH-3/4.

As the SH-2 parts are unable to do traps in the >= 0x40 range, we
restrict the debug traps to the 0x30-0x3f range on all parts, and
also bump the kgdb breakpoint trap down in to this range (from 0xff
to 0x3c) so it's possible to use for nommu.

Optionally, this table can be padded out to catch spurious traps for
SH-3/4, but we don't do that yet..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Re-export saved_command_line to modules.
  [SPARC64]: Increase command line size to 2048 like other arches.
  [SPARC64]: We do not need ZONE_DMA.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [XFRM]: Fix OOPSes in xfrm_audit_log().
  [TCP]: cleanup of htcp (resend)
  [TCP]: Use read mostly for CUBIC parameters.
  [NETFILTER]: nf_conntrack_tcp: make sysctl variables static
  [NETFILTER]: ip6t_mh: drop piggyback payload packet on MH packets
  [NETFILTER]: Fix whitespace errors
  [NETFILTER]: Kconfig: improve dependency handling
  [NETFILTER]: xt_mac/xt_CLASSIFY: use IPv6 hook names for IPv6 registration
  [NETFILTER]: nf_conntrack: change nf_conntrack_l[34]proto_unregister to void
  [NETFILTER]: nf_conntrack: properly use RCU for nf_conntrack_destroyed callback
  [NETFILTER]: ip_conntrack: properly use RCU for ip_conntrack_destroyed callback
  [NETFILTER]: nf_conntrack: fix invalid conntrack statistics RCU assumption
  [NETFILTER]: ip_conntrack: fix invalid conntrack statistics RCU assumption
  [NETFILTER]: nf_conntrack: properly use RCU API for nf_ct_protos/nf_ct_l3protos arrays
  [NETFILTER]: ip_conntrack: properly use RCU API for ip_ct_protos array
  [NETFILTER]: nf_nat: properly use RCU API for nf_nat_protos array
  [NETFILTER]: ip_nat: properly use RCU API for ip_nat_protos array
  [NETFILTER]: nf_log: minor cleanups
  [NETFILTER]: nf_log: switch logger registration/unregistration to mutex
  [NETFILTER]: nf_log: make nf_log_unregister_pf return void
  ...

This reverts some bogosity from the dynamic command-line
changes made on sparc32 and sparc64.

Drivers such as drivers/sbus/char/openprom.c reference
saved_command_line, and can be modular.

The boot_command_line is __initdata, yet the dynamic command-line
changes add modular exports of that symbol, obviously wrong.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>