sh: add SH7760 IPR IRQ data

Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/sh4/setup-sh7760.c

@@ -52,17 +52,11 @@ static int __init sh7760_devices_setup(void)
 }
 __initcall(sh7760_devices_setup);
 
-/*
- * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
- */
 static struct intc2_data intc2_irq_table[] = {
-	/* INTPRIO0 | INTMSK0 */
 	{48,  0, 28, 0, 31,  3},	/* IRQ 4 */
 	{49,  0, 24, 0, 30,  3},	/* IRQ 3 */
 	{50,  0, 20, 0, 29,  3},	/* IRQ 2 */
 	{51,  0, 16, 0, 28,  3},	/* IRQ 1 */
-	/* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
-	/* INTPRIO4 | INTMSK0 */
 	{56,  4, 28, 0, 25,  3},	/* HCAN2_CHAN0 */
 	{57,  4, 24, 0, 24,  3},	/* HCAN2_CHAN1 */
 	{58,  4, 20, 0, 23,  3},	/* I2S_CHAN0   */
@@ -71,18 +65,15 @@ static struct intc2_data intc2_irq_table[] = {
 	{61,  4,  8, 0, 20,  3},	/* AC97_CHAN1  */
 	{62,  4,  4, 0, 19,  3},	/* I2C_CHAN0   */
 	{63,  4,  0, 0, 18,  3},	/* I2C_CHAN1   */
-	/* INTPRIO8 | INTMSK0 */
 	{52,  8, 16, 0, 11,  3},	/* SCIF0_ERI_IRQ */
 	{53,  8, 16, 0, 10,  3},	/* SCIF0_RXI_IRQ */
 	{54,  8, 16, 0,  9,  3},	/* SCIF0_BRI_IRQ */
 	{55,  8, 16, 0,  8,  3},	/* SCIF0_TXI_IRQ */
 	{64,  8, 28, 0, 17,  3},	/* USBHI_IRQ */
 	{65,  8, 24, 0, 16,  3},	/* LCDC      */
-	/* 66, 67 unused */
 	{68,  8, 20, 0, 14, 13},	/* DMABRGI0_IRQ */
 	{69,  8, 20, 0, 13, 13},	/* DMABRGI1_IRQ */
 	{70,  8, 20, 0, 12, 13},	/* DMABRGI2_IRQ */
-	/* 71 unused */
 	{72,  8, 12, 0,  7,  3},	/* SCIF1_ERI_IRQ */
 	{73,  8, 12, 0,  6,  3},	/* SCIF1_RXI_IRQ */
 	{74,  8, 12, 0,  5,  3},	/* SCIF1_BRI_IRQ */
@@ -91,26 +82,71 @@ static struct intc2_data intc2_irq_table[] = {
 	{77,  8,  8, 0,  2,  3},	/* SCIF2_RXI_IRQ */
 	{78,  8,  8, 0,  1,  3},	/* SCIF2_BRI_IRQ */
 	{79,  8,  8, 0,  0,  3},	/* SCIF2_TXI_IRQ */
-	/*          | INTMSK4 */
 	{80,  8,  4, 4, 23,  3},	/* SIM_ERI */
 	{81,  8,  4, 4, 22,  3},	/* SIM_RXI */
 	{82,  8,  4, 4, 21,  3},	/* SIM_TXI */
 	{83,  8,  4, 4, 20,  3},	/* SIM_TEI */
 	{84,  8,  0, 4, 19,  3},	/* HSPII */
-	/* INTPRIOC | INTMSK4 */
-	/* 85-87 unused/reserved */
 	{88, 12, 20, 4, 18,  3},	/* MMCI0 */
 	{89, 12, 20, 4, 17,  3},	/* MMCI1 */
 	{90, 12, 20, 4, 16,  3},	/* MMCI2 */
 	{91, 12, 20, 4, 15,  3},	/* MMCI3 */
-	{92, 12, 12, 4,  6,  3},	/* MFI (unsure, bug? in my 7760 manual*/
-	/* 93-107 reserved/undocumented */
+	{92, 12, 12, 4,  6,  3},	/* MFI */
 	{108,12,  4, 4,  1,  3},	/* ADC  */
 	{109,12,  0, 4,  0,  3},	/* CMTI */
-	/* 110-111 reserved/unused */
 };
 
+static struct ipr_data sh7760_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 19, 0,  4, 2 }, /* TMU2 TIPCI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 28, 1,  8, 2 }, /* REF RCMI */
+	{ 29, 1,  8, 2 }, /* REF ROVI */
+	{ 32, 2,  0, 7 }, /* HUDI */
+	{ 33, 2, 12, 7 }, /* GPIOI */
+	{ 34, 2,  8, 7 }, /* DMAC DMTE0 */
+	{ 35, 2,  8, 7 }, /* DMAC DMTE1 */
+	{ 36, 2,  8, 7 }, /* DMAC DMTE2 */
+	{ 37, 2,  8, 7 }, /* DMAC DMTE3 */
+	{ 38, 2,  8, 7 }, /* DMAC DMAE */
+	{ 44, 2,  8, 7 }, /* DMAC DMTE4 */
+	{ 45, 2,  8, 7 }, /* DMAC DMTE5 */
+	{ 46, 2,  8, 7 }, /* DMAC DMTE6 */
+	{ 47, 2,  8, 7 }, /* DMAC DMTE7 */
+/* these here are only valid if INTC_ICR bit 7 is set to 1!
+ * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */
+#if 0
+	{  2, 3, 12, 3 }, /* IRL0 */
+	{  5, 3,  8, 3 }, /* IRL1 */
+	{  8, 3,  4, 3 }, /* IRL2 */
+	{ 11, 3,  0, 3 }, /* IRL3 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
 void __init init_IRQ_intc2(void)
 {
 	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
 }
+
+void __init  init_IRQ_ipr(void)
+{
+	make_ipr_irq(sh7760_ipr_map, ARRAY_SIZE(sh7760_ipr_map));
+}

arch/sh/mm/Kconfig

@@ -151,6 +151,7 @@ config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"
 	select CPU_SH4
 	select CPU_HAS_INTC2_IRQ
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH4_202
 	bool "Support SH4-202 processor"