CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On csrow-based memory controllers, we combine the csrow size from both
channels and there's no need to do that again in csrow_size_show which
leads to double the size of a csrow.

Fix it.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The first flag is ->csbased and will be used in common EDAC code later.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Make sure code pays attention to K8 having only one DCT, reformat and
cleanup code, correct debug messages, remove unused code.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Instead of open-coding it, use the DBAM_DIMM macro in
amd64_csrow_nr_pages() which we have already.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This basically reverts 603adaf6 ("amd64_edac: fix K8 chip select
reporting") because it was a clumsy workaround for DIMM sizes reporting
on K8 which got superceded by a much more correct one with 41d8bfab
("amd64_edac: Improve DRAM address mapping") without removing the prior
one. Remove it now finally.
Reported-by: NJosh Hunt <johunt@akamai.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Rewrite CE/UE paths so that they use the same code and drop additional
code duplication in handle_ue. Add a struct err_info which collects
required info for the error reporting. This, in turn, helps slimming all
edac_mc_handle_error() calls down to one.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

All families report a valid error address when encountering a DRAM ECC
error so no need to check it.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

When injecting DRAM ECC errors over the F3xB[8,C] interface, the machine
does this by injecting the error in the next non-cached access. This
takes relatively long time on a normal system so that in order for us to
expedite it, we disable the caches around the injection.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

amd64_get_dram_hole_info: remove local variable 'base'.
sys_addr_to_dram_addr: do not clear local variable 'ret'. Also, sanitize
constants formatting.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

If none of the elements in scrubrates[] matches, this loop will cause
__amd64_set_scrub_rate() to incorrectly use the n+1th element.

As the function is designed to use the final scrubrates[] element in the
case of no match, we can fix this bug by simply terminating the array
search at the n-1th element.

Boris: this code is fragile anyway, see here why:
http://marc.info/?l=linux-kernel&m=135102834131236&w=2

It will be rewritten more robustly soonish.
Reported-by: NDenis Kirjanov <kirjanov@gmail.com>
Cc: stable@vger.kernel.org
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.

The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.

The changes at the drivers were made by this small script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.

The changes at the EDAC drivers were done by this small perl script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The EDAC driver name doesn't help to handle EDAC errors. So,
remove it from the EDAC error messages, preserving only the
error_message.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Kernel kobjects have rigid rules: each container object should be
dynamically allocated, and can't be allocated into a single kmalloc.

EDAC never obeyed this rule: it has a single malloc function that
allocates all needed data into a single kzalloc.

As this is not accepted anymore, change the allocation schema of the
EDAC *_info structs to enforce this Kernel standard.
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now that the EDAC core supports struct device, there's no sense
on having any logic at the EDAC core to simulate it. So, instead
of adding such logic there, change the logic at amd64_edac to
use it.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev".  Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.

No functional changes.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now that all drivers got converted to use the new ABI, we can
drop the old one.
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.

Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Almost all edac	drivers	initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().

However, very few drivers actually use it:
        e752x_edac.c
        e7xxx_edac.c
        i3000_edac.c
        i82443bxgx_edac.c
        i82860_edac.c
        i82875p_edac.c
        i82975x_edac.c
        r82600_edac.c

There also a few other drivers that have their own calculus
formula internally using those vars.

All the others are just wasting time by initializing those
data.

While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.

However, such assumption is not true for all types of memory
controllers.

Controllers for FB-DIMM's don't have such requirements.

Also, modern Intel controllers seem to be capable of handling such
differences.

So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.

The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:

"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."

So use DEFINE_PCI_DEVICE_TABLE(x).

Based on PaX and earlier work by Andi Kleen.
Signed-off-by: NLionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Fix DRAM chip select sizes calculation for K8, revisions D and E.

Reported-by: Niklas Söderlund <niklas.soderlund@ericsson.com
Link: http://lkml.kernel.org/r/1320849178-23340-1-git-send-email-niklas.soderlund@ericsson.comSigned-off-by: NBorislav Petkov <borislav.petkov@amd.com>

While initializing the array of csrow attribute instances, a few csrows
were uninitialized. This happened because the module only performed a
check for DRAM base ctl register0's and not DRAM base ctl register1's
chip select enable bit. There could be systems with DIMMs populated
on only single memory channel whereas the module also assumed that a
dual channel dimm had double the memory size of a single memory channel
instead of checking the memory on each channel.

This patch fixes these above issues.
Signed-off-by: NAshish Shenoy <ashenoy@riverbed.com>
Signed-off-by: NPrasanna S. Panchamukhi <ppanchamukhi@riverbed.com>
Link: http://lkml.kernel.org/r/4F459CFA.5090604@riverbed.comSigned-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Sparse complains that edac_cap was declared as dev_type and we are
returning edac_type.  Historically, edac_type was correct but since
then we have changed it to return a bit field.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20111006063025.GA2615@mwandaSigned-off-by: NBorislav Petkov <borislav.petkov@amd.com>

When accessing the scrub rate control register (F3x58) on F15h, the DRAM
controller selector (F1x10C[DctCfgSel]) has to point to DCT0 so that the
scrub rate configuration can take effect. See Erratum 505 in the AMD
F15h revision guide for more details.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Drop third nbcfg argument which is old remains and not required anymore.

No functionality change.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

F15h CPUs may report a non-DRAM address when reporting an error address
belonging to a CC6 state save area. Add a workaround to detect this
condition and compute the actual DRAM address of the error as documented
in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

F15h and later use a portion of DRAM as a CC6 storage area. BIOS
programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by
subtracting the storage area from the DRAM limit setting. However, in
order for edac to consider that part of DRAM too, we need to include it
into the per-node range.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This warning was wrongfully added for a normal condition - intlvsel
actually selects the destination node when node interleaving is enabled
and it is not a mismatch. For a detailed example, see section 2.8.10.2
"Node Interleaving" in F10h BKDG.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This patch removes superfluous debugging output in the sysfs scrub rate
handler. It also consolidates the error handling in the scrub rate
accessors.
Signed-off-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

We check the pointers together but at least one of them could be invalid
due to failed allocation. Since we cannot continue if either of the two
allocations has failed, exit early by freeing them both.

Cc: <stable@kernel.org> # 38.x
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Those should all be unsigned.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Fix amd64_debug_display_dimm_sizes() arguments order per convention (pvt
is always first). Also, the now second arg denotes the DCT so adjust its
type.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The dram ranges make sense only as an unsigned type.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Use the macro directly instead
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Adjust argument types to the PCI config API's types.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Return unsigned u8 values only.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>