This patch reduces the size of struct hpsb_host and also removes
semaphores from ieee1394_transactions.c.  On i386, struct hpsb_host
shrinks from 10656 bytes to 6688 bytes.  This is accomplished by
 - using a single wait_queue for hpsb_get_tlabel instead of many
   instances of semaphores,
 - using a single lock to serialize access to all tlabel pools (the
   protected code regions are small, i.e. lock contention very low),
 - omitting the sysfs attribute tlabels_allocations.

Drawback:  In the rare case that a process needs to sleep because all
transaction labels for the node are temporarily exhausted, it is also
woken up if a tlabel for a different node became free, checks for an
available tlabel, and is put to sleep again.  The check is not costly
and the situation occurs extremely rarely.  (Tlabels are typically
only exhausted if there was no context switch to the khpsbpkt thread
which recycles tlables.)  Therefore the benefit of reduced tpool size
outweighs this drawback.

The sysfs attributes tlabels_free and tlabels_mask are not compiled
anymore unless CONFIG_IEEE1394_VERBOSEDEBUG is set.

The by far biggest member of struct hpsb_host, the struct csr_control
csr (5272 bytes on i386), is now placed at the end of struct hpsb_host.

Note, hpsb_get_tlabel calls the macro wait_event_interruptible with a
condition argument which has a side effect (allocation of a tlabel and
manipulation of the packet).  This side effect happens only if the
condition is true.  The patch relies on wait_event_interruptible not
evaluating the condition again after it became true.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Conflicts: drivers/ieee1394/hosts.c
Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling
with patch "ieee1394: fix kerneldoc of hpsb_alloc_host".
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

[PATCH 9/9] s390: qeth driver fixes [6/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
	- Hipersockets has no IPV6 support, thus prevent issueing
	  SETRTG_IPV6 control commands on Hipersockets devices.
	- fixed error handling in qeth_sysfs_(un)register
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 8/9] s390: qeth driver fixes [5/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
	fix kernel panic in qdio queue handling.
	qeth_qdio_clear_card() could be invoked by 2 CPUs
	simultaneously (for example reboot event and recovery).
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 7/9] s390: qeth driver fixes [4/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
	- fix kernel crash due to race,
	  set card->state to SOFTSETUP after
	  card and card->dev are initialized properly.
	- remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead,
	  as we want to have the ability to turn on/off the
	  statistics at runtime.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 6/9] s390: qeth driver fixes [3/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
       	fixed kernel panic caused by qeth driver:
        Using a bonding device qeth driver will realloc
        headroom for every skb coming from the bond device.
        Once this happens qeth frees the original skb and
        set the skb pointer to the new realloced skb.
        Under heavy transmit workload (e.g.UDP streams) through bond
        network device the qdio output queue might get full.
        In this case we return with EBUSY from qeth_send_packet.
        Returning to qeth_hard_start_xmit routine
        the skb address on the stack still points to the old address,
        which has been freed before.
        Returning from qeth_hard_start_xmit with EBUSY results in
        requeuing the skb. In this case it corrupts the qdisc queue
        and results in kernel panic.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 5/9] s390: qeth driver fixes [2/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
	- fixed error handling in create_device_attributes
	- fixed some minor bugs in IPv4
	  and IPv6 address checking
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 4/9] s390: qeth driver fixes [1/6]

From: Frank Pavlic <fpavlic@de.ibm.com>
	- Drop incoming packets with vlan_tag set
          if card->vlangrp is not set.
        - use always vlan_hwaccel_rx to pass
	  vlan frames to the stack.
        - fix recovery problem. Device was recovered
	  properly but still not working.
	  netif_carrier_on call right before
          recovery start fixes it.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 3/9] s390: Makefile cleanup

From: Frank Pavlic <fpavlic@de.ibm.com>
 	remove CONFIG_MPC from Makefile which was
	introduced accidently in the past.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[PATCH 2/9] s390: netiucv driver fixes

From: Frank Pavlic <fpavlic@de.ibm.com>
	- missing lock initialization added
        - avoid duplicate iucv-interfaces to the same peer
       	- rw-lock added for manipulating the list of
          defined iucv connections
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Hi Jeff,
this is a RESEND of the nine s390 network driver patches.
I finally found  that my kmail corrupted almost every patch
I sent the last time. Please apply these 9 patches and forget
about my first attempt! Sorry for the delay, I had some fights
with sendmail, IMAP and mutt configuration.

Frank

[RESEND PATCH 1/9] s390: minor s390 network driver fixes

From: Frank Pavlic <fpavlic@de.ibm.com>
	- iucv driver:
          use do { } while (0) constructs
	  instead of empty defines to avoid compile bugs.
        - ctc driver:
          missing lock initialization added
        - lcs driver:
          BUG_ON usage was removed accidently
	  with the last lcs patch.
          Put them back in place.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add the CPU identification needed by oprofile for Intel (r) Core (tm) 2
CPUs.
Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: "Arun Sharma" <aruns@google.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: Increase the IB CM retry count in CMA
  IPoIB: Retry failed send-only multicast group joins
  IB/srp: Don't schedule reconnect from srp

In some special case (padding because of sync or umount) it can be possible
that summary information is not fit to the end of the erase block.  In
these cases the collecting of summary is disabled for this erase block.

The problem was that this was not respected by jffs2_sum_add_kvec().  This
patch fix this bug.
Signed-off-by: NFerenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the case of data-pad-ecc-pad-data...  layout the oob start position has
to be sizeof(data) in nand_write_oob_syndrom().

In nand_fill_oob() we need to copy to buf + buffer offset instead of buf +
write offset.
Signed-off-by: NVitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ext3-get-blocks support caused ~20% degrade in Sequential read
performance (tiobench). Problem is with marking the buffer boundary
so IO can be submitted right away. Here is the patch to fix it.

  2.6.18-rc6:
  -----------
  # ./iotest
  1048576+0 records in
  1048576+0 records out
  4294967296 bytes (4.3 GB) copied, 75.2726 seconds, 57.1 MB/s

  real    1m15.285s
  user    0m0.276s
  sys     0m3.884s

  2.6.18-rc6 + fix:
  -----------------
  [root@elm3a241 ~]# ./iotest
  1048576+0 records in
  1048576+0 records out
  4294967296 bytes (4.3 GB) copied, 62.9356 seconds, 68.2 MB/s

The boundary block check in ext3_get_blocks_handle needs to be adjusted
against the count of blocks mapped in this call, now that it can map
more than one block.
Signed-off-by: NSuparna Bhattacharya <suparna@in.ibm.com>
Tested-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I think there is a bug in kmod.c: In __call_usermodehelper(), when
kernel_thread(wait_for_helper, ...) return success, since wait_for_helper()
might call complete() at any time, the sub_info should not be used any
more.

Normally wait_for_helper() take a long time to finish, you may not get
problem for most of the case.  But if you remove /sbin/modprobe, it may
become easier for you to get a oop in khelper.

Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

`make headers_check' wants to go and write stuff in /lib/modules, which
requires root, whic is unfortunate.

In fact, there's no _particular_ reason for headers_install to put it there
either -- it can go into a subdirectory of the build tree in both cases.
It's not intended to go directly into /usr/include, which is why we didn't
put it there -- and we certainly don't want people screwing around with
symlinking to it.  It's for distributors to take away and do stuff with, so
leaving it in $(objtree) is fine, even in the headers_install case.

I picked $(objtree)/usr/include but I have no _particular_ preference
for that; it just seemed reasonable.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix two problems with the CONFIG_EMBEDDED submenu:

(1) The menu was split in two by the rt_mutex patch, which moved
    half the items into the "General setup" menu.

(2) CONFIG_SYSCTL and CONFIG_UID16 were added to the main menu
    instead of the submenu.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Alpha currently fails 'make headers_check' in the 2.6.18-rc kernels.  This
patch fixes it, by moving the existing #ifdef __KERNEL__ in asm/page.h so that
it covers everything that userspace shouldn't so, and by adding asm/compiler.h
to the list of exported files so that its use within asm/byteorder.h is
successful.

[ Note that at least with GCC 4, <linux/compiler.h> doesn't do the forced
  inlining about which there are nasty comments (and a workaround) in
  <asm/compiler.h>, unless you set CONFIG_FORCED_INLINING.  Rather than keep
  the mess you have in <asm/compiler.h> you could perhaps just make sure
  CONFIG_FORCED_INLINING=n is also honoured with GCC3, and make sure it cannot
  be set for Alpha? ]
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Tue, 2006-09-12 at 17:44 +0100, David Woodhouse wrote:
> asm-x86_64/elf.h requires asm/processor.h, which does not exist
> asm-x86_64/signal.h requires linux/linkage.h, which does not exist
> asm-x86_64/unistd.h requires linux/linkage.h, which does not exist
> asm-x86_64/vsyscall.h requires linux/seqlock.h, which does not exist

Again, move stuff which shouldn't be visible inside (mostly already existing)
#ifdef __KERNEL__.

This fixes a bunch of mislabelled and unlabelled #endifs in unistd.h and also
cleans that up to conform with what's visible on other architectures, since
the minimal fix for the error reported about would have involved a more
intrusive patch, renesting other ifdefs.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This brings i386 asm/unistd.h into consistency with other architectures by not
exporting functionality which is not necessary.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Tue, 2006-09-12 at 17:44 +0100, David Woodhouse wrote:
> asm-ia64/ptrace.h requires asm/asm-offsets.h, which does not exist
> asm-ia64/resource.h requires asm/ustack.h, which does not exist

Hide parts which shouldn't be visible to userspace.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Tue, 2006-09-12 at 17:44 +0100, David Woodhouse wrote:
> asm-s390/debug.h requires linux/string.h, which does not exist
> asm-s390/elf.h requires asm/system.h, which does not exist

Move things around slightly so the right things end up within
#ifdef __KERNEL__ and thus don't pollute the exported headers.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We generate an <asm/foo.h> which includes either <asm-$ARCH/foo.h> or
<asm-$ALTARCH/foo.h> as appropriate.  But we were doing this dependent on
whether the file in question existed in the _unexported_ tree, not the
exported tree.  So if a file was exported to userspace in one asm- directory
but not the other, the generated file in asm/ was incorrect.

This only changed the failure mode if it _was_ included from a nice #error to
a less explicable #include failure -- but it also gave false errors in 'make
headers_check' output.  Fix it by looking in the right place instead.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The kernel build system supports making symbol type files (*.symtypes) from C
source files.  Add these files to .gitignore.
Signed-off-by: NJosh Triplett <josh@freedesktop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The kernel build system supports making mixed source and assembly listings
(*.lst) from C source files.  Add these files to .gitignore.
Signed-off-by: NJosh Triplett <josh@freedesktop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The kernel build system supports making preprocessed files (*.i) from C source
files.  Add these files to .gitignore.
Signed-off-by: NJosh Triplett <josh@freedesktop.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If one of the OEM flags becomes set in the flags from the hardware, the
driver could hang if no OEM handler was set.  Fix the code to handle this.
This was tested by setting the flags by hand after they were fetched.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Ackde-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NRoss Biro <rossb@google.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=7152

Cc: Michael Tautschnig <tautschn@model.in.tum.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Inodes earlier than the 'first' inode (e.g.  journal, resize) should be
rejected early - except the root inode.  Also inode numbers that are too
big should be rejected early.

[akpm@osdl.org: cleanup]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This prevents bad inode numbers from triggering errors in ext2_get_inode.

[akpm@osdl.org: speedup, cleanup]
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When the ipmi_si module is loaded on a system without any ipmi device, it
fails with nodev.  It would be fine if all resources were freed.  A call to
device_unregister() is missing, resulting to a oops when you remove the
ipmi_msghandler.
Signed-off-by: NArnaud Patard <apatard@mandriva.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a bug where the IRQ_PENDING flag is never cleared and the ISR is called
endlessly without an actual interrupt.
Signed-off-by: NImre Deak <imre.deak@solidboot.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

3 seems like a low number of IB Communication Manager retries to set;
we see connections failing under stress, and in any case 3 just looks
like an arbitrary number.  15 is the max value allowed by the
InfiniBand spec.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When a send-only multicast group join fails, mcast->query must be set
to NULL.  Otherwise, IPoIB will never retry the join and the multicast
group will never be reachable.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If there is a problem in the connection, the SCSI mid-layer will
eventually call srp_reset_host(), which will call srp_reconnect(), so
we do not need to schedule a call to srp_reconnect_work() from
srp_completion().

Removing this prevents srp_reset_host() from failing if a reconnect
scheduled from srp_completion() is already in progress, which in turn
was causing crashes as both SCSI midlayer and srp_reconnect() were
cancelling commands.
Signed-off-by: NIshai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix a missing call to dma_unmap_single() in the receive path.  Without
this call, errors have been observed on non-cache-coherent systems.

Signed-off-by Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>